3Jtech ILP 0001 Bedienungsanleitung
ILP 0001
User’s Manual
Revision 1.0
3J Tech Co., Ltd.
342 Fu-Hsing N. Rd., 2F
Taipei, Taiwan
Tel: +886-2-2500 6916
3JTech (A3J Eng.), Inc.
15344 E. Valley Blvd., Suite C
City of Industry, CA 91746 USA
Tel: 1-626-934 7600
Revision History
Revision Date Changes
1.0 March 19,2007 First Release / Kiwi Huang
Related Documents or Files
1) ISSC ISBTM8-3 Bluetooth Module specification..
2) SI3014 silicon DAA data sheet.
3) IP568x –DS-P02-010815 modem chip set data sheet
4) BPM 0001 & ILP 0001 Instruction manual
Table of Contents
General Description Application Specification Block diagram AT
commands
General Description
The ILP 0001 is a highly integrated, low-cost, high performance, and low-power
dissipation wireless modem. This wireless modem implements V.90 to achieve
Internet connection rates up to 56Kbps, supporting existing V.34 data mode, DTE
terminal and provide reliable connection with connection rate ranging from
300bps up to 115200bps
ISSC ISBTM8-3 Bluetooth Class1 module Transmitter power meet Class 1
requirement RF-Wireless Frequency 2400-2483.5 MHz Fully 723K bps data rate
speed RF output power -2 dBm--+16 dBm (class 1) High receiving sensitivity (-88
dBm 0.1%BER)
Application
Wireless modem.
Stand-alone modem
Internet Access.
Remote Access and control.
Specification
. Data mode capabilities: . ITU-T V.90 . ITU-T V.34 . ITU-T V.32bis, V.32 .
ITU-T V.22bis,V.22 . ITU-T V.23, V.21 . Bell 212 . Bell 103 . V.42 error
correction (LAPM and MNP) . V.42bis and MNP class 5 data compression .
TIA/EIA 602 standard for AT command set . DTE speed up to 115200
Comply with Bluetooth Class 1 Transmitter power meet Class 1 requirement
RF-Wireless Frequency 2402-2480 MHz Fully 723K bps data rate speed RF
output power -2 dBm--+16 dBm (class 1) High receiving sensitivity (-88
dBm 0.1%BER)
ITEMS SPECIFICATION
Supply Voltage VDD: 3.3V+/-0.2V Regulated supply
voltage
Carrier Frequency 2400MHz to 2483.5MHz( USA ,
Spain ,France)
Modulation Method GFSK,1Mbps,0.5BT Gaussian
Asynchronous:723.2kbps/57.6kbps
Maximum Data Rate
Synchronous:433.9kbps/433.9kbps
Transmission Power +16dBm to –2dBm
Hopping 1600hops/sec, 1MHz channel space
Sensitivity -88dBm
Operation Temperature -10 to +60 degree
Absolute Max Supply
Voltage 3.6V for VDD,other VDD +0.3V
ACX
Advanced Ceramic X
AT9520 Series
Multilayer Chip Antenna
Features
Monolithic SMD with small, low-profile and
light-weight type.
Wide bandwidth
Applications
2.4GHz WLAN, Home RF, Bluetooth Modules,
etc.
Specifications
Part Number Frequency
Range
(MHz)
Peak Gain
(XZ-V) Average Gain
(XZ-V) VSWR Impedance
AT9520-
B2R4HAA_ 2400~2500 3.0 dBi typ. 1.0 dBi typ. 2 max. 50 Ω
Q’ty/Reel (pcs) : 1000pcs
Operating Temperature Range : -40 ~ +85oC
Storage Temperature Range : -40 ~ +85oC
Power Capacity : 3W max.
PartNumber
AT 9520 - B2R4 HAA
g
h
f
e
d
c
cType AT : Antenna dDimensions ( L × W ) 9.5× 2.0 mm
eMaterial Code BfFrequency Range 2R4=2400MHz
gSpecification Code HAA hPackaging T: Tape & Reel
B: Bulk
TerminalConfiguration
No. Terminal Name No. Terminal Name
cFeeding Point dNC
dc
IDEAL LIFE Pod™
Location/Interferance
When using an IDEAL LIFE Pod™ to communicate information from your IDEAL LIFE BP-Manager™,
wireless radio waves are used. For maximum distance and interference-free operation, the
recommended IDEAL LIFE Pod™ location is:
Note:
While using an IDEAL LIFE Pod™, the telephone line will be in use. If the telephone line is in use
before using the your IDEAL LIFE Pod™ and you wish to use the your IDEAL LIFE Pod™ while the
telephone line is being used, the unit will not be able to make a connection and will store the
information in your IDEAL LIFE BP-Manager™ for later transmission.
IDEAL LIFE Pod™ Location/Interferance
Instruction Manual 6
•In a HIGH and CENTRAL
location with no obstructions
such as walls
•Away from electrical appliances such as a TV, personal computer
or a cordless phone
Before You Start
To assure the correct use of the product basic safety measures should always be followed including
the precautions listed below:
•Read all information in the instruction manual and any other literature included in the box before
using the unit.
•Follow the instructions of your healthcare provider.
•Contact your physician for specific information about your blood pressure.
•Operate the unit only as intended. Do not use for any other purpose.
•This product is intended for information purposes only. It is not intended for diagnostic purposes
and is not intended and should not be used on infants or children (anyone under the age of 18).
•This is not a clinical device, but a tool for information purposes only.
•Changes or modifications not approved by IDEAL LIFE INC. may affect the proper functioning of
this product. Do not disassemble or attempt to repair the unit or components.
YOUR IDEAL LIFE
BP-Manager™
REMEMBER: You can stop the inflation or deflation process anytime by
pressing any button.
Before You Start
IDEAL LIFE BP-Manager™ and IDEAL LIFE Pod™
7
Display
Left “Soft” Button
START/ESCAPE
Button
Right “Soft”
Button
Upper
Arm
Cuff
Battery Cover
YOUR IDEAL LIFE Pod™
Before You Start
Instruction Manual 8
Power button
LED Display
AC Adapter Jack
Telephone line cord RJ11
Jack For Telephone
Connection
Telephone line cord RJ11
Jack For Line Connection
Battery Cover
Installation
! FOR YOUR IDEAL LIFE Pod™ !
Connecting your IDEAL LIFE Pod™
USING AN RJ11 JACK
CAUTION!
•Unplug phone cord from wall before installing, plugging in an external power source, or changing
batteries.
•Never install telephone wiring during a lightning storm.
•Never touch uninsulated telephone wire or terminals, unless the telephone line has been
disconnected at the network interface.
•Use caution when installing or modifying telephone lines.
Plug one end of the telephone line cord (provided) into the jack on the back of your IDEAL LIFE Pod™
marked LINE.
Note: The IDEAL LIFE Pod™ is designed not to draw power from the
batteries when the AC adapter is in use.
Plug the other end of the telephone line cord (provided)
into a modular wall jack.
If you wish to use the same modular wall jack for your
IDEAL LIFE Pod™ and your telephone, connect the telephone
line cord from your telephone into the jack on the back of
your IDEAL LIFE Pod™ marked PHONE.
Connect the small end of the power supply into the power
AC jack on the back of the IDEAL LIFE Pod™ marked
POWER. Plug the other end into an AC power outlet.
Installation
IDEAL LIFE BP-Manager™ and IDEAL LIFE Pod™
9
Press the POWER button on top of the IDEAL LIFE Pod™
to begin.
RECHARGING BATTERIES WITH YOUR IDEAL LIFE POD™:
•Remove the battery compartment door on the bottom of your IDEAL LIFE Pod™ by pushing gently
in the direction shown on the battery cover.
•Place the rechargeable batteries as marked.
•Replace the battery compartment door and push the compartment door shut in the opposite
direction shown on the battery cover.
•When using rechargeable batteries with your IDEAL LIFE BP-Manager™, simply place them in your
IDEAL LIFE Pod™ for 10 hours to recharge when battery status is low as indicated on your IDEAL
LIFE BP-Manager™.
Installation
Instruction Manual 10
Inhaltsverzeichnis
Andere 3Jtech Modem Handbücher
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung