ABB FPBA-01 PROFIBUS DP Installationshandbuch

Options for ABB drives, converters and inverters

Quick installation and start-up guide

FPBA-01 PROFIBUS DP adapter module

Safety instructions

WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the

equipment can occur. See the user’s manual.

Mechanical installation

Electrical installation

Layout of the module

1. Pull out the lock.

2. Install the module carefully to an option

module slot of the drive. See the drive

hardware manual.

3. Push in the lock.

4. Tighten the screw to torque 0.8 N·m using

a Torx TX10 screwdriver.

WARNING! Do not use excessive force,

or leave the screw too loose. Over-

tightening can damage the screw or

module. A loose screw decreases the EMC

performance, and can even cause an operation

failure.

No. Description

1Lock

2 Mounting and grounding screw

3 Bus connector [X1]

4 Diagnostic LEDs

Start-up

When the module is connected to the drive, the drive control program sets the applicable parameters.

See the appropriate drive manual.

Basic parameter settings

To take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par refresh.

Further information

Index Name Value

20.01 Ext1 commands Fieldbus A

22.11 Speed ref1 source FBA A ref 1

28.11 Frequency ref1 source FBA A ref 1

50.01 FBA A enable Enable (or select the option slot in which the module is installed)

50.02 FBA A comm loss func Fault

51.02 Node address Set the node address of the module according to the network configuration.

51.05 Profile The ABB Drives communication profile is the default value.

52.01 FBA A data in1 SW 16bit

52.02 FBA A data in2 Act 16bit

53.01 FBA A data out1 CW 16bit

53.02 FBA A data out2 Ref1 16bit

See the latest version of FPBA-01 PROFIBUS DP adapter

module user's manual (3AFE68573271 [English]) in ABB

library (www.abb.com/drives/documents).

For more information on fieldbus options and protocols

provided by ABB Drives, see the fieldbus

communications web page

(new.abb.com/drives/connectivity/fieldbus-connectivity).

Connection procedure

It is recommended to use a PROFIBUS-

approved D-SUB 9 connector. These

connectors have a built-in termination network

and inductors for station capacitance

compensation.

Connect the cable to the D-SUB connector as

shown in this figure.

1A 1B 2A 2B

Green

Red

Green

Red

OUT

Grounding clamp/

Strain relief

3AXD50000158188 Rev A (EN) 2017-11-23

FPBA-01 manual

Fieldbus communications web page

Andere Handbücher für FPBA-01 PROFIBUS DP

Inhaltsverzeichnis

Andere ABB Steuereinheit Handbücher

ABB

ABB Relion 615 series Bedienungsanleitung

ABB

ABB RBIP-01 Bedienungsanleitung

ABB

ABB Welcome M2307 Einrichtungshandbuch

ABB

ABB XIO-00 Bedienungsanleitung

ABB

ABB jokab safety Smile Tina Series Bedienungsanleitung

ABB

ABB FCB400 Series Bedienungsanleitung

ABB

ABB FCAN-01 Installationshandbuch

ABB

ABB ACS880-1604 Bedienungsanleitung

ABB

ABB TruONE Ekip Bedienungsanleitung

ABB

ABB REC650 ANSI Bedienungsanleitung

ABB

ABB i-bus EIB Bedienungsanleitung

ABB

ABB Relion REM615 Bedienungsanleitung

ABB

ABB FCAN-01 Installationshandbuch

ABB

ABB COM600 series Bedienungsanleitung

ABB

ABB OMD200 Benutzerhandbuch

ABB

ABB Symphony Harmony Series Bedienungsanleitung

ABB

ABB COM600 series 5.0 Produkthandbuch

ABB

ABB FSE-31 Bedienungsanleitung

ABB

ABB IEC 60870-5-103 Bedienungsanleitung

ABB

ABB RET615 Bedienungsanleitung

ABB

ABB ACSM1-04 Series Bedienungsanleitung

ABB

ABB Relion SAM600 Bedienungsanleitung

ABB

ABB Relion 630 Series Bedienungsanleitung

ABB

ABB ACS 800 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung