3M MPRO110 - VGA LCOS Projector Handbuch

3M™Micro Professional Projector

MPro110

Operator’s Guide

3M™Micro Professional Projector MPro110

Operator’s

Guide

Contents

Intended Use Statement ......................................................................................... 3

Trademarks and Copyrights .................................................................................... 3

Safety Information.................................................................................................. 3

Safety Labels......................................................................................................... 5

Package Contents.................................................................................................. 7

Parts ..................................................................................................................... 7

Getting Started ...................................................................................................... 8

Operating Instructions .......................................................................................... 10

Troubleshooting ................................................................................................... 13

Speciﬁcations ...................................................................................................... 14

Limited Warranty.................................................................................................. 16

3M™Micro Professional Projector MPro110

Operator’s

Guide

Intended Use Statement

The 3M™Micro Professional Projector MPro110 is designed to operate with the 3M-speciﬁed

battery and 3M battery charger and in a normal ofﬁce and home environment.

10˚–27˚C (50˚–80˚F)•

10–80% RH (without condensation)•

0–1,829 m (0–6000') above sea level•

The ambient operating environment should be free of airborne smoke, grease, oil and other

contaminants that can affect the operation or performance of the projector.

Use of this product in adverse conditions will void the product warranty.

Trademarks and Copyrights

3M is a trademark of 3M Company.

VGA and XGA are trademarks of International Business Machines Corporation.

S-VGA is a registered trademark of the Video Electronics Standards Association.

No publication or commercial use may be made of this material without the express written

permission of 3M.

Safety Information

Please read, understand, and follow all safety information contained in these instructions prior

to the use of this projector. Retain these instructions for future reference.

Explanation of Signal Word Consequences

m Warning: Indicates a potentially hazardous situation, which, if not avoided, could result in

death or serious injury and/or property damage.

m Caution: Indicates a potentially hazardous situation, which, if not avoided, may result in minor

or moderate injury and/or property damage.

3M™Micro Professional Projector MPro110

Operator’s

Guide

m Warning

To reduce the risk associated with hazardous voltage:

Do not modify this product in any way. Use only 3M approved replacement•

components.

Do not attempt to service this projector other than battery replacement. There are•

no user serviceable parts other than the battery. Service to be performed only by a

3M-authorized service provider using 3M-approved system components.

Do not use the wall power supply in a wet environment.•

Do not use with a damaged wall power supply. Replace damaged part prior to use.•

To reduce the risk associated with ﬁre and explosion:

Do not immerse the projector or battery in any liquid or allow either to get wet.•

Use only wall power supply and Li-Ion battery provided.•

Do not disassemble, short or expose the battery to high temperature.•

Do not overcharge or rapidly discharge the battery.•

Do not dispose of the battery by incineration or ﬁre.•

Do not operate this projector in any environment above 100°F (38°C).•

Do not expose the projector or battery to direct sunlight in a closed space such as•

a vehicle.

To reduce the risks associated with driver distraction in a moving motor vehicle:

Do not use this projector in a moving motor vehicle.•

m Caution

To reduce the risk associated with environmental contamination:

Dispose of all system components in accordance with applicable government•

regulations.

To reduce the risks associated with LED visible bright light:

Do not stare directly into the LED light beam.•

To reduce the risks associated with tripping and falling:

Position the charging cord and data cables so that they can not be tripped over.•

SAVE THESE INSTRUCTIONS

3M™Micro Professional Projector MPro110

Operator’s

Guide

Safety Labels

CLASS 1 LED PRODUCT

FCC STATEMENT - CLASS B

This equipment generates, uses and can radiate radio frequency energy, and if not installed

and used in accordance with the instruction manual may cause interference to radio

communications. It has been tested and found to comply with the limits for a Class “B”

computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed

to provide reasonable protection against such interference when operated in a residential

installation. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

NOTICE: This Class B digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le

matériel brouilleur du Canada.

3M™Micro Professional Projector MPro110

Operator’s

Guide

INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC

equipment provided that the following conditions are met. The cables may have to be used

with the core set to the projector side. Use the cables which are included with the projector

or speciﬁed.

Note: Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

CE Statement

ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive

Low Voltage Directive: Meets 2006-95-EC Directive.

WEEE Statement

The following information is only for EU-members States:

The mark shown to the right is in compliance with Waste Electrical

and Electronic Equipment Directive 2002/96/EC (WEEE). The

mark indicates the requirement NOT to dispose the equipment as

unsorted municipal waste, but use the return and collection systems

according to local law.

RoHS Statement

3M Projection Systems can provide RoHS certiﬁcation for products meeting the RoHS

directive.1

European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,

1 RoHS compliant means that the product or part does not contain any of the substances in excess of the

following maximum concentration values in any homogeneous material, unless the substance is in an

application that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for

cadmium. This information represents 3M’s knowledge and belief, which may be based on information

provided by third party suppliers to 3M.

3M™Micro Professional Projector MPro110

Operator’s

Guide

Package Contents

Projector1

Battery Charger/AC Adapter2

Video Cable3

VGA Cable4

Battery5

RCA Adapter6

Note: In some regions, the

battery charger/AC adapter will

come with an outlet adapter.

1 2

3 4

5 6

Parts

Focus Wheel1

Lens2

Power On/Off3

Video IN4

VGA IN5

Power and Charge LEDs6

DC Power IN7

3M™Micro Professional Projector MPro110

Operator’s

Guide

Getting Started

Install Battery

The 3M MPro110 comes with a rechargeable Lithium-Ion (Li-Ion) battery. The battery should

be charged before using the projector with the battery.

Important Note: Switch projector OFF and disconnect all cables before installing the

battery. Use only the 3M-speciﬁed battery: 78-6969-9974-3.

To install the battery: remove screw, slide the back cover off, insert the battery, and reinstall

the cover.

m Caution

To reduce the risk associated with explosion:

Only replace the battery with the 3M approved battery.•

To reduce the risk of environmental contamination:

Dispose of used battery according to applicable local, state, and federal regulations.•

3M™Micro Professional Projector MPro110

Operator’s

Guide

Charge the Battery

The 3M MPro110 comes with a battery charger/AC adapter. Use the battery charger/AC

adapter to power the projector when the battery is not charged or installed and to charge the

battery. When the battery needs charging, the image will turn black and the Power LED will

ﬂash red.

To charge the battery: (1) Turn the power switch OFF. (2) Connect the battery charger/AC

adapter to the projector’s DC in. (3) Plug the battery charger/AC adapter into an electrical

outlet. (4) The charge LED lights orange while the battery is charging. The battery will be fully

charged in about 2 hours. (5) Once charging is complete, the charge LED will turn off.

Note: The battery will not charge when the power switch is in the ON position. Turn the

power switch OFF to charge battery.

3M™Micro Professional Projector MPro110

Operator’s

Guide

Operating Instructions

Connecting to a Video Source

There are many devices that output video signals: digital cameras, video phones, and portable

video players. The 3M MPro110 can project the video from these devices using its video port.

(1) Connect the included video cable to the projector (2) Connect the video cable to the video

source’s cable or the video output port.

NOTE: If the two cables have the same connector on the end, use the RCA adapter to

connect the two cables.

Andere Handbücher für MPRO110 - VGA LCOS Projector

Inhaltsverzeichnis

Andere 3M Projektor Handbücher

3M Digital Projector X30 Installations- und Betriebsanleitung

3M WX20 - Digital Projector WXGA LCD Handbuch

3M 3805 Einrichtungshandbuch

3M X90W Handbuch

3M MPRO150 Bedienungsanleitung

3M Digital Projector X30N Handbuch

3M MP220 Installations- und Betriebsanleitung

3M Multimedia Projector MP8640 Handbuch

3M DX70i Handbuch

3M X31i Montage- und Wartungsanleitung

3M Multimedia Projector MP8030 Handbuch

3M Multimedia Projector MP8749 Bedienungsanleitung

3M Overhead Projector 1700 Bedienungsanleitung

3M 2000 Bedienungsanleitung

3M Digital Projector X30N Handbuch

3M SCP715 Handbuch

3M X56 Handbuch

3M X95I - Digital Projector XGA LCD Installations- und Betriebsanleitung

3M Digital Media Systems 800 Series Leitfaden

3M Roku Bedienungsanleitung

3M MP8640 - MP XGA LCD Projector Handbuch

3M Digital Projector X30N Installations- und Betriebsanleitung

3M 2770 Bedienungsanleitung

3M 1810 Einrichtungshandbuch

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

Epson

Epson PowerLite 810p Bedienungsanleitung