2N Helios IP Force Bedienungsanleitung

2N TELEKOMUNIKACE a. s., Modřanská 621, 143 01 Praha 4, Czech Republic, tel.: +420 261 301 111, fax: +420 261 301 999,

e-mail: [email protected] IČO: 26183960, DIČ: CZ 26183960, Společnost je zapsaná v obchodním rejstříku vedeném Městským soudem

v Praze, oddíl B, vložka 6613. Č.Ú.: 51-1400870237/0100, 714154001/2400, 188430466/0300 www.2n.cz

How to install tamper switch to protect Helios IP against

unauthorized entry

This manual is valid for Helios IP Force and Helios IP Safety. You can use RFID card

reader as well as additional relay to place tamper switch!

Also mind that HW tamper switch can be used in Helios IP UNI, more info you can find in

installation manual of Helios IP UNI!

Since 2013 will be tamper switch attached to CPU, so you will have possibility to

configure function which will be started when activation tamper switch will be done,

more info in configuration manual!

1. As very first step you have to uncover front panel. Use torx screw 4 mm (Pic. 1). In

the (Pic. 2) see necessary accessories you will need during the installation.

Pic. 1 Pic. 2 Pic. 3

2. Then you need to remove key panel. Use cross-point screw driver.

Pic. 4

2N TELEKOMUNIKACE a. s., Modřanská 621, 143 01 Praha 4, Czech Republic, tel.: +420 261 301 111, fax: +420 261 301 999,

e-mail: [email protected] IČO: 26183960, DIČ: CZ 26183960, Společnost je zapsaná v obchodním rejstříku vedeném Městským soudem

v Praze, oddíl B, vložka 6613. Č.Ú.: 51-1400870237/0100, 714154001/2400, 188430466/0300 www.2n.cz

3. Remove screw stick and replace it by smaller one which you will find attached in box,

see (Pic. 2). After replacing of smaller screw stick (Pic. 3) place RFID card

reader/Additional relay to the connector (Pic. 5).

Pic. 5

4. In the (Pic. 6) you can see already placed RFID card reader (Additional relay can be

also used!!!).

Pic. 6

2N TELEKOMUNIKACE a. s., Modřanská 621, 143 01 Praha 4, Czech Republic, tel.: +420 261 301 111, fax: +420 261 301 999,

e-mail: [email protected] IČO: 26183960, DIČ: CZ 26183960, Společnost je zapsaná v obchodním rejstříku vedeném Městským soudem

v Praze, oddíl B, vložka 6613. Č.Ú.: 51-1400870237/0100, 714154001/2400, 188430466/0300 www.2n.cz

5. Then place key panel back. On the right side you can see connector for tamper switch

(Pic. 7).

Pic. 7

6. In the (Pic. 8.) you can see tamper switch placed.

Pic. 8

2N TELEKOMUNIKACE a. s., Modřanská 621, 143 01 Praha 4, Czech Republic, tel.: +420 261 301 111, fax: +420 261 301 999,

e-mail: [email protected] IČO: 26183960, DIČ: CZ 26183960, Společnost je zapsaná v obchodním rejstříku vedeném Městským soudem

v Praze, oddíl B, vložka 6613. Č.Ú.: 51-1400870237/0100, 714154001/2400, 188430466/0300 www.2n.cz

8. Once you will cover front plate, then two black buttons will be pressed, it will switch

on NO a C of the terminal block and close the circuit (Pic. 10). Since then if somebody

will try to entry the door IP intercom it will undo the circuit and send some information

to particular security localization (Pic. 11).

Pic. 9

Pic. 10 Pic. 11

Andere Handbücher für Helios IP Force

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung