Aaeon SBC-357 Bedienungsanleitung
SBC-357
Half-size All-in-one 386SX-40 CPU card
FCC STATEMENT
THIS DEVICE COMPLIES WITH PART 15 FCC RULES.
OPERATIONISSUBJECTTOTHEFOLLOWINGTWO
CONDITIONS:(1)THISDEVICEMAY NOT CAUSE HARM-
FULINTERFERENCE.(2)THISDEVICEMUSTACCEPT
ANYINTERFERENCERECEIVEDINCLUDINGINTERFER-
ENCETHATMAYCAUSEUNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASON-
ABLE PROTECTION AGAINTST HARMFUL INTERFER-
ENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FRE-
QUENCY ENERGY AND , IF NOT INSTATLLED AND USED
IN ACCORDANCEWITH THE INSTRUCTION MANUAL,
MAY CAUSEHARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS.OPERATION OF THIS EQUIPMENT
IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARM-
FUL INTERFERENCE IN WHICH CASE THE USER
WILL BE REQUIRED TO CORRECT THE INTERFER-
ENCE AT HIS OWN EXPENSE.
Copyright Notice
This document is copyrighted, 1998, by AAEON Technology Inc.
All rights are reserved. AAEON Technology Inc. reserves the
right to make improvements to the products described in this
manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of AAEON Technology Inc. Information provided in
this manual is intended to be accurate and reliable. However,
AAEON Technology Inc. assumes no responsibility for its use,
nor for any infringements upon the rights of third parties which
may result from its use.
Acknowledgements
ALI is a trademark of Acer Laboratories, Inc.
AMD is a trademark of Advanced Micro Devices, Inc.
AMI is a trademark of American Megatrends, Inc.
AutoCAD and AutoShade are trademarks of Autodesk, Inc.
CHIPS Logotype is a registered trademark; Chips 65550 is a
trademark of Chip and Technologies, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
Lotus, 1-2-3, and Symphony are trademarks of Lotus Develop-
ment Corp.
Microsoft Windows®and MS-DOS are registered trademarks of
Microsoft Corp.
SMC is a trademark of Standard Microsystems Corporation.
TurboDLD Classic is a trademark of Panacea Inc.
UMC is a trademark of United Microelectronics Corporation.
WordPerfect is a trademark of WordPerfect Corporation.
VESA®is a registered trademark of Video Electronics Standards
Association.
All other product names or trademarks are properties of their
respective owners.
PartNo.200735701 SBC-357 A1.21st Edition
Printed in Taiwan March. 1999
Packing list
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 supporting CD-ROM
• 1 SBC-357 CPUcard
• 1 Hard diskdrive(IDE)interface cable (40 pin)
• 1 Floppy disk drive interface cable (34 pin)
• 1 6-pin mini-DIN dual outlet adapter for keyboard and PS/2
mouse
• 1 parallel port adapter (26-25 pin) and dual outlet adapter kit
for COM port (10-9 pin) & (14-9 pin) adapter kit
• 2 serial adapter kit (9-10 Pin)
• 1 bag of screws and miscellaneous parts
If any of these items are missing or damaged, contact your distribu-
tor or sales representative immediately.
Notice
Dear Customer,
Thank you for purchasing the SBC-357 board. The user manual is
designed to help you to get the most out of the SBC-357, please
read it thoroughly before you install and use the board. This
product that you have purchased comes with a one-year limited
warranty; AAEON will not be responsible for any misuse of the
product. Therefore, we strongly urge that user first read the
manual before using the product.
To receive the lastest version of the user manual, please visit our
Web site at: Taiwan: www.aaeon.com.tw
U.S.A : www.aaeon.com
Contents
1 General Information ........................... 1
Introduction ............................................................................ 2
Features ................................................................................... 3
Specifications .......................................................................... 3
Board layout ........................................................................... 5
Carddimensions ..................................................................... 6
2 Installation ........................................... 7
Jumpersandconnectors ........................................................ 8
Locating jumpers and connectors......................................... 9
Setting jumpers ..................................................................... 10
Safetyprecautions .................................................................11
Installing DRAM(SIMMs) .................................................. 12
InstallingSIMMs .................................................................... 12
RemovingSIMMs................................................................... 12
IDEharddriveconnector(CN1) ......................................... 13
Floppy drive connector (CN2) ............................................. 15
Connecting thefloppy drive .................................................... 15
Parallel(printer)connector (CN3) ...................................... 16
Installingthe retainingbracket................................................. 16
Display connectors (CN10, CN4) ........................................ 17
Reserved IR connector (CN5).............................................. 19
Powerconnector(CN6)........................................................ 19
Serial port connectors (CN7, CN8, CN9, CN11)................ 20
KB and PS/2 mouse connector (CN12, CN14)................... 22
Keyboard lock function (CN13).......................................... 23
IDELED(JP1)...................................................................... 24
RS-232/422/485settingselect(JP2)..................................... 24
Buzzerorexternalspeaker (JP3)......................................... 25
LCD SHF/ASHF clock select (JP4)................................. 25
System management Interrupt (JP5) ............................... 26
Hardware Reset (JP6)........................................................ 26
COM3/COM4 IRQ select (JP7)...................................... 27
DiskOnChip installation (U15, JP8)................................. 27
LCD driving voltage select (JP9, JP10) ......................... 29
DiskOnChip socket (U15)................................................. 30
3 AMIBIOS Setup ................................... 31
General information ............................................................ 32
Starting AMIBIOS setup ........................................................32
AMIBIOS main menu.............................................................32
Using a mouse with AMIBIOS setup .....................................33
Using the keyboard with AMIBIOS setup..............................33
Standard CMOS setup ....................................................... 34
Advanced CMOS setup ..................................................... 36
Advanced chipset setup ..................................................... 42
Power management setup.................................................. 45
Peripheral Setup.................................................................. 48
Change supervisor password ............................................ 50
Auto configuration with optimal settings......................... 51
Auto configuration with fail safe settings ........................ 52
Save settings and exit......................................................... 53
Exit without saving ............................................................. 54
4 SVGA Setup ........................................ 55
Windows 3.1......................................................................... 56
Driver installation - Windows Setup ........................................56
DOS ....................................................................................... 57
SOFTWARE UTILITIES................................................... 59
The CHIPSCPL utility program..............................................59
Installing theutility ...................................................................59
How to use the utility ..............................................................59
A Watchdog Timer Demo Program . 61
Watchdog timer Demo Program ....................................... 62
B Installing PC/104 Modules ............... 67
Installing PC/104 modules................................................. 68
Chapter 1 General Information 1
CHAPTER
1
GeneraI
Information
This chapter provides background
information for the SBC-357.
Sections include:
· Card specifications
·Board layout
2SBC-357 User Manual
Introduction
The SBC-357 is an all-in-one single board 386 computer with an
onboard flat panel/CRT SVGA controller. It packs all the
functions of an industrial computer and its display capabilities
onto a single, half-size card. This means the SBC-357 is your
absolute best solution for embedded applications.
The onboard ISA-Bus, flat panel/CRT SVGA controller uses the
CHIPS 65545 chipset with up to 1 MB of video memory (512KB
onboard). It supports various LCD types including TFT, STN,
Normal, and EL.
The SBC-357 supports the optional M-Systems DiskOnChip
2000 which is a new generation of high performance single-chip
Flash Disk. It provides a Flash Disk (as a BIOS expansion) which
doesn't require any bus, slots, or connectors. It is also the optimal
solution for Single Board Computers because of its small size,
easy integration, plug-and-play functionality, and its low power
consumption. The DiskOnChip is available in capacities from
2MB to 72MB and fits in a standard 32-pin DIP socket.
The SBC-357 also features three high speed RS-232 serial ports,
and one RS-232/422/485 serial port with 16C550 UARTs, one
bidirectional SPP/EPP/ECP parallel port, and a floppy drive
controller, all onboard.
If program execution is halted by a program bug or EMI, the
board's watchdog timer can automatically reset the CPU or
generate an interrupt. This ensures reliability in unmanned or
standalone systems.
All configuration is done through software. A single Flash chip
holds the system BIOS, VGA BIOS, and the network boot ROM
image. This minimizes the number of chips and eases configura-
tion. You can change the display BIOS or install a boot ROM
simply by programming the Flash chip.
The SBC-357 supports 5 V EDO or FP DRAM. It also provides
two 72-pin SIMM (Single In-line Memory Module) sockets for
its onboard system DRAM. These sockets give you the flexibility
to configure your system up to 32 MB of DRAM using the most
economical combination of SIMMs.
Inhaltsverzeichnis
Andere Aaeon Hauptplatine Handbücher
Aaeon
Aaeon PCM-6890B Bedienungsanleitung
Aaeon
Aaeon PCM-5894 Bedienungsanleitung
Aaeon
Aaeon MIX-H310D2 Bedienungsanleitung
Aaeon
Aaeon SBC-780 Bedienungsanleitung
Aaeon
Aaeon PCM-6890 Bedienungsanleitung
Aaeon
Aaeon MB-562 Bedienungsanleitung
Aaeon
Aaeon EMB-900M Bedienungsanleitung
Aaeon
Aaeon PCM-6890B Bedienungsanleitung
Aaeon
Aaeon SBC-659P Bedienungsanleitung
Aaeon
Aaeon PCM-5895 Bedienungsanleitung
Aaeon
Aaeon MB-668 Bedienungsanleitung
Aaeon
Aaeon EMB-A70M Bedienungsanleitung
Aaeon
Aaeon EPIC-9457 Bedienungsanleitung
Aaeon
Aaeon ECM-5716 Series Bedienungsanleitung
Aaeon
Aaeon EMB-B75B Bedienungsanleitung
Aaeon
Aaeon EMB-852T Bedienungsanleitung
Aaeon
Aaeon GENE-WHU6 Bedienungsanleitung
Aaeon
Aaeon EMB-BSW1 Bedienungsanleitung
Aaeon
Aaeon IMBA-H110A Bedienungsanleitung
Aaeon
Aaeon SBC-770 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
