Abask M18 Bedienungsanleitung
User Manual
Contents
English…….......……………….…….. 01-13
Deutsch…………….......…………….14-29
Español………………….......……….30-44
Italiano………………...….......…….... 45-59
Français……………….....………….. 60-75
Important Notice
• This product is intended for use in motor vehicle only.
Do NOT install the camera where it might block the driver’
s view of road(including the mirrors) or the deployment of
the airbag.
• Please make sure you are using a high-speed Micro SD
card (Class 10 or above, max supports 128GB.), and format
the card in the camera menu at the first use.
• Be sure the camera lens is clean and there is nothing
blocking the lens.
• DO NOT leave the camera in direct sunlight for a long
period of time or where the temperature could go above
140°F(60°C)
• If the camera is recording, you can't go into menu
setting, please press OK to stop video recording first.
• To work, the dash cam must be connected to the car's
cigarette lighter socket or hardwired to the car's fuse box.
• To use Parking Monitor when the car engine is off, please
buy a hard wire kit (mini USB type) for dash cam and then
connect it with the dash cam to the vehicle’s fuse box so
as to supply the power to the camera.
1
Interface and Button Function
1. Speaker
2. Lens
3. Micro SD Card Slot
4. UP
5. Menu
6. Down
7. OK button
8. Mode
9. Manual Lock
10.Power
11.Reset
12.MIC
13.Rear Camera Connector
14.Mount Bracket
15.USB Power-In
3
4
5
6
7
8
9
10
12
11
13 14
15
12
2
Button Function
UP
▲
• In menu setting, short press to select option and
adjust values.
• In playback mode, short press to select media files.
• In video mode, short press to switch front and
rear camera view.
• In video/photo/playback mode(video/playback
stopped), short press to access the menu settings
for that particular mode.
• In menu setting,short press to select option and
adjust values.
• In playback mode, short press to select media files.
• In video mode, short press to turn ON/OFF audio
recording.
• In video mode, short press to start/stop video
recording.
• In photo mode, short press to take a photo.
• In menu setting, short press to confirm selection
and adjustment.
• In playback mode, short press to select and play
recorded files.
• In playback mode, short press to stop/start playing
MENU
Down
▼
OK
Mode • In stand by mode, press to switch mode :
Video/Photo/ Playback.
Manual
Lock
• During video mode, short press to manually lock
current video file.
Power • Long press to turn ON/OFF the camera.
3
Set up and Installation
1.Use the suction cup mount to install the M18 dash cam
on the windshield, recommended place near the rear view
mirror facing front, adjust the lens angle for best coverage.
2.Plug the included power adapter Into the car cigarette
lighter socket, the indicator will light up meaning power is
on.
3.Connect the power cable to the camera. For better
looking, route the excess cable alongside the Interior trim
as the diagram shows.
4.Install the rear view camera on the rear windscreen (inside
the car), adjust the lens angle for best coverage, then
connect the rear camera connector to the main unit.
5. After installation, please start the engine, and do a bench
test to make sure all function works well.
4
Operating Mode
The M18 operates in 3 modes: Video Recording Mode,
Photo
Mode and Playback Mode, These modes also have menu
to help you configure recording .
Press [M]button to switch between different modes and
access the mode you want. The red light on top left corner
of the screen means the dash cam has the power on. The
blue light flash means the dash cam is recording.
A. Video recording Mode
The camera will automatically enter video recording mode
and start recording when connected to a car charger and
power on.
A Red dot flashing on the top left corner indicates recording
is in progress. Press the to stop recording, or start
recording again.
1. Video Mode Icon 5. Video Resolution
2. Time & Date 6. Audio Recording Icon
3. Recording Indicator 7. Power Indicator
4. Recording Time 8. Rear Camera view
OK
5
In all 3 operating mode, you can press the button once
to access the menu settings.
Press ▲and ▼ to scroll through the various setting options
and press to select and confirm selection.
Press again to exit the setting menu.
Video Recording Menu
Resolution: Adjust front lens recording video resolution,
1080P 30fps / 720P 30fps available. The rear camera will
record in 1080P only.
Cycle Record (Loop Recording) : This function allows you
to set video file length to 1/2 minutes, Selecta value to
activate loop recording, so when storage fills up,it will
automatically loop back to the earliest file and overwrite it.
WDR: Turn on and off the WDR function.
Audio Record: Turn ON/OFF audio recording in video.
G-Sensor: OFF / Low / Middle / High. G-sensor will detect
significant or sudden shock and movement then the camera
will automatically lock current recording file from loop
recording, detection sensitivity can be adjusted accordingly.
Parking Monitor: With optional hard wire kit connected, the
OK
6
parking monitor is enabled, the camera will stay standby
after the engine is turned off. When camera detects
shaking, it will automatically turn on and take a short
video, then return to standby automatically.
Beep: Turn ON / OFF button operation notification sound.
Time Setup: Setup time and date, Use the UP and Down
button to adjust values, press OK to confirm changes.
Date Format: Enable/ Disable the date and time marked
in image files. YYYY-MM-DD / M-M-DD-YYYY/ DD-MM-
YYYY available.
Language : Choose the camera system language.
Light Frequency: Adjust light frequency according to
local regulation, 50Hz/ 60Hz available.
Screen Saver: OFF/30S/1 min/3 min available. Set the
time to automatically turn off the LCD display after no
operation.
Motion Detection: Turn ON / OFF motion detection
function.
Format: Format the memory card.
Reset Setup: Reset all settings back to factorydefault.
Version: Check camera firmware version.
7
B. Photo Taking Mode
The M18 dash camera can operate in Photo Taking Mode,
and take HD photo.
To take a photo:
In standby mode, press [M] to switch to Photo Mode, and
thenpress to take a photo.
Playback Mode:
This mode allows you to playback recorded video or view
photos, and manage the recorded files.
1.Stop the video recording, Press the [M] button twice to
enter Playback Mode, you can view all the files in this mode.
2.In Playback Mode, the File folders will be displayed in
order: Front Camera Video (Normal Files as default)Rear
Camera Video (Normal Files as default)Front Camera Photo
Rear Camera Photo Press [M] Button to switch to the Next
folder.
3.Use the UP and DOWN button to scroll through the
recorded files / photos, and press OK to play or pause
playing the selected file.
4.Press Menu button to quit playback and return to file list.
5.Use the Playback Menu to manage the files. Press Menu
button to enter setup menu.
OK
8
Inhaltsverzeichnis
Sprachen:
Andere Abask Dashcam Handbücher
