AAxeon LNP-600N Bedienungsanleitung

6-port Industrial Managed PoE Ethernet Switch

User’s Manual

Version 1.2

Aaxeon Technologies, LLC

Table of Content

Getting to Know Your Switch........................................................................3

1.1 About the LNP-600N/LNP-602N Managed Industrial Switch................................... 3

1.2 Software Features.................................................................................................... 3

1.3 Hardware Features................................................................................................... 3

Hardware Installation.....................................................................................4

2.1 Installing Switch on DIN-Rail.................................................................................... 4

2.1.1 Mount LNP-600N/LNP-602N Series on DIN-Rail ................................................ 4

2.2 Wall Mounting Installation ........................................................................................ 5

2.2.1 Mount LNP-600N/LNP-602N Series on wall........................................................ 5

Hardware Overview........................................................................................7

3.1 Front Panel............................................................................................................... 7

3.2 Front Panel LEDs................................................................................................... 10

3.3 Bottom Panel.......................................................................................................... 10

3.4 Rear Panel ..............................................................................................................11

Cables...........................................................................................................12

4.1 Ethernet Cables...................................................................................................... 12

4.1.1 100BASE-TX/10BASE-T Pin Assignments........................................................ 12

4.2 Fibers ..................................................................................................................... 13

WEB Management........................................................................................14

5.1 Configuration by Web Browser .............................................................................. 14

5.1.1 About Web-based Management........................................................................ 14

5.1.2 Basic Setting...................................................................................................... 16

5.1.2.1 Switch setting ............................................................................................ 16

5.1.2.2 Admin Password ....................................................................................... 16

5.1.2.3 IP configuration ......................................................................................... 17

5.1.2.4 SNTP Configuration .................................................................................. 18

5.1.2.5 Backup & Restore ..................................................................................... 21

5.1.2.6 Upgrade Firmware..................................................................................... 21

5.1.2.7 Factory Default.......................................................................................... 22

5.1.2.8 System Reboot.......................................................................................... 22

5.1.3 Port Configuration.............................................................................................. 23

Aaxeon Technologies, LLC

5.1.3.1 Port Control............................................................................................... 23

5.1.3.2 Port Status................................................................................................. 23

5.1.4 Redundancy....................................................................................................... 24

5.1.4.1 Fast Recovery Mode................................................................................. 24

5.1.4.2 Redundant Ring ........................................................................................ 24

5.1.4.3 RSTP......................................................................................................... 26

5.1.5 SNMP Configuration .......................................................................................... 28

5.1.5.1 SNMP – Agent Setting.................................................................................... 28

5.1.5.2 SNMP –Trap Setting ................................................................................. 29

5.1.6 VLAN.................................................................................................................. 30

5.1.6.1 VLAN Configuration – Port Based............................................................. 30

5.1.7 Warning.............................................................................................................. 31

5.1.7.1 Fault Alarm ................................................................................................ 31

5.1.8 Front Panel ........................................................................................................ 36

5.1.9 Save Configuration ............................................................................................ 36

5.1.10 LLDP.............................................................................................................. 37

5.1.11 Power over Ethernet (P.O.E.)........................................................................ 37

5.1.12 Auto-Ping Check............................................................................................ 39

5.1.13 Schedule........................................................................................................ 40

Technical Specifications .............................................................................41

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

Getting to Know Your Switch

1.1 About the LNP-600N/LNP-602N Managed Industrial

Switch

The LNP-600N/LNP-602N switch is a cost-effective and powerful industrial switch with many

features. These switches can work under wide temperature and dusty environment and

humid condition.The LNP-600N/LNP-602N support Power over Ethernet, a system to

transmit electrical power with data to remote devices over standard twisted-pair cable. The

LNP-600N/LNP-602N switch has 4 X 10/100TX PSE (Power Sourcing Equipment) ports

which are fully compliant with IEEE 802.3af standard.

1.2 Software Features

World’s fastest Redundant Ethernet Ring (Recovery time < 10ms over 250 units

connection)

Supports Ring Coupling, Dual Homing and RSTP over Redundant Ring

Support fast recovery mode

Easy web configuration

1.3 Hardware Features

Wide Operating Temperature: -40 to 75oC

Storage Temperature: -40 to 85 oC

Operating Humidity: 5% to 95%, non-condensing

4 10/100Base-T(X) Ethernet port with PSE provides up to 25 watts

10/100Base-T(X) Ethernet port

100Base-FX Fiber port

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

Hardware Installation

2.1 Installing Switch on DIN-Rail

Each switch has a DIN-Rail kit on rear panel. The DIN-Rail kit helps switch to fix on the

DIN-Rail. It is easy to install the switch on the DIN-Rail:

2.1.1 Mount LNP-600N/LNP-602N Series on DIN-Rail

Step 1: Slant the switch and mount the metal spring to DIN-Rail.

Step 2: Push the switch toward the DIN-Rail until you heard a “click” sound.

Metal Spring

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

2.2 Wall Mounting Installation

Each switch has another installation method for users to fix the switch. A wall mount panel

can be found in the package. The following steps show how to mount the switch on the

wall:

2.2.1 Mount LNP-600N/LNP-602N Series on wall

Step 1: Remove DIN-Rail kit.

Step 2: Use 6 screws that can be found in the package to combine the wall mount panel.

Just like the picture shows below:

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

The screws specification shows in the following two pictures. In order to prevent switches

from any damage, the screws should not be larger than the size that is used in the switch.

Pozidrive

Step 3: Mount the combined switch on the wall.

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

Hardware Overview

3.1 Front Panel

The following table describes the labels that stick on the LNP-600N/LNP-602N.

Port Description

10/100 RJ-45 fast

Ethernet ports

10/100Base-T(X) RJ-45 fast Ethernet ports support

auto-negotiation.

Default Setting :

Speed: auto

Duplex: auto

Flow control : disable

Fiber port 100BaseFX

P.O.E. Port Port 1 ~ 4 contain PSE function compliant with IEEE802.3af

P.O.E. specifications.

ResetPush reset button 2 to 3 seconds to reset the switch.

Push reset button 5 second to reset the switch into Factory

Default.

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

LNP-600N

1. LED for PWR1. When the PWR1 links, the green led will be light on.

2. LED for PWR2. When the PWR2 links, the green led will be light on.

3. LED for PWR3. When the PWR3 links, the green led will be light on.

4. LED for R.M. (Ring master). When the LED light on, it means that the switch is the ring

master of Redundant Ring.

5. LED for Ring. When the led light on, it means the Redundant Ring is activated.

6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.

7. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.

8. 10/100Base-T(X) Ethernet ports.

9. LED for Ethernet ports status.

10. 10/100Base-T(X) Ethernet ports.

11. LED for Ethernet ports status.

12. LED for P.O.E. power supplied.

LNP600N / LNP-602N User’s Manual

Aaxeon Technologies, LLC

LNP-602N

1. LED for PWR1. When the PWR1 links, the green led will be light on.

2. LED for PWR2. When the PWR2 links, the green led will be light on.

3. LED for PWR3. When the PWR3 links, the green led will be light on.

4. LED for R.M. (Ring master). When the LED light on, it means that the switch is the ring

master of Redundant Ring.

5. LED for Ring. When the led light on, it means the Redundant Ring is activated.

6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.

7. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.

8. 10/100Base-T(X) Ethernet ports.

9. LED for Ethernet ports status.

10. 100BaseFX fiber port.

11. LNK/ACT LED for fiber port.

12. LED for P.O.E. power supplied.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AAxeon Schalten Handbücher

AAxeon

AAxeon LNX-1002NM-67-T Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung