Beats Beats Solo3 Wireless Bedienungsanleitung
Set up and use your Solo3 Wireless
headphones
Here's everything you need to know to make the most of your Solo3Wireless headphones.
1. Turn on
Press and hold the power button for about a second to turn your headphones on or off.
2. Set up
Follow these steps if you have an iPhone using iOS 10. When you set up your
headphones in this way, they set up automatically with your other devices that are signed
in to iCloud and using iOS 10, macOS Sierra or watchOS 3.
1. Hold your headphones next to your unlocked iPhone.
2. Press the power button on your headphones for 1 second.
3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the power
button on your headphones for 5 seconds.
4. Follow the instructions on your iPhone.
If you have another Bluetooth device, follow these steps to pair your headphones to that
device:
5. Press the power button for 5 seconds. When the fuel gauge flashes, your headphones
are discoverable.
6. Go to Bluetooth settings on your device.
7. Select your headphones from the list of discovered Bluetooth devices.
3. Connect to a different device
Your headphones automatically reconnect to the last device you used with them. To
connect to a different device, follow these steps.
For iPhone X using iOS 11 or later:
1. Open Control Centre by swiping down from the top-right corner of the screen.
2. The audio card appears. Tap the AirPlay icon in the top-right corner of the card, then
choose your headphones from the list of playback devices.
For iPhone, iPad or iPod touch using iOS 11 or later:
3. Open the control centre by swiping up from the bottom edge of the screen.
4. The audio card appears. Tap the AirPlay icon in the top-right corner of the card, then
choose your headphones from the list of playback devices.
iPhone, iPad or iPod touch using iOS 10:
5. Open the control centre by swiping up from the bottom edge of the screen.
6. Swipe to the side in the control centre to show the Now Playing card.
7. Tap the device name in the corner of the card, then choose your headphones from the
list of playback devices. If you don't see your headphones, follow the steps for all other
devices, below.
All other devices:
8. Go to Bluetooth settings on your device. On your Mac, you can just click the Bluetooth
icon in the menu bar.
9. Select your headphones from the list of Bluetooth devices. If you don't see your
headphones after a few seconds, press and hold the power button for 5 seconds.
4. Charge
Plug your headphones into a power source using the included micro USB cable. As the
headphones charge, the fuel gauge lights flash. When charging is complete, all five lights
will remain lit.
Your headphones provide up to 40 hours of playback from 2 hours of charging, and up to
3 hours of playback from a 5-minute charge.
To conserve battery or use your headphones when the battery is depleted, plug in the
RemoteTalk cable to use your headphones in wired mode.
5. Control
To control audio playback, use the b button on the left ear cup, or the centre button on the
included RemoteTalk cable.
oPress once to play or pause audio playback.
oPress twice to skip to the next track. Press three times to skip backwards.
oPress twice and hold on the second press to scan forwards through a track. Press three
times and hold on the third press to scan backwards through a track.
To control playback volume, use the volume buttons on the left ear cup or the
RemoteTalk cable. To control call volume, use the volume controls on your phone.
oPress and release the volume up button, or press and hold to increase volume
continuously.
oPress and release volume down button, or press and hold to decrease volume
continuously.
To control phone calls, use the b button on the left ear cup, or the centre button on the
RemoteTalk cable.
oPress once to answer or end a call.
oPress once to answer a second incoming call and put the first call on hold. When two
calls are active, this switches between calls.
oPress and hold for 1 second to reject an incoming call.
oPress twice to stop listening through your headphones and send the call to the phone.
To activate Siri on your iOS device or the voice-command feature on another device, use
the 'b' button on the left ear cup, or the centre button on the RemoteTalk cable. Just press
and hold until you hear a chime, then say what you need.
To check the fuel gauge, which shows battery level and charging status, press and release
the power button.
6. Reset
0. Hold down these two buttons for 10 seconds:
Power button
Volume down button
1. When the fuel gauge flashes, release the buttons. Your headphones have now been
reset and are ready to be set up with your devices again.
7. Update
Your headphones are automatically kept up to date when they're set up with an iPhone
using iOS 10.
Andere Handbücher für Beats Solo3 Wireless
3
Inhaltsverzeichnis
Andere Beats Kopfhörer Handbücher
Beats
Beats Beats by Dr. Dre Leitfaden
Beats
Beats Solo2 Bedienungsanleitung
Beats
Beats Solo HD Bedienungsanleitung
Beats
Beats MIXR Bedienungsanleitung
Beats
Beats EP Bedienungsanleitung
Beats
Beats MH BTS HTC ON SO WH WW Bedienungs- und Wartungshandbuch
Beats
Beats Headphones Bedienungsanleitung
Beats
Beats Studio Buds Bedienungsanleitung
Beats
Beats executive Bedienungsanleitung
Beats
Beats MIXR Bedienungsanleitung
Beats
Beats Headphones Bedienungsanleitung
Beats
Beats Beats Studio Bedienungsanleitung
Beats
Beats Solo2 Bedienungsanleitung
Beats
Beats Beats Dr. Dre Solo Bedienungsanleitung
Beats
Beats Solo 2 Bedienungsanleitung
Beats
Beats powerbeats 2 B0516 Bedienungsanleitung
Beats
Beats Tour2 Bedienungsanleitung
Beats
Beats MIXR Bedienungsanleitung
Beats
Beats PowerBeats Sport Bedienungsanleitung
Beats
Beats Beats Studio Bedienungsanleitung
