808 HEX SL Bedienungsanleitung
Q U I C K
S T A R T
G U I D E
Bluetooth wireless is a quick and easy way
to connect a smartphone to a speaker or a
headset. There are basically two steps to
making Bluetooth work.
PAIRING:
The two devices get to know each other.
CONNECTING:
The two devices do something together (like
play music).
“Hi. I’m a phone.”
This guide takes you through the steps to get
started.
Getting to know Bluetooth
“Hi phone.
I’m a speaker.”
1
Make sure the following items came in this
package.
Step 1: Unpack
Your speaker
USB
cable
Audio
cable
2
Speaker
back
Step 2: Charge the SL
Before you start using the HEX SL speaker
for the first time, it’s a good idea to charge it
completely.
To charge the speaker:
Plug the included USB
cable into the Charge
jack on the back of the
speaker.
Plug the other end of
the USB charging cable
into a power source, like
a computer or a USB
charging adapter.
The charging indicator on
the front of the speaker
is red while the speaker
is charging. It turns green
when the speaker is fully
charged.
Note: You can use the speaker
while it’s charging.
Speaker
front
3
Step 3: Turn on
Flip the OFF / ON
switch on the bottom
of the speaker to
the ON position. The
power up tone sounds
and the indicator
light on the front of
the speaker starts
blinking.
After a few seconds,
the speaker goes to
Bluetooth pairing
mode to set up with
your smartphone.
Speaker bottom
Speaker
front
4
Enable Bluetooth on
your smartphone or
other device.
Step 4: Pair + Connect
If you’ve previously paired your phone or other Bluetooth
device with this speaker, the speaker will automatically
attempt to reconnect to that device when you switch the
speaker on. If you want to pair to a new device, press and
hold the Pair button on the side of the speaker until the
speaker gives an audio signal.
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8:45PM
Make sure the
indicator light on the
front of the speaker is
blinking rapidly. (If it
isn’t, press and hold
the Pair button on the
side of the speaker
until the speaker gives
an audio signal.)
Speaker
front
5
Bluetooth Wireless Connection Tips
•MakesuretheBluetoothcapabilityofyourdeviceisturnedon.
•Makesurethere’snothingpluggedintothespeaker’sAUX
IN jack when you’re trying to use Bluetooth.
•TheBluetoothwirelessconnectionworksuptoarangeof
roughly 33 feet (10 meters). This range may vary, however,
based on other factors, such as room layout, wall material,
obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.
•Ifyourdeviceasksyouforapasswordtoconnect,use“0000”.
Choose 808 Hex SL from
the pairing options on
your smartphone. (If it’s
not in the list, choose
“Scan”fromyourphone’s
Bluetooth menu.)
Headset
808 Hex SL
Computer
8:45PM
Bluetooth devices
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The indicator light on the front of
the speaker turns solid blue.
Note: The process of enabling Bluetooth and connecting
varies from device to device. See your device’s owners manual
for more information and specific instructions.
6
To adjust the volume
of your audio: Use
the —and +buttons on
front of the speaker. You
can also use the volume
controls on your phone.
Set your device’s volume
for music to 75%.
Note: This is to make sure the
sound from the speaker isn’t too
loud when you start streaming.
Start playing music or
other audio on your
device. Within seconds,
the speaker starts
streaming the audio
wirelessly via Bluetooth.
Step 4: Play music
8:45PM
Now playing
Media volume
8:45PM
Note: If you notice sound distorting even at low volumes,
turn the volume down on your phone.
Speaker
front
7
Use the audio cable
included with this
speaker to connect
the audio output from
your device to the Aux
In audio input on the
speaker’s back panel.
Using the Aux In input
Speaker
back
The speaker automatically switches to the
Aux In audio, and the pairing indicator on the
front of the speaker turns white.
To listen to Bluetooth audio again, unplug
the cable from the speaker’s Aux In jack.
The speaker will try to reconnect to the last
Bluetooth device.
8
Tour of the speaker
Front of the speaker
Pairing indicator shows
the Bluetooth status of
the speaker:
•fastblinkingbluewhilepairing
•slowblinkingbluewhilereconnecting
•veryslowblinkingbluewhendisconnected
and in standby mode
•solidbluewhenpaired
•solidwhitewhentheAuxInjackisinuse
•owhenthespeaker’so.
Charging indicator shows the charging status
of the speaker:
•solidredwhilecharging
•solidgreenwhencharged
—and +adjust the volume of the speaker.
Pairing
indicator
Charging
indicator
Inhaltsverzeichnis
Andere 808 Sprecher Handbücher
808
808 XSSPORT Bedienungsanleitung
808
808 CANZ XLSP360 Bedienungsanleitung
808
808 HEXTL Bedienungsanleitung
808
808 Canz XL 2 Bedienungsanleitung
808
808 NRG GLO Bedienungsanleitung
808
808 SP260 Bedienungsanleitung
808
808 SP881 Betriebsanleitung
808
808 NRG SP250 Bedienungsanleitung
808
808 canz plus SP888 Bedienungsanleitung
808
808 canz plus SP888 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung