3M 4220P Bedienungsanleitung

July 2011

78-8135-5992-5-B 3

3M™Add-On Terminal 4220P 400-Pair and

Jumper Trough

Expanding a 40-Type Cabinet

Instructions

2 78-8135-5992-5-B

Contents

1.0 General ............................................................................................................................................................................... 3

2.0 Cabinet Overall Description............................................................................................................................................... 3

3.0 Tools Required ................................................................................................................................................................... 4

4.0 Kit Contents ....................................................................................................................................................................... 4

5.0 3M™Add-On Terminal 4220P 400-Pair Installation.......................................................................................................... 7

6.0 3M™Jumper Trough Installation...................................................................................................................................... 10

7.0 Accessories....................................................................................................................................................................... 16

378-8135-5992-5-B

1.0 General

1.1 The 3M™Add-On Terminal 4220P 400-Pair is an outdoor enclosure designed to be mounted on the side of an

existing cross-connect cabinet to provide additional cross-connect capacity without having to retrofit or replace the

existing cabinet. The add-on terminal comes in two colors, has a powder-coated steel housing and is supplied with

3M™Self-Strip Block 4320 or 3M™Quick Connect System (QCS) 2810 Blocks.

1.2 The 3M™Jumper Trough is an expandable channel that may be installed in an existing cross-connect cabinet to

house jumpers that run between the cabinet and an add-on terminal.

2.0 Cabinet Overall Description

2.1 3M Add-On Terminal 4220P 400-Pair

6.28"

48.04"

10.88"

21.02"

16.16"

2.2 3M Jumper Trough

Fully Extended

39.85"

4.30"

8.96"

23"

Closed

4 78-8135-5992-5-B

3.0 Tools Required

A. Normal hand tools needed for a mechanical job, i.e. socket set, open-end wrenches, etc.

B. Power screwdriver, power reciprocating saw, grinder

C. 216 tool

D. Safety glasses

E. Protective gloves

F. Electric drill with 9/32" drill bit and generator

G. 3" hole saw

H. 1 1/2" hole saw

I. Metal-cutting saw

Note: Carefully follow safety, health and environmental information given on product label or the Materials Safety Data

Sheet (MSDS).

Installation site should facilitate construction, safety, installation, and maintenance.

The side of the cabinet to which the 3M™Add-On Terminal Kit 4220P will be installed should provide sufficient

clearance for future access.

4.0 Kit Contents

4.1 Kit Contents for 4220P Terminal

4220P-SSHCTO/400-400/T-A (G) 400-pair housing with 3M™710 Splicing Modules

almond/green cabinet color

4220P-SSHCTO/400-400/GBM-A (G) 400-pair housing with 3M™MS2™ Splicing Modules 4005-GBM/TR

almond/green cabinet color

A. Template for cutting holes

B. Enclosure

C. 400-pair frame preterminated with splice modules (710 or 4005 GBM modules)

D. 3M™Self-Strip Single-pair Probe and Dish 4327-A

E. Scotch®Rubber Mastic 2228, 2" x 3' roll

Note: Visually inspect all components. If any component is missing or appears damaged, do not install.

Call 3M customer service at 1-800-426-8688 for a replacement product.

3M™Self-Strip Block

4320 shown

578-8135-5992-5-B

4.2 Kit Contents for 3M™Jumper Trough

A. 3-piece adjustable trough

B. Scotch®Rubber Mastic 2228, 2" x 3' roll

C. Pan head self-tapping screws (2)

D. Template for cutting hole

Note: Trough contains two pre-installed cable ties

Note: Visually inspect all components. If any component is missing or appears damaged, do not install.

Call 3M customer service at 1-800-426-8688 for a replacement product.

3M™Bonding Kit for 40-Type Cabinet

Note: For non-pivot 40-type frames, use accessory bonding kit.

6 78-8135-5992-5-B

40-type cabinet non-pivot frame

40-type cabinet pivot frame

778-8135-5992-5-B

Cover plate

4.3 Remove gravel.

Note: Prior to the installation of the 3M™Add-On Terminal 4220P 400-Pair and 3M™Jumper Trough, open cabinet

doors and remove base cover plate at the bottom front of the cabinet. Remove excess gravel and make sure

no cables are in the way before using saw or grinders. Remove all ground wires and protect face of cross-

connect frame.

5.0 3M™Add-On Terminal 4220P 400-Pair Installation

5.1 Remove door assembly.

5.2 Remove 3M™Self-Strip Block or 3M™Quick Connect System (QCS) 2810 Block Frame from 4220P Add-On

Terminal Kit.

8 78-8135-5992-5-B

5.3 Remove the knockouts for entry of the self-strip block tails and jumper. Lower the existing frame inside the cabinet

and move conductors away from the area where drilling will take place.

Note: Non-pivot frames in 40-type cabinet may have center frame support along both sides of cabinet. In this

case, use bottom cutouts on 400-pair. Use right-hand opening for right mounting and left-hand opening for

left mounting.

3" opening

2 1/2" cable port for right-

mounting non-pivot

2 1/2" cable port for left-

mounting non-pivot

Right-mount 3" jumper port

openings

Left-mount 3" jumper

port openings

Bottom line

Align with cabinet seam

5.4 Use template supplied with 3M™Add-On Cabinet 4220P 400-Pair Kit to mark mounting and cable port holes.

Note: Align the bottom line where the base is connected to the upper cabinet housing.

978-8135-5992-5-B

cable port

jumper port

5.5 Mark the location of entrance between cabinets on the wall of the existing cabinet. This should be centered on the

trough opening. Drill a 3" hole for the jumper run to the trough.

Note: For non-pivot frames, use 2 1/2" hole as center frame. Supports along the inside of the cabinet may get in the

way of drilling hole. Bottom two markings on template are for non-pivot frame.

Rubber mastic

around

hole

5.6 Install bolts and nuts to secure the 3M™Add-On Terminal 4220P 400-Pair to the side of the cabinet and tighten.

Thread the 3M™Self Strip Block tails from the frame through the openings for the splice chamber and secure the

frame to the terminal.

5.7 Secure the tails from the terminal to the splice hanger bars in the splice chamber using cable ties. Raise the frame

and tighten bolts to secure the frame.

5.8 File burrs from all cut edges.

Note: Install Scotch®Rubber Mastic 2228 around cut holes on cabinet and 4220P housing.

10 78-8135-5992-5-B

6.0 3M™Jumper Trough Installation

Center template between bolts on front plate

Bolts Bolts

Center template between ground plate

6.1 Center template for trough over top frame area to be cut away.

1 1/2"

6.2 Drill 1 1/2" hole in the face plate of cabinet using 1 1/2" hole saw to create an entrance hole for the

reciprocating saw.

Inhaltsverzeichnis

Andere 3M Touch-Terminal Handbücher

3M 4488 Bedienungsanleitung

3M 4588V-QCS Series Bedienungsanleitung

3M G5 Bedienungsanleitung

3M 4588IPT Series Bedienungsanleitung

3M FDTC 08S Bedienungsanleitung

3M Dynapro ET 3170 Terminal Series B Bedienungsanleitung

3M 4790V Series Bedienungsanleitung

3M 4588VTP Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung