AAVARA PCE122 Bedienungsanleitung
PCE122
HDMI Over Single Coaxial Splitter/Extender
User Guide
WWW.AAVARA.COM
AAVARA INNOVATION CORP.
ALL RIGHTS RESERVED
Rev 1.0
2
TABLE OF CONTENTS
Chapter 1............................................................. 3!
Introduction ........................................................ 3!
1.1!Features ......................................................... 3!
1.2!Content of Package........................................ 3!
1.3 Technical Specifications................................. 4!
Chapter 2............................................................. 5!
Installation .......................................................... 5!
Chapter 1
Introduction
Aavara®PCE122 HDMI over Single Coaxial Extender offering 120M HDMI 1080p video and 7.1 channel
audio is also being introduced with the objective to, again, simplify installations. Coaxial cable is very
suitable for both in-door and out-door deploy, plus PCE122 ultra long distance ultra high video quality
transmission makes PCE122 the perfect solution for signage and residential AV application. The PCE122
also boasts built-in 1 to 2 Coaxial Splitter in Sender and One Coaxial Cascade output in Receiver which
brings greater flexibility as it supports up to 5 layers Cascadable across 600M 1080p video with 7.1 channel
audio transmission, for 10 connected TVs, displays or projectors or more. The BNC connector design also
ensures a solid coaxial cable connection for vibration and shock resisting.
1.1 Features
120M 1080 video transmission with 7.1 channel surround sounds
Integrated audio embedded for the carriage of up to 8 channels of 48kHz digital audio
1 to 2 Coaxial Splitter built-in in Sender for two Receivers connectivity
One Coaxial Cascade output built-in in Receiver for further extension.
5 layers Cascadable for up to 600M video transmission and up to 10 TV/Display/Projector connected.
Support HDMI 12-bit Deep Color
Serial digital video transmitter for SD and HD video:
SD 480i and 480p, 576i and 576p
HD 720p @24, 30, 50 and 60
HD 1080i @50 and 60
HD 1080p @24, 30, 50 and 60.
Supports 8 bit, 10 bit or12 bit digital video:
RGB or YCbCr 4:4:4: sampled
YCbCr 4:2:2 or 4:2:0 samples
Lip-Sync Pass Through
DVI Specification 1.1Compliant
HDCP Rev1.1specification Compliant
HDMI 1.3 Compliant
Plug-and-play. Installs in seconds
1.2 Content of Package
(1) PCE122-S Sender or PCE122-R
(2) 5V DC Power Supply
(3) User Manual
4
1.3Technical Specifications
Sender
Receiver
Item Name
PCE122-S
PCE122-R
Input Connector
HDMI Type A x 1
Coaxial BNC x 1
Output Connector
Coaxial BNC x 2 (1 to 2 Splitter)
HDMI Type A x 1
Coaxial BNC x 1 (Cascade Out)
Video Bandwidth
2.97Gb/s data rates
Resolution
HD 720p, 1080i, 1080p
SD 480i, 480p, 576i, 576p
Max. Distance by Cable
& Resolution
HD 120M by RG6U, 80M by RG59U
SD 300M by RG6U, 210M by RG59U
Dimension
92.4 x 117.8 x 29 (mm)
Weight
Operating Temperature
+0 to +40° C (+32° to 104° F)
Operating Humidity
10% to 85% (Non-condensing)
Storage Temperature
-20° to +60° (+20° to +140° F)
External Power Supply
5VDC / 2A
5VDC / 2A
Power Consumption
5 Watts( Max)
5 Watts( Max)
Panel Layout:
Receiver Front Panel Receiver Rear Panel
Sender Front Panel Sender Rear Panel
5
Chapter 2
Installation
One Sender to One Receiver/HDTV configuration:
1 Connect HDMI cable between HDMI output port of video sourceand HDMI input port of PCE122 Sender.
2 Connect one 75 Ohm RG6U Coax cable between Coax 1 or Coax 2 output port of PCE122 Sender and
Coax in input port of PCE122 Receiver.
3 Connect the HDMI cable between input port of HDTV/display and the HDMI output port of PCE122
Receiver.
4 Connect the included 5V DC power supplies to PCE122 Sender and Receiver.
5 Power on the HDTV Display and PCE122 Receiver, then Video Source and PCE122 Sender.
One Sender to Multiple Receivers/HDTVs configuration:
1 Connect HDMI cable between HDMI output port of video source and HDMI input port of PCE122 Sender.
2 Connect one 75 Ohm RG6U Coax cable between Coax 1 output port of PCE122 Sender and Coax in
input port of Receiver 1.
3 Splitter mode: Connect one 75 Ohm RG6U Coax cable between Coax 2output port of PCE122 Sender
and Coax in input port of Receiver 2.
4 Cascade mode: Connect one 75 Ohm RG6U Coax cable between the Coax cascade output port of
Receiver 1 and Coax in input port of Receiver 3.
5 Repeat Step 4 to connect all Receivers with Coax cables in Cascade mode.
6 Connect the HDMI cables between input port of each HDTV display and the HDMI output port of each
Receiver.
7 Connect the included 5V DC power supplies to all Sender and Receivers.
8 Power on the HDTV displays and PCE122 Receivers, then video source and PCE122 Sender.
Please refer the following diagram:
6
ALL RIGHTS RESERVED. 2010 AAVARA INNOVATION CORP.
Inhaltsverzeichnis
Andere AAVARA Extender Handbücher
