5
Instructions for Use
Turning On/Off
Turning on: Connect the cigarette lighter plug to the car cigarette lighter socket and
turn on the car engine. The device will automatically turn on when it receives power
from the car, and the LED backlight is on.
Turning off: The device will automatically turn off when the cigarette lighter plug is
removed from the car cigarette lighter socket or when the engine is turned off, and the
LED backlight is off.
Pumping a jeep, SUV, sedan, motorcycle, or other kinds of tyres
As shown in the figure below, connect the gas tube to the tyre directly by screwing the
screw-on gas connector onto the tyre’s gas nozzle.
Turn on the device and place the on/off switch to “-“ position to start pumping. If the
pressure of the gas valve increases rapidly within a short interval (50 psi/345 kPa in 3
seconds), it means that the air way is obstructed. Please immediately turn off the power,
detach he screw-on gas connector from the tyre nozzle and reconnect the gas tube.
Next, observe the pressure gauge and when it reaches desired values, place the on/off
switch to “○” position to stop pumping. Finally, remove the cigarette lighter plug and the
device will automatically turn off.
Pumping an inflatable boat, inflatable toy, ball, or other kinds of
objects
With the standard long gas nozzle and ball needle, this device can inflate many of
refillable items. First, attach a suitable gas nozzle to the screw-on gas connector before
connecting it to an inflatable object. The long nozzle is suitable for beach balls, floats,
and other inflatable toys, as well as for dust removal and cleaning. The ball needle is
suitable for basketballs, footballs, volleyballs, and other kinds of balls.
