Aaeon AEC-6950 Bedienungsanleitung

Embedded Controller

A E C - 6950

AEC-6950

Fanless Embedded Controller

Intel®Core™i7-3517UE 1.7GHz

Processor

2 PCI or PCI-E[x1]/ PCI-E[x16]

2 GbE/ 8 COMs/

4 USB2.0, 2 USB3.0

Mini PCIe x 2

AEC-6950 Manual 3rd Ed.

April 2, 2018

Embedded Controller

A E C - 6950

This document is copyrighted, 2018. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, or for any in-

fringements upon the rights of third parties that may result from its

use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have been

made in the preparation of this document to assure its accuracy,

AAEON assumes no liabilities resulting from errors or omissions in

this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Embedded Controller

A E C - 6950

Acknowledgments

AMI is a trademark of American Megatrends Inc.

CFast™is a trademark of the Compact Flash Association.

Intel®, Core™are trademarkes of Intel®Corporation.

Microsoft Windows®is a registered trademark of Microsoft

Corp.

PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

All other product names or trademarks are properties of their

respective owners.

Embedded Controller

A E C - 6950

iii

Packing List

Before you begin operating your PC, please make sure that the

following materials have been shipped:

1 AEC-6950 Embedded Controller

1 Phoenix Power Connector

4 M3 x 4mm Screws

6 M4 x 8mm Screws

2 Wallmount Brackets

1 DVD-ROM for Drivers

If any of these items should be missing or damaged, please contact

your distributor or sales representative immediately.

Embedded Controller

A E C - 6950

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a firm surface during installation. Dropping

it or letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

14. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

Embedded Controller

A E C - 6950

d. The equipment does not work well, or you cannot get it

to work according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE IS BELOW -20°C

(-4°F) OR ABOVE 70°C (158°F). IT MAY DAMAGE THE

EQUIPMENT.

FCC

This device complies with Part 15 FCC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received including

interference that may cause undesired

operation.

Caution:

There is a danger of explosion if the battery is incorrectly

replaced. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local

government’s recycling or disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le

constructeur. Recycler les batteries usées en accord avec les instructions du

fabricant et les directives gouvernementales de recyclage.

Embedded Controller

A E C - 6950

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Boxer/ Industrial System

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯

醚(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

外壳

○

中央处理器

与内存

○

硬盘

○

电源

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Embedded Controller

A E C - 6950

vii

Contents

Chapter 1 General Information

1.1 Introduction................................................................ 1-2

1.2 Features .................................................................... 1-3

1.3 Specifications ............................................................ 1-4

Chapter 2 Hardware Installation

2.1 Jumpers and Connectors of Main Board................... 2-2

2.2 Dimension ................................................................. 2-3

2.3 List of Jumpers..........................................................2-4

2.4 List of Connectors ..................................................... 2-4

2.5 Setting Jumpers ........................................................ 2-6

2.6 Isolation COM1, COM2 RS232/RS485/RS422 selection

(JP3, JP4)........................................................................2-7

2.7 LVDS Port Backlight Lightness Control Mode Selection

(JP5)................................................................................2-7

2.8 Inverter Power Selection (JP8) .................................2-7

2.9 LCD Voltage Selection (JP9) .................................... 2-7

2.10 COM3 +12V/+5V/Ring Selection (JP11).................2-7

2.11 COM4 +12V/+5V/Ring Selection (JP12).................2-8

2.12 Clear CMOS (JP13) ................................................ 2-8

2.13 Auto Power Button (J1)...........................................2-8

2.14 SATA Power (CN10~CN11).................................... 2-8

2.15 1000Base-T Ethernet Connector with Dock USB 2.0

Connector (CN12) ........................................................... 2-8

Embedded Controller

A E C - 6950

viii

2.16 1000Base-T Ethernet Connector with Dock USB 3.0

Connector (CN13) ........................................................... 2-9

2.17 LVDS Connector (CN17).........................................2-10

2.18 RS-232/422/485 Pin DEFINE (COM1)(CN19)........2-11

2.19 RS-232 Header (COM3)(CN20).............................. 2-12

2.20 RS-232 Header (COM4) (CN21)............................. 2-12

2.21 RS-232 Header (COM6)(CN22).............................. 2-12

2.22 RS-232 Header (COM5)(CN23).............................. 2-12

2.23 RS-232/422/485 Pin DEFINE (COM7)(CN24)........2-13

2.24 RS-232/422/485 Pin DEFINE (COM8)(CN25)........2-13

2.25 RS-232/422/485 Pin DEFINE (COM2)(CN26)........2-14

2.26 ISO DIO(CN29) .......................................................2-15

2.27 LVDS Inverter/ Backlight Connector (CN32)...........2-15

2.28 Front Panel Connector (CN38) ............................... 2-16

2.29 Hard Disk Drive Installation.....................................2-16

2.30 PCI Card Installation ............................................... 2-17

2.31 Wallmount kit Installation ........................................ 2-22

Chapter 3 AMI BIOS Setup

3.1 System Test and Initialization. .................................. 3-2

3.2 AMI BIOS Setup........................................................ 3-3

Chapter 4 Driver Installation

4.1 Installation .................................................................4-3

Appendix A Programming The Watchdog Timer

A.1 Watchdog Timer Initial Program ............................A-2

Embedded Controller

A E C - 6950

Appendix B I/O Information

B.1 I/O Address Map ..................................................B-2

B.2 Memory Address Map ..........................................B-4

B.3 IRQ Mapping Chart ..............................................B-5

B.4 DMA Channel Assignments .................................B-7

Appendix C RAID & AHCI Settings

C.1 Setting RAID......................................................... C-2

C.2 Setting AHCI....................................................... C-12

Appendix D Electrical Specifications for I/O Ports

D.1 DIO Programming................................................. D-2

D.2 Digital I/O Register................................................ D-3

D.3 Digital I/O Sample Program.................................. D-4

Inhaltsverzeichnis

Andere Aaeon Controller Handbücher

Aaeon

Aaeon AEC-6612 Bedienungsanleitung

Aaeon

Aaeon BOXER-6614 Bedienungsanleitung

Aaeon

Aaeon AEC-6420 Bedienungsanleitung

Aaeon

Aaeon AEC-6920 Bedienungsanleitung

Aaeon

Aaeon AEC-6877 Bedienungsanleitung

Aaeon

Aaeon AVR-3000 Bedienungsanleitung

Aaeon

Aaeon AEC-6850 Bedienungsanleitung

Aaeon

Aaeon AEC-6840 Bedienungsanleitung

Aaeon

Aaeon TKS-G20-LN05 Bedienungsanleitung

Aaeon

Aaeon AEC-6915 Bedienungsanleitung

Aaeon

Aaeon AEC-6811A Bedienungsanleitung

Aaeon

Aaeon AEC-6638 Bedienungsanleitung

Aaeon

Aaeon AEC-6930 Bedienungsanleitung

Aaeon

Aaeon AEC-6625 Bedienungsanleitung

Aaeon

Aaeon BOXER-RK99 Bedienungsanleitung

Aaeon

Aaeon AEC-6841 Bedienungsanleitung

Aaeon

Aaeon AEC-6910 Bedienungsanleitung

Aaeon

Aaeon AEC-6402 Bedienungsanleitung

Aaeon

Aaeon HSB-800I-A11 Bedienungsanleitung

Aaeon

Aaeon AEC-6876 Bedienungsanleitung

Aaeon

Aaeon AEC-VS01 Bedienungsanleitung

Aaeon

Aaeon AEC-6872 Bedienungsanleitung

Aaeon

Aaeon AEC-6940 Bedienungsanleitung

Aaeon

Aaeon AEC-6911 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung