3M PELTOR PIC-100 Bedienungsanleitung
Menu
Quick Reference Guide
Bluetooth® Button
Answer Bluetooth® call: Quick press
Reject Bluetooth® call: Long press
Hang up Active Bluetooth® call: Long press
Fit Test/Channel Button
Perform Daily Check: Hold for
6 seconds or longer
Perform Fit Test: Hold for 2 seconds
Channel select: Quick press to cycle through
(+) Button
Volume up
Menu settings: When menu is active,
quick press to cycle through each option
of a setting
(-) Button
Volume down
Menu settings: When menu is active,
quick press to cycle through each option
of a setting
Power/Menu Button
Power on/o: Hold for 5 seconds
Menu: Quick press to enter menu and
cycle through menu settings
Push-to-Talk Button (PTT)
Push-to-Talk: Press and hold
to talk on close-connect radio
VOX mode/ PTT mode: Double-press
Status Light
Indicates Bluetooth® connection status,
battery status, and close-connect status
Channel Lights
Indicate current channel,
volume status, Daily Check result,
FitTest result,and
Bluetooth® call activity
To enter Menu mode, quick press
the Power/Menu button (1) and
cycle through the menu items.
Use the (+) and (-) buttons to
adjust each items’
respective setting.
Each short press of the
Power/Menu button toggles to
the next menu item.
Fit Test
Before carrying out a real-time fit test, ensure that both earplugs are
fitted. Noise must be present when test is performed. For example, fit
test in an area that requires hearing protection or where you need to raise
your voice to be heard by a person who is at least an arms-length away.
To start a real-time fit test:
Press and hold the Fit test/channel button (2) for 2 seconds.
The real-time fit process begins and can be observed by the channel light
indicators (1). See page 2 for details.
Menu Structure
11 Reset default menu
9 Automatic power o
3 Bluetooth® call volume
8 Delete all paired devices
7 VOX sensitivity
4 Battery status
5 Eartip selection
6 Bluetooth® pairing
10 Language
2 Radio volume
12 Software version
13 Calibration status
1 Environmental volume
3M™PELTOR™Professional In-Ear Communication Headset, PIC-100
TM
3M PSD products are occupational use only | Always read and follow all User Instructions
Channel Lights
Status Light
Powering
On/O
Fit Test
Volume
Bluetooth®
Calls
Channel
Powering on Powering o
Left ear conclusive
Right ear inconclusive
Conclusive
for both ears
Both earpieces pass Left earpiece pass
Right earpiece fail
Right earpiece pass
Left earpiece fail
Both earpieces fail
Fit test error
(blinking)
Inconclusive for both ears
Right ear conclusive
Left ear inconclusive
Current channel
Daily check in progress
Environmental volume
Ex.: volume level 4
Close-connect
radio volume
No network
connected
Bluetooth® call volume Bluetooth® streaming
volume
Incoming
Bluetooth® call
Active Bluetooth® call
Active volume muted
Unit has been on the
same channel for longer
than 2 seconds
PTT mode:
receiving
(Solid white)
PTT mode:
transmitting
(Blinking white)
(Dim white)
PTT mode:
No activity
VOX mode:
transmitting
(Blinking orange)
VOX mode:
receiving
(Solid orange)
VOX mode:
No activity
(Dim orange)
CLOSE-CONNECT RADIO BLUETOOTH®
PAIRING
(Blinking blue)
Bluetooth® pairing mode
Once paired, status LED will
double-blink blue, then stay on
for 4 seconds. After 4 seconds,
status LED resumes activity
prior to pairing.
Channel
Lights
Status
Light
Fit test in progress
Ex.: channel 4
Each channel light represents a
corresponding number from 1 to 6,
used to indicate channel number
and volume levels.
1 2 3 5 6
(Power o lasts 2
seconds. Automatic
power o lasts 10
Daily Check
(Blinking white)
3M Personal Safety Division
3M Center, Building 235-2W-70
St. Paul, MN 55144-1000
© 2022, 3M. All Rights Reserved. 3M, ALERT, E-A-R buds, PELTOR, WP, and Worktunes are trademarks of
3M Company and its ailiates. Used under license in Canada. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by 3M is under license.
4
3M Canada
P.O. Box 5757
London, Ontario
N6A 4T1
Andere 3M Headset Handbücher
3M
3M PELTOR WS LiteCom Pro III Bedienungsanleitung
3M
3M Peltor SportTac Bedienungsanleitung
3M
3M Peltor WS Alert XP MRX21*WS5 Series Bedienungsanleitung
3M
3M Pro-Protect Bedienungsanleitung
3M
3M PELTOR WS LiteCom Pro III MT73H7 4D10EU Bedienungsanleitung
3M
3M PELTOR PIC-100 Bedienungsanleitung
3M
3M Peltor Comtac V Bedienungsanleitung
3M
3M PELTOR WS MT73H74610WS6NA Series Bedienungsanleitung
3M
3M PELTOR WS LiteCom Plus Bedienungsanleitung
3M
3M PELTOR ComTac VI Bedienungsanleitung
3M
3M PELTOR LiteCom Plus MT7H7 4410-EU Series Bedienungsanleitung
3M
3M Peltor LiteCom Plus MT7H7A4410-EU Bedienungsanleitung
3M
3M Peltor Twin Cup MT72H540P3 50 Series Bedienungsanleitung
3M
3M Peltor WS ProTac XP MT15H7 WS5 Series Bedienungsanleitung
3M
3M PELTOR CH-3 FLX2 Bedienungsanleitung
3M
3M Peltor WorkTunes HRXS220A Bedienungsanleitung
3M
3M G5 Bedienungsanleitung
3M
3M HEADSET C1060 Betriebsanleitung
3M
3M PELTOR LiteCom Bedienungsanleitung
3M
3M Peltor Alert M2RX7A2-01 Bedienungsanleitung
