A&D UC-321 Bedienungsanleitung
1WMPD4000285B
Precision Health Scale
Model UC-321
Before Use
Precautions ................................... 1
Scale Components ........................ 2
Display Symbols ............................ 3
Installing (or Replacing) Batteries .. 3
Operations
Basic Measurement ....................... 4
Memory Function ........................... 6
Target Function .............................. 8
BMI Indication .............................. 10
Measuring Your Weight on a Carpet . 12
References
Specifications ............................... 13
Maintaining the Scale ................... 13
Before Requesting Service ........... 13
Precautions
Please read this booklet before using your scale.
Place your scale on a solid level surface, such as tile, wood, or
laminate flooring.
Do not place your scale on a soft, wet or slippery floor. If the scale
must be used on a carpet, be sure to attach the plastic add-on feet as
shown on page 12.
Your scale contains delicate, high-precision parts. Avoid extremes in
temperature, humidity, direct sunlight, shock, moisture and dust.
Do not step on your scale with your feet wet. Be sure that your feet
are dry to prevent slipping and serious injury.
Step on the center portion of your scale gently.
Do not step on the display window.
Do not open the case of the scale.
Holding the measurement switch for extended periods will shorten battery life.
Indications for Use
The UC-321 is designed for adult use at home.
Compliance with European Directive
The scale complies with the statutory EMC (Electromagnetic Compatibility) directive 2004/
108/EC. Note: The displayed value may be adversely affected under extreme
electromagnetic influences.
Scale Components
Display
OK Mark
Low Battery Mark
Front
Measurement Switch
Back
Slide Switch
Battery Compartment
The following four measurements can be selected by the slide switch.
Refer to
“Basic Measurement” and “Measuring a Baby or an Animal”
.
WEIGHT
The function to measure your weight, the weight of a baby or
animal.
BMI Refer to “BMI Indication”.
The BMI is a helpful indicator of body weight condition, in adults.
Refer to “Memory Function”.
MEMORY
Up to 31 weight data can be stored in memory.
The difference from the previous result is displayed automatically.
Refer to “Target Function”.
TARGET
The difference between the preset target weight and the current
weight can be displayed.
The scale has an “automatic-power-off” function to turn the scale off after ten
seconds of non-operation. Therefore, the scale has no off switch.
Function Indicators
- 2 -
Function
Display Symbols
OK mark. This mark is displayed when measurement display is stable.
Low battery mark. If this mark is displayed, replace all four batteries
with new ones.
, Function indicators. The current function is indicated.
Installing (or Replacing) Batteries
Caution
Insert each battery with its positive (+) and negative (-) terminals properly
aligned with the corresponding marks in the battery compartment.
Improper installation of the batteries may cause battery leakage.
Replace all four batteries with new ones, when the mark is displayed.
Do not mix new and used batteries. It may cause damage to the scale or
shorten battery life.
When batteries are completely drained, the mark is not displayed.
The battery life is dependant upon the environmental temperature, battery type
and usage.
Remove the batteries from the battery compartment, when the scale is not to
be used for a long time. They may leak and damage your scale.
The accessory batteries may have a shorter life than new ones.
Steps for Installing (or Replacing) Batteries
1Remove the battery compartment cover on the
underside of the scale by gently pushing on
the arrow and lifting the cover backward.
2Install four new batteries with the positive (+)
and negative (-) terminals properly aligned with
the corresponding marks in the battery com-
partment.
3Replace the cover by sliding it into the com-
partment and gently pressing into place.
- 3 -
Basic Measurement
Measuring Your Weight
1Set the slide switch to “WEIGHT”.
2Press the measurement switch gently.
All display segments are indicated for several
seconds. Then, 0.00 kg and the mark are dis-
played.
3Step on your scale.
Step on your scale gently. When the mark
disappears, the measurement is started. Remain
still during the measurement.
If 0.00 kg is displayed for approximately ten sec-
onds, the scale is automatically turned off.
4Your weight can be read after the
mark is displayed.
The scale is turned off automatically after ap-
proximately five seconds.
5Step off the scale.
Slide switch Measurement switch
- 4 -
Measuring a Baby or an Animal
1Set the slide switch to “WEIGHT”.
2Press the measurement switch gently
and immediately step on your scale.
With all of the display segments indicated (sev-
eral seconds) and before 0.00 kg appears, step
on the scale without any baby or animal in your
hands. Wait for 0.00 kg to appear.
3Step off the scale and pick up the baby
or animal, then step on the scale again.
Within ten seconds after 0.00 kg and the mark
are displayed, step on your scale with the baby
or animal. Remain still during the measurement
until the mark is displayed.
4The weight of the baby or animal can
be read after the mark is displayed.
The scale is turned off automatically after
approximately five seconds.
5Step off the scale.
- 5 -
Memory Function
Up to 31 weight data can be stored in memory. The 32nd data is stored by
deleting the oldest stored data. The difference from the previous result is
displayed automatically.
Storing a Current Weight.
1Set the slide switch to “MEMORY”.
2Press the measurement switch gently.
The last weight is displayed.
3Step on your scale.
When 0.00 kg and the mark are displayed,
step on your scale gently. The measure-
ment is started when the mark disap-
pears. Remain still during the measurement.
If 0.00 kg is displayed for approximately
ten seconds, the scale is automatically
turned off.
4The weight can be read after the
mark is displayed.
5Step off the scale.
6The weight is stored in memory
and the difference from the last
weight is displayed.
The weight data is stored in memory
and the difference from the previous
result is displayed for approximately
five seconds. And, the scale is auto-
matically turned off.
- 6 -
Displaying the Weight Data Stored in the Scale
The stored measurement data is displayed in order, beginning with the most
recent measurement.
1Set the slide switch to “MEMORY”.
2With the scale turned off, press and hold
the measurement switch gently.
The weight data are displayed in order from the
last result. The scale is automatically turned off.
If you want to stop displaying the data, press
the measurement switch.
Slide switch Measurement switch
- 7 -
Target Function
The difference between the preset target weight and the current weight can
be displayed.
Presetting a New Target Weight
1Set the slide switch to “TARGET”.
2With the scale turned off, press and hold
the measurement switch gently.
The preset target weight is displayed.
3Using the measurement switch, set a
new target weight.
Press and release the measurement switch to
increase the value in increments of 0.1.
Press and hold the measurement switch to
increase the value continuously.
4When the desired value is displayed,
release the measurement switch to
store it.
The scale is automatically turned off after the
new target weight is displayed for approximately
five seconds.
Slide switch Measurement switch
- 8 -
Comparing a Current Weight with a Preset Target Weight
1Set the slide switch to “TARGET”.
2Press the measurement switch gently.
The stored target weight is displayed.
3Step on the scale.
When 0.00 kg and the mark are
displayed, step on your scale
gently.
The measurement is started when
the mark disappears. Remain still
during the measurement.
If 0.00 kg is displayed for approxi-
mately ten seconds, the scale is au-
tomatically turned off.
4The difference between the pre-
set target weight and the current
weight is displayed.
The scale is automatically turned off
after the difference is displayed for ap-
proximately five seconds.
5Step off the scale.
- 9 -
BMI Indication
BMI
Body Mass Index or BMI (kg/m2), based
on an individual’s height and weight, is
a helpful indicator of underweight, over-
weight or obesity, in adults.
According to the new NHLBI (National
Institutes of Health) guidelines, he BMI
score is as indicated in the list.
Underweight Below 18.5
Normal 18.5 to 24.9
Overweight 25.0 to 29.9
Obesity 30.0 and Above
Presetting Your Height
Store your height before measuring your weight to calculate the BMI.
The scale can store a height between 30 cm and 220 cm in increments of 0.1 cm.
1Set the slide switch to “BMI”.
2With the scale turned off, press and hold the
measurement switch gently.
The preset height is displayed.
3Using the measurement switch, set a new
height.
Press and release the measurement switch to increase
the value in increments of 0.1.
Press and hold the measurement switch to
increase the value continuously.
4When the desired value is displayed, release
the measurement switch to store it.
The scale is automatically turned off after the new
height is displayed for approximately five seconds.
- 10 -
Andere Handbücher für UC-321
2
Inhaltsverzeichnis
Andere A&D Skala Handbücher
A&D
A&D UC-321PL Gebrauchs- und Pflegehandbuch
A&D
A&D EK-400H Bedienungsanleitung
A&D
A&D FG Series Bedienungsanleitung
A&D
A&D GX-M Series Bedienungsanleitung
A&D
A&D FG Series Bedienungsanleitung
A&D
A&D GF Series Bedienungsanleitung
A&D
A&D UC-350BLE Bedienungsanleitung
A&D
A&D SB-30 Bedienungsanleitung
A&D
A&D FY-3000 Bedienungsanleitung
A&D
A&D FG 60K Bedienungsanleitung
A&D
A&D GX-A Series Bedienungsanleitung
A&D
A&D EM SERIES Bedienungsanleitung
A&D
A&D HR-250AZ Bedienungsanleitung
A&D
A&D Titan HW-200K-WP Bedienungsanleitung
A&D
A&D HF-6000G Bedienungsanleitung
A&D
A&D SW-150KL Bedienungsanleitung
A&D
A&D GX-AE Series Bedienungsanleitung
A&D
A&D UC-352BLE-V Bedienungsanleitung
A&D
A&D EK-i Series Bedienungsanleitung
A&D
A&D HL-200i Bedienungsanleitung
