ABB FOX61 Series Bedienungsanleitung
ABB Power Systems
FOX61x
LEDE1
User Manual
User Manual FOX61x
LEDE1
Release History: Release 1: December 2012
Copyright and Confidentiality: Copyright in this document vests in ABB LTD.
Manuals and software are protected by copyright. All rights reserved. The copying,
reproduction, translation, conversion into any electronic medium or machine scannable form
is not permitted, either in whole or in part. The contents of the manual may not be disclosed
by the recipient to any third party, without the prior written agreement of ABB.
An exception is the preparation of a backup copy of the software for your own use. For
devices with embedded software, the end-user license agreement on the enclosed CD
applies.
This document may not be used for any purposes except those specifically authorised by
contract or otherwise in writing by ABB.
Disclaimer: ABB has taken reasonable care in compiling this document, however ABB accepts no liability
whatsoever for any error or omission in the information contained herein and gives no other
warranty or undertaking as to its accuracy.
ABB can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of
use specified in the license contract.
ABB reserves the right to amend this document at any time without prior notice.
Blank pages: Any blank page present is to accommodate double-sided printing.
Document No.: 1KHW002473
ABB Switzerland Ltd
Power Systems
Bruggerstrasse 72
CH-5400 Baden
Switzerland © December 2012 by ABB Switzerland Ltd
FOX61xLEDE1 3
Table of Contents
1Preface 9
1.1 Precautions and safety 9
1.2 Symbols and notations 9
1.3 Interfaces and circuit categories 9
1.4 Document history 10
2 Introduction 11
2.1 General 11
2.2 Unit view 12
3 Functions and specifications 13
3.1 Feature licences 13
3.2 LEDE1 function overview 13
4 Installation 15
4.1 Prerequisites 15
4.2 Slots for the LEDE1 unit 15
4.3 Compatibility 15
4.3.1 FOX61x units 15
4.3.2 Previous ESW revisions 16
4.4 Connections and cables 16
4.4.1 Front connector of the LEDE1 unit 16
4.4.2 8 x 2 Mbit/s cable 120 17
4.4.3 8 x 2 Mbit/s 75 termination 17
4.4.4 Fixing the cables to the cable tray 17
5 Functional description 19
5.1 P12 termination modes 19
5.1.1 Terminated transport modes 19
5.1.2 Transparent transport modes 20
5.2 Protection 21
6 Commissioning 23
6.1 Commissioning of an E1 port 24
6.1.1 Prerequisites 24
6.1.1.1 CESM1 unit 24
6.1.1.2 LEDE1 unit 24
6.1.1.3 PETS 24
6.1.2 Configuration of an E1 port 24
7 Operation and maintenance 27
7.1 Unit optical indicators 27
7.2 Loops 28
4FOX61xLEDE1
7.3 Maintenance 29
7.3.1 Inventory data 29
7.3.2 Unit ESW download 29
8FOXCSTreference 31
8.1 Introduction 31
8.2 AP: / unit-x: LEDE1 32
8.2.1 AP: / unit-x, Overview 32
8.2.2 AP: / unit-x, Main 32
8.2.3 AP: / unit-x, Fault Management 33
8.3 AP: / unit-x / port-y 34
8.3.1 AP: / unit-x / port-y, Overview 34
8.3.2 AP: / unit-x / port-y, Main 34
8.3.2.1 AP: / unit-x / port-y, Main - General 34
8.3.2.2 AP: / unit-x / port-y, Main - Admin And Oper Status 35
8.3.3 AP: / unit-x / port-y, Configuration 35
8.3.3.1 AP: / unit-x / port-y, Configuration - General 36
8.3.3.2 AP: / unit-x / port-y, Configuration - Synchronization 37
8.3.3.3 AP: / unit-x / port-y, Configuration - Channels 38
8.3.4 AP: / unit-x / port-y, Fault Management 40
8.3.4.1 AP: / unit-x / port-y, Performance Management - G.826 41
8.3.4.2 AP: / unit-x / port-y, Performance Management - P12 Events 41
8.3.5 AP: / unit-x / port-y, Status 42
8.3.5.1 AP: / unit-x / port-y, Status - Maintenance 42
8.3.5.2 AP: / unit-x / port-y, Status - QL 43
8.4 AP: / unit-x / port-y / chan-z 43
8.4.1 AP: / unit-x / port-y / chan-z, Main 43
8.4.1.1 AP: / unit-x / port-y / chan-z, Main - General 43
8.4.2 AP: / unit-x / port-y / chan-z, Main 43
8.4.2.1 AP: / unit-x / port-y / chan-z, Main - General 43
8.4.2.2 AP: / unit-x / port-y / chan-z, Main - Admin And Oper Status 44
8.4.3 AP: / unit-x / port-y / chan-z, Configuration 44
8.4.3.1 AP: / unit-x / port-y / chan-z, Configuration - CTP 44
8.4.4 AP: / unit-x / port-y / chan-z, Fault Management 46
8.4.5 AP: / unit-x / port-y / chan-z, Performance Management 46
8.4.5.1 AP: / unit-x / port-y / chan-z, Performance Management - Protection 47
8.4.6 AP: / unit-x / port-y / chan-z, Status 47
8.4.6.1 AP: / unit-x / port-y / chan-z, Status - Maintenance 47
8.4.6.2 AP: / unit-x / port-y / chan-z, Status - CTP 47
9 Annex 49
9.1 Associated documents 49
FOX61xLEDE1 5
Figures
Figure 1: LEDE1 used as an access unit (top) and as a transport unit (bottom) 11
Figure 2: LEDE1 unit view 12
Figure 3: Pin-out of the LEDE1 front connector, front view 16
Figure 4: Side view of the cable tray and the cable in FOX615 18
Figure 5: Top view of the cable tray and the cable in FOX612 18
Figure 6: P12 SNCP with two SAMO1 units 21
Figure 7: Fault indication LEDs on the LEDE1 unit 27
Figure 8: Loops on the E1 port 28
Figure 9: MOM (managed object model) of the LEDE1 unit 31
6FOX61xLEDE1
FOX61xLEDE1 7
Tables
Table 1: Electrical interfaces and circuit categories 9
Table 2: Document history 10
Table 4: Pins of the E1 ports 17
Table 5: Wiring of the E1 ports 17
Table 7: Managed objects (MOs) for LEDE1 31
Table 11: AP: / unit-x / port-y, Configuration - Synchronization 37
Table 13: PM counter interval availability 40
Table 14: PM group: G.826 41
Table 15: PM group: P12 Events 41
Table 21: PM counter interval availability 46
Table 22: PM group: Protection 47
8FOX61xLEDE1
PREFACE
FOX61xLEDE1 9
1 Preface
1.1 Precautions and safety
Before you handle any equipment you must comply with the safety advices.
Adherence to the safety instructions ensures compliance with the safety
requirements as defined in EN 60950 (Safety of Information Technology
Equipment).
Please refer to the following document:
"1KHW002459 FOX61x Release Notes".
1.2 Symbols and notations
This User Manual uses the following symbols:
Risk of operating trouble!
Indicates that an action may lead to operating trouble or loss of data.
Possible actions are given.
Please note:
Shows significant information.
Possible actions are given.
1.3 Interfaces and circuit categories
Table 1: Electrical interfaces and circuit categories
LEDE1 interface Circuit category
according to EN
60950-1
Max. rating
Voltage Current
Local power supply TNV2 < 72 VDC < 0.1 A
ITU-T G.703 electrical interfaces SELV < 3.3 Vpeak < 10 mA
PREFACE
10 FOX61xLEDE1
1.4 Document history
Table 2: Document history
Date FOX61x
Release
Changes since previous version
December 2012 R1 This is the first release for FOX61x
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ABB Steuereinheit Handbücher
ABB
ABB 650 series Gebrauchsanweisung
ABB
ABB ACS 800 Series Bedienungsanleitung
ABB
ABB SmissLine TP ZLS 260 Benutzerhandbuch
ABB
ABB FENA-21 Installationshandbuch
ABB
ABB REF542plus Bedienungsanleitung
ABB
ABB FCB400 Series Bedienungsanleitung
ABB
ABB Relion 670 series Kurzanleitung
ABB
ABB ACQ580-04 Bedienungsanleitung
ABB
ABB RPBA-01 Bedienungsanleitung
ABB
ABB FDNA-01 Installationshandbuch
ABB
ABB RED615 ANSI Bedienungsanleitung
ABB
ABB ACS880-304 +A003 Series Bedienungsanleitung
ABB
ABB IEC 60870-5-103 Bedienungsanleitung
ABB
ABB REF542plus Leitfaden
ABB
ABB Tina 5A Bedienungsanleitung
ABB
ABB MPS-C 2000 Bedienungsanleitung
ABB
ABB ACQ580-34 Bedienungsanleitung
ABB
ABB Relion SAM600-IO Bedienungsanleitung
ABB
ABB Relion 615 series Bedienungsanleitung
ABB
ABB ACS850 series Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
