2N C-CURE 9000 Bedienungsanleitung

Configuration & User Guide

2N Intercoms Integration for C•CURE 9000

Security Classification:

Protected

Version:

1.0

Revision:

Rev1

Control:

Uncontrolled

when printed

Date

07/03/2022

Configuration & User Manual: 2N IP Intercoms and CCURE 9000 
COPYRIGHT © 2022 2N Telekomunikace a.s. All rights reserved 
 
 
Table of Contents 
 
PART 1 PREFACE 5 
1 FINDING MORE INFORMATION 5 
1.1 C•CURE 9000 MANUALS 5 
1.2 ONLINE HELP 5 
1.3 CONVENTIONS 6 
PART 2 INTRODUCTION 7 
1 2N INTERCOMS INTEGRATION OVERVIEW 7 
2 2N INTERCOMS INTEGRATION COMPONENTS 8 
3 2N INTERCOMS INTEGRATION UTILIZATION 8 
3.1 TERMINOLOGY 8 
4 2N INTERCOMS SYSTEM CONFIGURATION 8 
5 C•CURE 9000 CONFIGURATION 8 
6 LICENSING THE 2N INTERCOMS INTEGRATION PRODUCT 9 
6.1 C•CURE LICENSE 9 
6.2 2N LICENSE 9 
PART 3 INSTALLATION 10 
1 2N INTERCOMS INTEGRATION DRIVER INSTALLATION 10 
2 STARTING THE C•CURE 9000 SERVER SERVICES 13 
2.1 REMOTE SQL CONFIGURATION 13 
3 UNINSTALLING THE 2N INTERCOMS INTEGRATION 14 
PART 4 C•CURE 9000 ENTERPRISE ARCHITECTURE CONSIDERATION 15 
1 ENTERPRISE ARCHITECTURE CONSIDERATION 15 
2 INSTALLATION ORDER 15 
3 INTERCOM CONFIGURATION IN AN ENTERPRISE ARCHITECTURE 15 
4 CREATING AN INTERCOM 15 
5 MAS AND SAS ACTIONS 16 
PART 5 C•CURE HARDWARE TREE 17 
1 HARDWARE TREE PANE 17 
PART 6 2N INTERCOMS CONFIGURATION 18 
1 2N INTERCOMS OVERVIEW 18 
2 2N INTERCOM TABS 18 
3 ACCESSING THE 2N INTERCOM SERVER PANE 18 
3.1 TO ACCESS THE 2N INTERCOMS SERVER PANE 18 
4 CREATING A 2N INTERCOM OBJECT 19 
4.1 TO CREATE A 2N INTERCOM 19 
5 DELETING A 2N INTERCOM OBJECT 20 

Configuration & User Manual: 2N IP Intercoms and CCURE 9000 
COPYRIGHT © 2022 2N Telekomunikace a.s. All rights reserved 
 
 
5.1 TO DELETE A 2N INTERCOM OBJECT 20 
6 GENERAL TAB 21 
6.1 GENERAL TAB 22 
6.2 TRIGGERS TAB 23 
6.3 TO CREATE A CUSTOM EVENT 23 
6.4 CONFIGURING 2N EVENT TRIGGERS 26 
7 STATE IMAGES TAB 27 
7.1 CUSTOMIZING STATE IMAGES 27 
7.2 RESTORE A DEFAULT STATE IMAGE 27 
PART 7 CALL MANAGEMENT 28 
1 HARDWARE TREE 28 
2 DYNAMIC VIEW 28 
3 MAPS 30 
PART 8 UNLOCKING A C•CURE DOOR ON DTMF ACTIVATION 31 
PART 9 MAP CONFIGURATION 32 
1 CONFIGURING A MAP 32 
2 MAP ANNUNCIATIONS 36 
2.1 CONFIGURING MAP ANNUNCIATIONS 36 
PART 10 C•CURE 9000 ALERTS AND JOURNALING SYSTEM 38 
1 JOURNALING OVERVIEW 38 
2 ACCESSING EVENT VIEWER AND ACTIVITY MONITOR 38 
2.1 TO ACCESS ACTIVITY MONITOR 38 
2.2 INTERPRETING JOURNAL MESSAGES 38 
2.3 JOURNAL MESSAGES SUPPORTED 39 
PART 11 TROUBLESHOOTING THE 2N INTEGRATION 40 
APPENDIX 1 –CONFIGURATION OF 2N DEVICES 41 
INTRODUCTION 41 
SYSTEM OVERVIEW 41 
2N INTERCOM BASIC CONFIGURATION AND PREREQUISITES 41 
1. LAN CONNECTION SETTING -2N IP INTERCOM 41 
2. LAN CONNECTION SETTING -2N MASTER STATION 43 
SETTING CALLING BETWEEN 2N IP INTERCOM AND 2N MASTER STATION 44 
1. 2N IP INTERCOM SETUP 44 
2. 2N MASTER STATION SETUP 48 
3. 2N IP INTERCOM HTTP API ACTIVATION 49 
 
 

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

Part 1 Preface

The 2N Intercoms Integration user manual is for new and experienced security system users who want to

learn to use this product for the C•CURE 9000 Security Management System.

1.1 Finding More Information

You can access C•CURE 9000 manuals and online Help for more information about C•CURE 9000 on the

Software House Portal.

1.1.1 C•CURE 9000 Manuals

C•CURE 9000 software manuals are available in Adobe PDF format on the C•CURE 9000 installation

media. You can access the manuals if you copy the appropriate PDF files from the C•CURE 9000

installation media Manuals\CCURE folder.

The available C•CURE 9000 Software House manuals are listed in the C•CURE 9000 Installation and

Upgrade Guide.

These manuals are also available from the Software House Member Center website:

(http://www.swhouse.com/TechnicalLibrary/TechLibSW.aspx).

1.1.2 Online Help

You can access C•CURE 9000 Help by pressing F1 or clicking Help from the menu bar in the

Administration/Monitoring Station applications.

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

1.1.3 Conventions

This manual uses the following text formats and symbols.

Convention

Meaning

Bold

This font indicates screen elements, and also indicates when you should take

direct action in a procedure. Bold font describes one of the following items:

•A command or character to type, or

•A button or option on the screen to press, or

•A key on the keyboard to press

•A screen element or name

blue colour text

Indicates a hyperlink to a URL, or a cross-reference to a figure, table, or section

in this guide.

Regular Italic font

Indicates a new term.

<text>

Indicates a variable.

The following items are used to indicate important information.

NOTE

Indicates a note. Notes call attention to any item of information that may be of special

importance.

TIP

Indicates an alternate method of performing a task.

Indicates a caution. A caution contains information essential to avoid damage to the

system. A caution can pertain to hardware or software.

Indicates a warning. A warning contains information that advises users that failure to

avoid a specific action could result in physical harm to the user or the hardware.

Indicates a danger. A danger contains information that users must know to avoid death

or serious injury.

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

Part 2 Introduction

This chapter introduces the 2N Intercoms Integration software that provides integration between the 2N

Intercoms and C•CURE 9000 access security management.

2.1 2N Intercoms Integration Overview

The C•CURE 9000 2N Intercoms Integration product provides integration between the 2N Intercoms and

the C•CURE 9000 Security Management System.

The C•CURE integration provides client components, server components and a Windows service. It is

based on a standard C•CURE CrossFire integration and provides the following features:

•2N Intercoms Editor

•Journal activity

•Event triggers based on server state

The integration driver acts as an interface between 2N Intercoms and the C•CURE access control system.

The solution has one main data flow component:

Outbound JSON data (driver): The driver monitors 2N intercoms through the use of their JSON REST API.

This allows the driver to retrieve the status of the devices and issue commands.

2N Master Station

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

2.2 2N Intercoms Integration Components

The C•CURE 9000 2N Intercoms Integration product introduces the following object into the C•CURE

9000 database to facilitate the integration between 2N Intercoms and C•CURE 9000.

•2N Intercoms –This represents the interface from C•CURE to 2N Intercoms where all

connection parameters are set.

2.3 2N Intercoms Integration Utilization

2.3.1 Terminology

The table below lists some terms and definitions related to the C•CURE 9000 2N Intercoms Integration

Product.

Term

Definition

2N Intercom

The configuration server object in C•CURE that represents the driver

interface between C•CURE and 2N Intercoms systems. The server object is

where all connection parameters are configured.

2N Intercoms Integration

Represents the C•CURE 9000 integration driver

2.4 2N Intercoms System Configuration

Configuration of 2N Intercoms systems is described in Appendix 1 of this document. There are some

environmental prerequisites for connectivity:

•API

oAPI connection needs to be enabled on the intercoms.

•Firmware

oFirmware needs to match the supported firmware. Please check the release notes for the

supported firmware version.

2.5 C•CURE 9000 Configuration

The C•CURE 9000 Administration Workstation is used to configure C•CURE 9000 objects. You must

configure the following objects in C•CURE 9000 for the 2N Intercoms Integration to function properly.

•2N Intercoms Server objects.

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

2.6 Licensing the 2N Intercoms Integration Product

This integration has two licensing requirements:

2.6.1 C•CURE License

The 2N Intercoms Integration product is a licensed option for a C•CURE 9000 Server. You must purchase

this license from Software House support to use the software. In an Enterprise architecture, the MAS and

any SAS you wish to run the integration on must be licensed.

Only the server is licensed. You can have as many client connections as C•CURE is licensed for.

When you access the C•CURE 9000 License application on your C•CURE 9000 server, you can see if your

license includes the Cruatech - 2N Intercoms - Integration product by running the C•CURE 9000

Licensing program (Start>All Programs>Tyco>C•CURE 9000>Licensing) and clicking the Options tab. If

the Cruatech - 2N Intercoms - Integration product is selected, you have a valid license.

If you do not have a license for the 2N Intercoms Integration product, contact Software House to

purchase a license.

2.6.2 2N License

The server component also requires 2N licensing applied. The license screen is part of the installation

process:

Note: Steps to obtain/install license are described in the Installation section.

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

Part 3 Installation

This chapter explains how to install and uninstall the 2N Intercoms Integration.

3.1 2N Intercoms Integration driver installation

1. Copy 2N-Intercoms-x.x.x.x.exe file to the local disk on the target C•CURE machine. The same

installation file may be run on standalone, MAS and SAS C•CURE servers and C•CURE clients.

2. From your local disk run 2N-Intercoms-x.x.x.x.exe as Administrator.

2N -Integration Setup appears:

3. Select the I agree to the license terms and conditions checkbox and click Install.

The following window appears:

4. Click Next.

If you are on a C•CURE server, the License Configuration screen appears:

Configuration & User Manual: 2N IP Intercoms and CCURE 9000

5. Copy the Hardware Identifier using the Copy button and contact 2N Distributor to receive your

license. Once you have received your license file, copy it onto the server and click Browse to the

file path. Click Next.

6. The Destination Folder screen appears:

7. Click Next.

8. If the C•CURE server is on a domain, you will be prompted for Administrator credentials to

proceed with installation. Enter Domain, Login ID and Password details. Click Next to proceed:

Inhaltsverzeichnis

Andere 2N Gegensprechanlage Handbücher

2N Helios IP Uni Bedienungsanleitung

2N Analog Vario Bedienungsanleitung

2N Helios Force Bedienungsanleitung

2N Helios IP Bedienungsanleitung

2N Helios Uni Bedienungsanleitung

2N Helios IP Automation Merkblatt

2N Helios IP Bedienungsanleitung

2N Helios IP Safety Bedienungsanleitung

2N OMEGA Lite Bedienungsanleitung

2N IP Verso Bedienungsanleitung

2N Lift1 Compact Referenzhandbuch

2N Indoor View Bedienungsanleitung

2N Helios Force Bedienungsanleitung

2N Helios IP Uni Bedienungsanleitung

2N Helios Fehlerbehebungshandbuch

2N Helios IP Bedienungsanleitung

2N Helios IP Force Bedienungsanleitung

2N 9154100 Bedienungsanleitung

2N IP Video Kit Bedienungsanleitung

2N Helios IP Force Bedienungsanleitung

2N Helios IP Vario Bedienungsanleitung

2N IP Safety Bedienungsanleitung

2N Helios IP Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung