3M 10008 Bedienungsanleitung

Andere 3M Atemwegsprodukt Handbücher

Beliebte Atemwegsprodukt Handbücher anderer Marken

Omron

Omron COMP A-I-R NE-C801 Bedienungsanleitung

CERES

CERES nosko nebulizer kit Bedienungsanleitung

Dr.Frei

Dr.Frei NE-SM1 Bedienungsanleitung

North

North 5400 series Bedienungsanleitung

John Bunn

John Bunn Neb-u-Lite LX2 Bedienungsanleitung

DeVilbiss

DeVilbiss UltraNeb Bedienungsanleitung

Sperian

Sperian Panther Hip-Pac P9684 Series Bedienungsanleitung

Dräger

Dräger X-plore 6570 Bedienungsanleitung

Respironics

Respironics SideStream HS860 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

JARDIBRIC

JARDIBRIC KPBRU20 Bedienungsanleitung

Ombra

Ombra 63506 Bedienungsanleitung

Lotus

Lotus M-9520A Bedienungsanleitung

Philips

Philips Respironics EE Leak 1 AF541 Bedienungsanleitung

EVOLU

EVOLU Nano AiR MINI Bedienungsanleitung

Ambu

Ambu SPUR II Bedienungsanleitung

MSA AUER

MSA AUER 3S-PF Bedienungsanleitung

MSA

MSA C420 Bedienungsanleitung

Wearing your elastomeric

full face, 6 strap respirator

Fully loosen all

six head straps.

Pull hair back

with one hand.

Bring facepiece

up to face with

other hand.

While holding

the facepiece in

place, pull the

straps over

your head.

Tighten the two

bottom straps.

Tighten the two

middle straps,

then the two

top straps.

Fitting Instructions for 3M

TM

Elastomeric

Full Face 6 Strap Respirator

10008

page 1 of 2

3

Issue Date 01/01/04

Check the seal of your elastomeric full face, 6 strap

respirator each time you don the respirator.

1. Positive Pressure User Seal Check

Place the palm of your hand over the exhalation valve cover and

exhale gently. The facepiece should bulge slightly. If air leaks

between the face and the faceseal of the respirator, reposition it and

adjust the straps for a tighter seal. If you cannot achieve a proper

seal, do not enter the contaminated area. See your supervisor.

2. Negative Pressure User Seal Check

Using Particulate Filters

Place your thumbs over the

center of the particulate filters

and inhale gently. The facepiece

should collapse slightly. If air

leaks between the face and the

faceseal of the respirator,

reposition it and adjust the

straps for a tighter seal. If you

cannot achieve a proper seal,

do not enter the contaminated

area. See your supervisor.

Using Cartridges

Place the palms of your hands

over the cartridges and inhale

gently. The facepiece should

collapse slightly. If air leaks

between the face and the

faceseal of the respirator,

reposition it and adjust the

straps for a tighter seal. If you

cannot achieve a proper seal,

do not enter the contaminated

area. See your supervisor.

1

2

3

4

3MTM Fitting Instructions for 3MTM Elastomeric

Full Face 6 Strap Respirator

10008

page 2 of 2

Important

Before using these respirators,

you must determine the following:

1. The type of contaminant(s)

for which the respirator is

being selected.

2. The concentration level

of contaminant(s).

3. Whether the respirator can be

properly fitted on the wearer’s

face. Do not use with beards,

on other facial hair, or other

conditions that prevent a good

seal between the face and the

faceseal of the respirator.

4. Before use of these respirators,

a written respiratory protection

program must be implemented,

meeting all the requirements

of OSHA 29 CFR 1910.134,

including training, medical

evaluation and fit testing.

These respirators help reduce exposure to

certain airborne contaminants. Misuse may

result in sickness or death. Before use, the

wearer must read and understand User

Instructions provided as a part of product

packaging. Time use limitations may apply.

For proper use, see package instructions,

supervisor or call 3M OH&ESD Technical

Service in U.S.A., 1-800-243-4630. In Canada,

call 1-800-267-4414.

WARNING

!

fax: (858) 488-6320 tel: (858)488-3300 [email protected] www.NBCsafety.com

World Leaders in Defense Technology

NBC Safety