70mai RC06 Bedienungsanleitung
Rear Camera RC06
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –9
Čeština
10 –16
Slovenčina
17 –23
Magyar
24 –30
Deutsch
31 –37
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Please read this manual carefully before using the product and keep it in a safe place.
Product Overview
Note: Illustrations of the product, accessories, and user interface in the user manual are
for reference purposes only. The actual product and functions may vary due to product
enhancements.
Functions
The 70mai rear camera is used as an accessory for 70mai in-car products and needs to
be used with a main device.
After the rear camera is installed and connected with the main device correctly, when
rear camera recording is enabled, the rear camera can record and store the image from
the rear of the vehicle.
1
Rear camera
2
Mount
3
Rear camera lead wire
4
Joint (Port A)
5
Joint (Port B)
6
Rear signal wire
7
Mini USB 8pin power port
5
Usage
•The 70mai rear camera is powered by the main device. When the main device
starts operation, the rear camera will also be turned on automatically. When the
main device is turned off or sleeps, the rear camera will also be turned off
automatically.
•The main device powers the rear camera only when the main device receives
power from an external power source. The main device cannot power the rear
camera if it is not powered by the external power source.
•The image acquired by the rear camera is stored in the microSD card of the main
device automatically. As the storage limit is reached for the microSD card, the
earliest front-recorded and read-recorded images will be overwritten by the
latest images and deleted it turn cyclically.
Specifications
Product
Rear camera
Model
Midrive RC06
Resolution
1920×1080
Input
5V ⎓0.5A
6
Installation
1
Installing the electrostatic sticker.
Clean your rear windshield and put the
electrostatic sticker on the recommended
upper area of the windshield, as shown in the
figure below. Make sure you remove air
bubbles between the sticker and the glass.
2
Installing the rear camera.
Peel off the protective film from the adhesive
sticker on the base of the mount, and paste the
rear camera onto the electrostatic sticker in
the dotted area.
3
Connecting the power supply.
Connect the rear camera with the rear signal
wire (connect ports A and B together). As
shown in the figure on the left, run the wire
along the top of the rear windshield, C-pillar,
top of the side windows to the main device.
Plug the Mini USB 8pin power port into the
main device (the AV/IN port of the main
device).
4
Adjust the dash cam angle.
Turn on the main device and switch to rear
camera recording mode. Adjust the camera
angle based on the preview screen to ensure
that the camera is facing the back of the
vehicle.
Note: The installation and wiring methods for
different vehicles may differ from what
described in the user manual. The installation
shall be conducted by a professional installer.
7
Precautions
•Please employ a professional installed for the installation. The company shall not
be liable for improper personal operation that causes issues such as short circuit
of car power course, damage to the car battery, damage to the interior, and the
like.
•The company shall not be liable for damages due to installation, rather than
quality issue of the product itself.
•The company shall not be liable for failed normal use of this product that is not
resulted from quality issue of this product.
•During installation and use of the product, please do not insert or remove the
rear camera while the power is on, otherwise the product may be damaged.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
8
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Rear camera
Model / Type: Midrive RC06
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/30/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 1.10.2022
9
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.
10
Vážený zákazníku,
děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod k použití pro budoucí potřebu.
Zvláštní pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli
dotazy nebo připomínky, obraťte se na zákaznickou linku.
www.alza.cz/kontakt
✆+420 255 340 111
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Inhaltsverzeichnis
Sprachen:
