3One data NP301 Bedienungs- und Wartungsanleitung

NP301 Serial Device Server

Quick Installation Manual

3onedata Co., Ltd.

Address:

3/B, Zone 1, Baiwangxin High Technology

Industrial Park, Xili, Nanshan District, Shenzhen

Website:

www.3onedata.com

Tel :

+86 0755-26702688

Fax:

+86 0755-26703485

【Package Checklist】

Please check whether the package and accessories are intact

while using the serial device server for the first time.

Serial device server × 1

Power adapter × 1

Straight-through cable × 1

5-pin terminal block

3-pin terminal block

Qualify certificate × 1

Warranty card × 1

If any of these items are damaged or lost, please contact our

company or dealers, we will solve it ASAP.

【Product Overview】

This product is a serial device server. Model as follow: NP301

(Single Ethernet, 1-port RS-232 or RS-485/422)

【Panel Design】

Top view

Side view and front view

Bottom view

1. RS-485/422 serial port

2. RS-232 serial port

3. Ethernet port link/act indicator

4. Serial port transmission or receive data indicator

5. Power supply status indicator

6. Wall mounting kit

7. 10/100Base-T(X) copper port

8. Restore factory settings button

9. Terminal block for power input

【Mounting Dimension】

Unit: mm

Note Before Mounting:

Don't place or install the device in area near water or

moist, keep the relative humidity of the device

surrounding between 5%~95% without condensation.

Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the

device.

The device surface temperature is high after running,

please don't directly contact to avoid scalding.

【Wall Mounting】

Mounting the Device

On the wall of device mounting, place the device onStep 1

the wall for reference or reference the mounting

dimension to mark two screw position.

Nail two M4 screws on the wall and keep 2mmStep 2

interspace reserved.

Hang the device on two screws and slideStep 3

downward, then tighten the screw to enhance

stability, mounting ends.

Device Disassembling

Device power off.Step 1

Unscrew the screw on the wall about 2mm.Step 2

Lift the device outward slightly; take out the device,Step 3

disassembling ends.

【Power Supply Connection】

DC power supply

This device provides 3-pin power supply input

terminal blocks (V-, FG, V+). The power supply

support anti-reverse protection.

Power supply range: 9～48VDC

Note:

Power ON operation: first connect power line to the

connection terminal of device power supply, then power

on.

Power OFF operation: first unpin the power plug, then

remove the power line, please note the operation order

above.

【Restore Default Settings】

Setup is restoring default

settings button. Restoring

default settings steps as

follows: Press and hold the

setup button, disconnect the power supply and then give the

device to power up, wait for about 3~4 seconds to restore the

factory settings.

【Serial Port Connection】

This device provides 1-port RS-232 or RS-485/422 serial port

optional.

RS-232 serial port

RS-232 adopt DB9-Male connecter, the pin

definition is shown in the follow table:

PIN 1 2 3 4 5 6 7 8 9

RS-232

–

RXD

TXD

DTR

GND

DSR

RTS

CTS

–

RS-485/422 serial port

RS-485/422 adopt 5-pin 5.08mm pitch

industrial terminal blocks. The pin

definition is shown in the follow table:

PIN 1 2 3 4 5

RS-485 D+ D- GND ––

RS-422 T+ T- GND R+ R-

【Checking LED Indicator】

The device provides LED indicators to monitor the device

working status with a comprehensive simplified

troubleshooting; the function of each LED is described in the

table as below:

LED

Indicate

Description

PWR

ON The power connection is operating

normally.

OFF The power is not connected or is not

working properly.

LINK

ON The Ethernet interface has established an

active network connection.

Flashing

The Ethernet interface is in a network

activity state.

OFF The Ethernet interface does not establish

an active network connection.

Rx/Tx

OFF

No data or abnormal data is being

received or transmitted through serial port.

Flashing

Serial port is receiving or transmitting data.

【Logging in to WEB Interface】

This device supports WEB management and configuration.

Computer can access the device via Ethernet interface. The

way of logging in to device’s configuration interface via IE

browser is shown as below:

Configure the IP addresses of computer and theStep 1

device to the same network segment, and the

network between them can be mutually accessed.

Enter device’s IP address in the address bar of theStep 2

computer browser.

Enter device’s username and password in the loginStep 3

window as shown below.

Click “OK” button to login to the WEB interface ofStep 4

the device.

Note:

The default IP address of the device is “192.168.1.254”.

The default username and password of the device is

“admin”.

If the username or password is lost, user can restore it to

factory settings via device DIP switch or management

software; all modified configurations will be cleared

after restoring to factory settings, so please backup

configuration file in advance.

Please refer to user manual for specific configuration

method of logging in to WEB interface and other

configurations about network management function.

【Specification】

Panel

Fast Ethernet port

10/100Base-T(X)

self-adaptation RJ45 port,

full duplex or half duplex

self-adaptation

RS-232 serial port

DB9 male

RS-485/422 serial port 5-pin 5.08mm pitch terminal

block

Indicator

Power indicator, Ethernet

port Link/Act indicator,

Serial port transmission and

receiving data indicator

Power supply

Input power supply

9~48VDC

Access terminal 3-pin 5.08mm pitch terminal

block

Consumption

No-load consumption

1.13W@9VDC

Full-load consumption 1.48W@9VDC

Working environment

Working temperature

-40℃～75℃

Storage temperature

-40℃～85℃

Working humidity

5%~95% (non-condensing)

Physical Characteristics

Protection grade

IP40 (mental shell)

Size (L×W×H)

100mm

69mm

22mm

Weight

240g

Mounting

Wall Mounting

Andere Handbücher für NP301

Andere 3One data Server Handbücher

3One data

3One data NP316Series Bedienungsanleitung

3One data

3One data NP5100 Series Bedienungsanleitung

3One data

3One data NP308T-8D Bedienungsanleitung

3One data

3One data NP Series Bedienungsanleitung

3One data

3One data NP318T-8DI Bedienungsanleitung

3One data

3One data ICP222-2F-2CI Bedienungs- und Wartungsanleitung

3One data

3One data NP5100 Series Bedienungsanleitung

3One data

3One data CP202-2CI Bedienungsanleitung

3One data

3One data NP301 Bedienungsanleitung

3One data

3One data NP3 T Series Bedienungs- und Wartungsanleitung

3One data

3One data NP318T-8DI Bedienungs- und Wartungsanleitung

3One data

3One data NP30XT series Bedienungsanleitung

3One data

3One data CP202-2CI Bedienungsanleitung

3One data

3One data NP5000 Series Bedienungsanleitung

3One data

3One data NP302T Series Bedienungsanleitung

3One data

3One data NP3116T Series Bedienungsanleitung

3One data

3One data NP316 Bedienungsanleitung

3One data

3One data NP302T Series Bedienungsanleitung

3One data

3One data NP318T-8DI Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung