3M Matic Accuglide 2+ Datenblatt
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page i
Instructions and Parts List
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the “Spare
Parts/Service Information” section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic™Accuglide™2+
Type 10500
Upper and Lower
Standard Taping Heads
3 Inch
Serial #:
For reference, record machine serial number here.
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page ii
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page iii
Replacement Parts and Service Information
To Our Customers:
This is the 3M-Matic™/AccuGlide™/Scotch®equipment you ordered.
It has been set up and tested in the factory with Scotch®Tapes.
Included with each machine is an Instructions and Parts List manual.
Identication Plate
For Commercial Use Only
Technical Assistance / Replacement Parts and Additional Manuals:
For technical assistance, contact our help line at 1-800-328-1390.
Provide the customer support coordinator with the model/machine name,
machine type, and serial number that are located on the identication plate
(For example: Model - Accuglide 2+ (3 inch) Taping Head - Type 10500 - Serial Number 13282).
To order replacement parts, contact us:
CSPD division of Combi Packaging Systems LLC.
5365 East Center Dr. N.E.
Canton,OH 44721
1-800-344-9883
e-mail: CSPD-[email protected]
www.combi.com
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page iv
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page v
Replacement Parts and Service Information (continued)
To Our Customers:
This is the 3M-Matic™/AccuGlide™/Scotch®equipment you ordered. It has been set up
and tested in the factory with Scotch®tapes.
Included with each machine is an Instructions and Parts List Manual.
Order parts by part number, part description, and quantity required.
Also, when ordering parts or additional manuals, include model/machine name,
machine type, and serial number that are located on the identication plate.
Service, replacement parts, and additional manuals available direct from:
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page vi
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page vii
Table of Contents - Manual 2: Accuglide 2+ Standard - 3 inch
(Upper and Lower Taping Heads)
Accuglide 2+ Standard Taping Head Manual - 3 inch Page
Cover Page
Replacement Parts and Service Information . . . . . . . . . . . . . . . . . . . . . i – ii
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii – v
Equipment Warranty and Limited Remedy. . . . . . . . . . . . . . . . . . . . . . . . . vii
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Taping Head Contents / How to Use Manual . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Dimensional Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Receiving and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tape Leg Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tape Width Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Tape Loading – Upper Taping Head. . . . . . . . . . . . . . . . . . . . . . . . . . 10
Tape Loading – Lower Taping Head. . . . . . . . . . . . . . . . . . . . . . . . 10-11
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Blade Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Blade Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Blade Oiler Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Applying/Bung Roller Replacement . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Tape Latch Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tape Drum Friction Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Applying Mechanism Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
One-Way Tension Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Tape Leg Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Leading Tape Leg Length Adjustment . . . . . . . . . . . . . . . . . . . . 16
Changing Tape Leg Length - 70 to 50 mm [2-3/4 to 2 Inch] 16
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18
Spare Parts/Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Recommended Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Replacement Parts and Service. . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
Replacement Parts Illustrations and Parts List . . . . . . . . 21-End of Manual
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page viii
Warranty
Warranty
Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY,
THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND
ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING,
A CUSTOM OR USAGE OF TRADE:
3M sells its 3M-Matic™Accuglide 2+ Taping Head Type 10500
with the following warranties:
1. The Taping Head blade, springs and rollers will be free from defects in material and
manufacture for ninety (90) days after delivery.
2. All other Taping Head parts will be free from defects in material and manufacture for
three (3) years after delivery.
If any part is defective within this warranty period, your exclusive remedy and 3M’s and
seller’s sole obligation shall be, at 3M’s option, to repair or replace the part. 3M must
receive actual notice of any alleged defect within a reasonable time after it is discovered,
but in no event shall 3M have any obligation under this warranty unless it receives such
notice within ve (5) business days after the expiration of the warranty period.
All notices required hereunder shall be given to 3M solely through the 3M-Matic™ Help
line. To be entitled to repair or replacement as provided under this warranty, the part
must be returned as directed by 3M to its factory or other authorized service station
designated by 3M. If 3M is unable to repair or replace the part within a reasonable time
after receipt thereof, 3M, at its option, will replace the equipment or refund the purchase
price. 3M shall have no obligation to provide or payfor the labor required to remove any
part or equipment or to install the repaired or replacement part or equipment. 3M shall
have no obligation to repair or replace those parts failing due to normal wear, inadequate
or improper maintenance, inadequate cleaning, non-lubrication, improper operating
environment, improper utilities, operator error or misuse, alteration or modication,
mishandling, lack of reasonable care, or due to any accidental cause.
Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable
for any loss or damage arising from this 3M equipment, whether direct, indirect, special,
incidental, or consequential, regardless of the legal theory asserted, including breach of
warranty, breach of contract, negligence, or strict liability.
Note: The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability
may be changed only by a written agreement signed by authorized representatives
of 3M and seller.
AccuGlide™, Scotch™, and 3M-Matic™are Trademarks of 3M, St. Paul, Minnesota 55144-1000
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page 1
Intended Use
The intended use of the AccuGlide™ 2+ Upper and Lower Taping Heads - 3 inch is to
apply a “C” clip of Scotch®pressure-sensitive lm box sealing tape to the top and/or
bottom center seam of regular slotted containers. These taping heads are incorporated
into most standard 3M-Matic™ case sealers. The compact size and simplicity of the
taping head also makes it suitable for mounting in box conveying systems other than
3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or
stapling heads in existing case sealing machines. The AccuGlide™ 2+ Upper and Lower
Taping Heads - 3 inch have been designed and tested for use with Scotch®pressure-
sensitive lm box sealing tape.
AccuGlide™ 2+ STD 3 Inch Upper Taping Head, Type 10500
NA - ENG
April 2017
3M-Matic™Accuglide 2+ - 3 Inch Taping Head
Page 2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere 3M Etikettendrucker Handbücher
