A-rival SpoQ HR Bedienungsanleitung

User Manual

Thank you for choosing an a-rival product. A good choice.

Just in case that you are facing any problems with your Device.

Please visit us at a-rival.de or contact our support:

- Mail: support@first-servicecenter.de

- Facebook:https://www.facebook.com/arivalpoweryourlife

- a-rival.de

You'll find Updates or actual information at our webpage:

www.a-rival.de

Introduction

Thank you for purchasing the GPS+ Bluetooth (BLE 4.0) Optic HRM watch. This product uses

an Electro-optical technology to sense the heart beat. It has an electro-optical sensor to

detect the volume of blood under your skin.

Know your Watch

Switching on and off your Watch:

This product has also a GPS function with the following main modes as you press S3:

TIME, RUN, HRM, CHRONO, TIMER, DATA, ALARM and SET.

Push button main function:

WARNING:

Consult your doctor before you begin a new exercise program. This is important for

persons with pre-existing health problems or persons who have taking medication

regularly.

This watch provides heart rate measurements. However, this is not a medical device.

This watch may affect pacemakers. If you have any concerns, consult your doctor

before using this watch.

Over exercising may result in serious injury or death. If you feel faint, if you become

short of breath, or if you experience pain while doing an exercise, stop immediately and

cool down.

To turn off the clock completely, pressed simultaneously S4 and S2 until the display turns off.

Press any button (approx. 3 seconds) to turn on the clock.

Wear the watch properly in your forearm:

Fasten the watch snugly so that the optical sensor makes a tight contact with your skin.

The tighter you can wear the watch the better.

Wear the watch not on your wrist bone but higher on your forearm.

If the Heart rate data displayed in the device is not stable or erratic, try to move the

device along your forearm within the best wearing position as illustrated.

Important note:

Before starting your exercise

You may need to tighten the strap.

-After sweating, you have to tighten the watch again for accurate measurement.

Make sure the heart rate reading is already stable.

Minimize excessive wrist movement while the HR is in use.

Caring for your Watch:

Clean your Watch with a dampened cloth preferably with mild detergent solution. Wipe dry

using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic

components.

Do not store your Watch to prolonged exposure to extreme temperatures as this may result to

permanent damage to your unit.

Charging the Battery:

It is recommended to fully charge the watch before first use and never to hit empty. Please

immediately charge when the battery level is at 20% to maximize the battery life and must be

charged once a month even if it is not used.

Plug your USB cable to your PC.

Align the charging clip with the contacts on the back of the Watch.

Connect the charging clip securely to the watch.

Note: Please thoroughly dry the charging contacts and surrounding area to ensure proper

electrical contact and prevent corrosion.

Battery low condition:

You cannot turn ON the GPS when the battery is low. You need to recharge the battery in

order to use the GPS again. The watch will display “BATTERY LOW”.

Water immersion:

This GPS Optic HRM watch, is designed to be water resistant up to 3 ATM.

After submersion to water, please make sure to wipe dry and air dry the unit before using or

charging.

Water damage may occur if the buttons are pressed underwater.

Language

This watch supports seven Languages including English, French, Spanish, Italian,

German, Dutch and Portuguese

English is the default language by default and after reset

You can change the language in the settings of the mobile phone APP

How to pair the watch with Smartphone:

1) Press and hold S4 while in Time mode. The “HOLD TO PAIR” appears followed by

pairing ID screen.

Notes:

If pairing is successful, the watch will display “PAIR OK”.

If pairing is not successful, the watch will display “PAIR FAIL” after 1 minute.

In any TIME screen, press and hold S4 button to turn off the Bluetooth.

2) Open the App on your Smartph one to pair.

3) Tap “LINK DEVICE”.

4) Select Bluetooth ID (ex. SpoQ HR 8632 ) and tap “Done”.

5) Tap “Pair”.

6) Fill-in the User Name. Then tap “NEXT”. The APP will then display the SETTINGS

screen. Inthis setting screen you can set your UNIT, USER details, SLEEP mode,

GOALS, HEART RATE, Phone Alerts, and Display FORMAT of the watch, Hourly

CHIME, AUTO LAP, LANGUAGE, and Devise Orientation. Scroll down to see also

the parameters to set. Tap the Sync icon after you finished setting to syncthe APP

with the watch.

NOTE: When you tap the SYNC icon,the APP will start the SYNC operation and

all the settings in the APP will be in sync with the watch including the time.

Likewise, the data in the watch will be in sync with the APP.

SYNC icon

7) Tap the MENU icon on the upper right side of the Setting MENU screen

Tap HOMEto go tothe HOME screen.

8) The HOME screen has the SYNC icon on the top left portion. It also has the

MENU icon on the TOP right portion.

9) On the bottom of the Home screen, you have 4 TABS, namely ACTIVITY,

WORKOUT, SLEEP, and HEART RATE. You can tap on any of these tabsto go

directly tothat screen.

SYNC icon MENU icon

10) The ACTIVITY screen displays your STEPS, DISTANCE, EXERCISE TIME, and

CALORIES burned. At the bottom of the screen, it displays your SLEEP data.

11) The WORKOUT Screen. Scroll down to view more information. You can START or

STOP your workout by simply tapping on the START / STOP tab. After Stopping, you

can tap SAVE and the APP will auto SYNC with the watch.

12) The SLEEP screen. This screen will display your SLEEP data.

Inhaltsverzeichnis

Andere A-rival Betrachten Handbücher

A-rival

A-rival SQ-100 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung