7bit Wicher CD32 Bedienungsanleitung
Wicher CD32
USER GUIDE
Version 1.0
Wicher CD32
2
Intended Use
Wicher CD32 has been designed for the Amiga CD32 line of computers and should be installed in
an expansion slot (e.g. CD32 Expansion Slot –sold separately) or any other expansion device
providing a similar functionality.
Set Contents
The complete set is composed of:
Wicher CD32 expansion card (in a protective packaging)
User manual.
First Steps
In order to ensure the correct operation of the Wicher CD32 card, the (sold separately) SIMM72
RAM module should be installed in the memory slot located on the card. Wicher CD32 is
compatible with SIMM72 FPM/EDO modules of 1MB to 128MB capacity and 50/60 ns access
time. This allows the Amiga CD32 computer to support up to 11MB FAST RAM. Wicher CD32 by
default provides up to 8MB of AmigaOS-addressable FAST RAM (depending on the capacity of the
installed SIMM72 module). To activate the additional 3 MB RAM, one should install WicherCD32
software package and physically enable 16 MB memory support via the X2 jumper settings.
Next, the 2,5” hard drive or the CF-IDE44 / SD-IDE44 adapter can be attached to the (44-pin) IDE
connector located on the card.
SIMM72 Memory Module Configuration - X2
Jumper
Position 0 –ON/OFF
Jumper installed –the card is active
Jumper removed –the card is inactive
Position 1 –RAS13 ON/OFF
Jumper installed –two-sided memory modules support
enabled
Jumper removed –two-sided memory modules support
disabled
Position 2 –8/16MB
Jumper installed –support for up to 8 MB
Jumper removed –support for up to 16 MB
Wicher CD32
3
Wicher CD32 Card Installation
All the activities related to the removal of computer’s case should be performed with the
Amiga being powered off.
Before the proper installation process begins, one should remove the cover case of the CD32’s
expansion slot.
Next, Wicher CD32 card should be installed into the CN1 port of the CD32 Expansion Slot.
The complete set: Wicher CD32 and the CD32 Expansion Slot should be carefully attached to the
original expansion socket of the computer.
Wicher CD32
4
Software Installation
Please visit our website (https://retro.7-bit.pl) to download the latest version of the
accompanying software and install it.
The installation package comes with a command line tool: WicherCD32. This program should be
inserted at the beginning of the S:startup-sequence file.
WicherCD32 syntax:
VERSION –displays program version
STATUS –displays status of the various Wicher CD32 settings
RAM –enables / disables additional RAM (restart required),
C0RAM –enables / disables $C00000-$D7FFFF memory addresses,
A0RAM –enables / disables $A00000-$B7FFFF memory addresses,
MAPROM –enables / disables FAST RAM Kickstart mapping (available only for 16MB+
configurations)
Additional news and information regarding the Wicher CD32 card and our other projects can be
found at our website: https://retro.7-bit.pl.
7-BIT Artur Gadawski
ul. Miłostowska 23/7
51-315 Wrocław
POLSKA / POLAND / EU
BDO: 000007249
http://retro.7-bit.pl
Inhaltsverzeichnis
Andere 7bit Lagerung Handbücher
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung