Industrieweg 87
2651BC Berkel & Rodenrijs
4E-CMP installation and user guide
Page 3of 11
Thank you for choosing 4EVAC as your Voice Evacuation System solution.
4EVAC Compact 500 is an all-in-one Voice Evacuation System box. The box contains a completely
integrated Voice Evacuation System, capable of both standalone and network operation. 4EVAC Compact
500 is certified in accordance with EN54-16 and EN54-4, which are harmonized standards under the
Construction Products Regulation, mandatory in the European Union.
1. What is the 4E-CMP?
4E-CMP is a desktop or wall mounted microphone paging station with
pushbutton panel. It can address up to 6 zones for general purpose paging. 4E-
CMP includes a gooseneck microphone and dedicated TALK button, which can
operate in PTT or toggle mode.
4E-CMP is connected to the L-Net interface of the Compact 500 main unit and
may be daisy-chained with more L-Net devices. 4E-CMP is dedicated to general
purpose / commercial paging and does not offer fault monitoring or EVAC
functionality, thus is not suitable as an emergency microphone.
2. Where do I start?
First, make sure that you are officially allowed to access the hardware of Compact 500 system devices. This
is usually the case if:
you are an authorized representative of 4EVAC;
you have been trained by 4EVAC or one its authorized representatives for installation, service and
commissioning of the Compact 500 Voice Evacuation System.
Unauthorized hardware and/or software modifications are against the law and outside of the
manufacturer’s responsibility. If you have doubts about your status and access level permissions, please
contact the 4EVAC main office.
Important note: Access level 3 explanation
Opening the device housing or tampering with the network cabling is
restricted. This gives access to all interfaces, internal system
connections and sensitive hardware settings that are of high
importance to system operation mode, hardware reliability and safety
(Access Level 3 according to EN54-16, Annex A). This access level (and
higher) is strictly protected by the manufacturer and reserved only for
service personnel which is trained, approved and officially certified by
the manufacturer. Any actions carried out in Access Level 3 without the
manufacturer’s explicit approval may lead to incorrect settings or
hardware damage, causing serious system malfunction, and therefore
are strictly prohibited and void manufacturer’s warranty.
