A4Tech XG-760 Bedienungsanleitung

X7 Oscar Wireless Gaming Mouse

Model: XG-760

www.a4tech.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

Federal Communications Commission Requirements

The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction, may cause harmful interference to radio communication. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

●Reorient of relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR

COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and receiver.

(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC

radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The equipment has very low levels of RF

energy that it is deemed to comply without testing of specific absorption ratio (SAR).

Mouse Button Diagram

Hardware Installation

Software Installation

X7 Oscar mouse editor offers 2 flexible ways to install the driver, Normal Installation and Mobile Execution. X7 Oscar mouse editor main program has a

special feature that it can be executed directly without the need to install the software to Windows system. This is convenient when you are using a public

computer and installing mouse driver to the system is prohibited or restricted. In such circumstances, you do not need to install the mouse driver, but just

run the X7 Oscar’s main program directly from your storage device, e.g., a memory stick.

Normal Installation

1). Uninstall any mouse software on your system.

2). Insert enclosed CD to start installation and follow the on-screen instructions to finish the software installation. You may

manually double click the “auto-run” program if execution does not automatically start.

3). The shortcut icon " " will appear on your desktop screen, and then you have successfully installed the software.

(Otherwise, installation is failed and you have to remove the software and re-install.)

To remove the software, follow the below steps:

Go to START>> PROGRAMS >>A4TECH Software >> "X7 Oscar Mouse Editor" >> "Uninstall X7 Oscar Mouse Editor",

see figure on the right.

1). Connect the Multi-link receiver

Take out the Multi-link receiver from bottom of the mouse and connect it to your computer or Notebook.

2). Insert the batteries

Push down the mouse cover to open the battery cover and insert the supplied batteries. Please make sure the positive

(+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment.

3). Turn on your Mouse

Push the power switch to ON position and turn on your mouse. >>Then LED light at the bottom of the mouse is on

immediately.

X7 Oscar Mouse Editor

Main Menu of XG Oscar

Mouse Button Definition:

Display current mouse button settings or

setup new settings to mouse buttons.

Save new settings to receiver and

apply the new settings immediately.

Description of Reminder:

Enter short description here for each

button setting, which will be displayed

later as the reminder on the screen.

Mode Number:

Select a mode number to edit.

Mode Name/Select:

Name a new mode or select

modes to use.

Button Settings and Relevant Functions

Click any “button definition area” on the main menu; you will see the function listing as shown below.According to your

preference, you may select one of them as the button setting. You also can enter a short description on the “Description of

reminder” area, which will be displayed on the screen when it is activated as the reminder.

No Settings

There is no button setting being defined.

Keyboard...

You may setup the mouse button to simulate a keyboard's keystroke, or a key combination with "Win", "Ctrl", "Shift" and "Alt", then followed with any

keystroke on the keyboard, and then assign it to the designated mouse button.

Mouse

Except mouse left button, you may setup any of mouse buttons to be one of "mouse left button, mouse right button, mouse middle button, mouse 4

button, mouse 5

button, wheel up and wheel down".

Open a file

One click to open a program file or a document. You may setup any of mouse buttons of 2, 3, 4, 5, 6, wheel up(UP) and wheel down(DN) with "Open a

File" function.

Usage:

1). Select "Open a file" from the pull-down button menu as figureAshows.

2). A screen of file listings will pop up as figure B shows.

3) Select one of the files that you would open it with the associated button and click "Open".

4) Now you can see the file you selected has been assigned to the button.

5) Click "Apply" to save the new button setting.

Example:

While in the session of a meeting or teaching, it is embarrassing to keep others waiting due to searching for a document, or

look up for a program or a shortcut. With "Open a File" function, you may have better way to resolve this issue. By setting

up each button in association to the document, program or shortcut, all you need to do is to shift to the mode and click each

mouse button to open all the files instantly. You may also open an on-line reminder to check each mouse button

association details.

Figure A

Figure B

Memo

See below "Memo" section in more details.

One click to open the Memo screen and list out all the current button settings as the reminder. You may setup any of mouse buttons of 2, 3, 4, 5, 6, wheel

up(UP) and wheel down(DN) with "Memo" function.

Usage:

1). Select "Memo" from the pull-down button menu as figure C shows.

2). Click "Apply" to save button setting.

Figure C

Example:

This function is useful during the session of a meeting or teaching, when you are not very sure which button is associated

with the function you need.

Click the "Memo" button will bring the "Memo" screen as figure D shows. Now you can check each button setting and

activate them immediately.

For instance, the teacher can open all the handout documents in seconds by clicking the button in association with the

mouse buttons.

The Memo function is available for mouse button 2, 3, 4, 5, 6, Wheel up(UP) and Wheel down (DN).

Figure D

Office Sets

You may setup any one of Office command sets such as: "Zoom In, Zoom Out, Paste Text, Double Click and Treble Click" to the mouse buttons.

Zoom In/Out: One click to perform zoom in or zoom out function, applicable to CAD, ACDSee, Windows or text editing programs.

Paste Text: One click to perform "Select, Copy & Paste" texts, it turns office jobs can never be so simple.

Key Combination

Quick access to Office commands of key combinations, such as: Cut, Copy, Paste, Delete, Search, Select All, Redo, Undo, New File, Open File, Save

File, Print...etc.

Multimedia

Quick access to Multimedia commands, such as: Media Player (Open), Previous, Next, Stop, Play/Pause, Mute, Volume+, Volume-...etc.

Internet

Quick access to usually used Internet commands, such as: Backward, Forward, Stop, Refresh, Search, My Favorite, Web Browser, E-mail...etc.

System

Quick access to Windows commands, such as: Open Calculator, Open My Computer, Sleep, Power Off...etc.

Gesture 16-in-1

This 16-in-1 mouse utility offers 16 directions to draw the lines with the mouse and the preset commands will be executed immediately. Note that

this gesture function is only available for mouse button and . See more details on the Gesture 16-in-1 section.

Screen Shot

Button / / can be set as "Screen Shot". One click to take a screenshot of a chosen area of the screen or video and quickly share with others.

Screenshot Usage

Configure your screenshot button:

1. Open the Main Menu and choose any of mouse buttons , or as “Screen Shot” function.

2. Select “Screen Shot” from the pull-down button menu(Shown as right).

3. Click "Apply" to save the setting

Take a screenshot

Press the screenshot button and move the mouse to choose the area you want to capture (A dashed pane will show up), then release the button to

take a screenshot.

Paste

Press "Ctrl + V" on the keyboard to paste your screenshot in any of your applications!

Edit/Save

Save or edit the captured image in paint software

Screen Shot – Ideal for office and internet uses

One click to take a screenshot of a chosen area of the screen or video and quickly share with others.

Select Macro File

There are many useful macro functions you may choose from, including commands for PowerPoint(PPT) / Media Center Edition(MCE) /

Gaming(CS) ...etc. They are backward compatible with X7 Oscar file format, and can be downloaded from the website: http://www.x7.cn.

DPI Setting

Customizable and independent 3,200 DPI resolution for each X and Y axes.

XG Oscar offers customizable and independent resolution for each X and Y axes that best suits various LCD

resolutions, in particular, it is crucial for some game plays.

DPI Levels & Color Indicator

DPI Levels (Default) Indicator Color

Suitable Resolution of display

（

（（

（Recommended）

））

）Recommended for:

DPI 1: 400DPI No light 800×600 Slow-Speed and normal accuracy player

DPI 2: 800DPI Green 1024×768 Medium-Speed and average accuracy required player

DPI 3: 1,200DPI

Yellow 1152×864 Fast-Speed and above average accuracy required player

DPI 4: 1,600DPI

Red 1280×960 High-Speed and pinpoint accuracy required player

DPI 5: 2,000DPI

Red & Yellow 1280×1024 Extra High-Speed and pinpoint accuracy required player

DPI 6: 3,600DPI

Yellow& Green

1280×1024 Extra High-Speed and pinpoint accuracy required player

Report Rate

Mouse Report Rate is the term that how many times the mouse sends data to the computer in one second. For instance, "Report Rate 500Hz" means

"the mouse sends 500 times of data to the computer in one second". X7 Oscar offers 3 report rates, e.g., 125Hz, 250Hz and 500Hz respectively. The

higher times stands for the smoother the cursor movement and precise click response, especially suitable for game play, which requires high speed and

quick response. (For a conventional mouse, the report rate is 125Hz). For the 5 working modes, the report rates are preset according to various

applications, as shown below:

According to various applications, the bandwidth is divided into 3 report rate levels:

1X Speed: USB report rate is 125Hz, suitable for office and general users, power consumption is the lowest.

2X Speed: USB report rate is 250Hz, suitable for CAD users, power consumption is normal.

4X Speed: USB report rate is 500Hz, suitable for heavy-duty game players, power consumption is high.

Gesture 16-in-1

On the button definition area of Main menu, click “ ” of button or , you will see the “Gesture 16-in-1” on the function

listing as shown on the right.

The “Gesture 16-in-1” offers customizable 16 functions in 1 click with gesture button. You may setup 16 most-frequently-used commands to the Gesture

buttons or from 6 categories, more than 30 commands, including Keyboard, Mouse, Hyperlink, Office, Text, Multimedia, Internet and Key Setting

Reminder. Using the mouse to draw the lines as any of 16 preset directions, the corresponding command will be executed immediately. It adds powerful

and handy tools in Windows operation, and increases your working efficiency dramatically.

Usage

Press and hold the gesture button to draw any of 16 lines and directions as shown on the right, then release the button.

The corresponding commands will be executed immediately, including Keyboard, Mouse, Hyperlink, Office, Text,

Multimedia, Internet and Key Setting Reminder, which can be preset and store to your receiver memory.

Diagrams of 16 mouse

gestures

Example 1:

Using as “Zoom In” command by default, when you are viewing a picture withACDSee, or browsing a PPT file in the Office, or Reading a PDF

file…etc, just pressing the “Gesture Button” and draw the line as shown below, then release the button, the picture or the document will be zoomed in

immediately.

a. Start: Press the "Gesture Button"

b. Track of the drawing line: Draw the line as the arrow direction

c. End: Release "Gesture Button"

Then the picture has been zoomed in.

Example 2

See the contrast in EXCEL after drawing the line.

Now let's take " " as example to show you how to use these functions：

1. Select " " icon to represent "Zoom In" as shown:

2. Click " " to close the setup screen.

3. Click “ ” to save to receiver’s memory.

4. Draw the line in Excel.

Original After drawing the line, the column has been enlarged

Draw the line in Windows Picture and Fax Viewer

Original After drawing the line, the column has been enlarged

Task Listing of X7 Oscar Mouse Editor

There are 2 ways will display the working mode number when it is shifted:

Display 1: When the mode is shifted, the memo screen will be displayed on the screen center to remind current

mode number information as shown on the right.

Display 2: Meanwhile, the small icon on the system tray will shift with mode numbers . For

example, implies current working mode is in “Mode 1, Office” as shown on the right.

Left or Right click on the icon " " at your system tray, you will see “X7 Oscar Task Listing” pops up as shown on the right.

Following will brief each task and its functionality.

Inhaltsverzeichnis

Andere A4Tech Kabellose Maus Handbücher

A4Tech

A4Tech G7-600DX Bedienungsanleitung

Beliebte Kabellose Maus Handbücher anderer Marken

Logitech

Logitech B330 Bedienungsanleitung

Dexin

Dexin MW1053 Bedienungsanleitung

Xcellon

Xcellon MSW-L15BM Bedienungsanleitung