ABB Ability BECL/D.200.16 Bedienungsanleitung

Product Manual | 13.02.2023 | V 1.5

ABB AbilityTM

BECL/D.200.16

Building Edge Control

Branding -- Release 201 8-01-01

Table of Contents

2CKA001473B5394

│2

Table of Co ntents

Notes on the instruction manual.................................................................................................................3

Safety.........................................................................................................................................................4

2.1

Intended use ...................................................................................................................................5

2.2

Improper use...................................................................................................................................5

2.3

Target group / Qualifications of personnel ......................................................................................5

2.4

Cyber security.................................................................................................................................6

2.4.1

Ports and services for supporting the main functionality...................................................................7

2.4.2

Anti-Malware Software ........................................................................................................................8

2.5

Safety instructions...........................................................................................................................9

Information on protection of the environment ...........................................................................................10

3.1

Environment..................................................................................................................................10

Product description...................................................................................................................................11

4.1

Scope of delivery...........................................................................................................................11

4.2

Device overview............................................................................................................................12

4.3

Functions ......................................................................................................................................13

4.3.1

Description of functions.....................................................................................................................13

4.4

LED Functions...............................................................................................................................15

Technical data..........................................................................................................................................16

5.1

Dimensional drawings...................................................................................................................18

Connection, installation / mounting...........................................................................................................19

6.1

Safety instructions.........................................................................................................................19

6.2

Mounting .......................................................................................................................................20

6.3

Electrical connection .....................................................................................................................21

Maintenance.............................................................................................................................................22

Notes........................................................................................................................................................23

Index ........................................................................................................................................................24

Notes on the instruction manual

2CKA001473B5394

│3

1 Notes on the instruction manual

Please read the manual carefully and observe the instructions and information it contains.

Please keep this manual in a safe place.

ABB accepts no liability for errors and safety problems due the failure to observe the manual.

If you require additional information or have questions about the Building Ecosystem and its

applications, please contact ABB or visit our Internet site at:

https://buildings.ability.abb

Notice

Depending on the user rights, system configuration and equipment, certain

functions and settings cannot be made available.

Safety

2CKA001473B5394

│4

2 Safety

The device has been constructed according to the latest valid regulations governing technology

and is operationally reliable. It has been tested and left the factory in a technically safe and

reliable state.

However, residual hazards remain. Read and adhere to the safety instructions to prevent

hazards of this kind.

ABB accepts no liability for damages due to the failure to observe the safety instructions.

The following Instructions point to particular hazards involved in the use of the device or provide

practical instructions:

Danger

Risk of death / serious damage to health

–The respective warning symbol in connection with the signal word "Danger"

indicates an imminently threatening danger which leads to death or serious

(irreversible) injuries.

Warning

Serious damage to health

–The respective warning symbol in connection with the signal word "Warning"

indicates a threatening danger which can lead to death or serious

(irreversible) injuries.

Caution

Damage to health

–The respective warning symbol in connection with the signal word "Caution"

indicates a danger which can lead to minor (reversible) injuries.

Attention

Damage to property

–This symbol in connection with the signal word "Attention" indicates a

situation which could cause damage to the product itself or to objects in its

surroundings.

Notice

This symbol in connection with the word "Notice" indicates useful tips and

recommendations for the efficient handling of the product.

This symbol alerts to electric voltage.

Safety

2CKA001473B5394

│5

2.1 Intended use

The Smart Edge Gateway BECL/D.200.16 serves as protected, local network node between

bus system, such as BACnet, Modbus or KNX and the IP building network.

The device embeds openBOS®, the ABB operating system for Smart Buildings: a software

platform that establishes the link between any connected equipment of a building and any

software applications that will be used by building managers and/or building occupants.

Building edge connects any device of any brand having open and interoperable IP protocol such

as Modbus, KNX, BACnet and MQTT. It includes an embedded Edge Editor Tool to create the

database of your multiprotocol site.

The BECL/D.200.16 also serves as access point for Cloud platform ABB AbilityTM as well as

Clouds of third-party suppliers via openBOS as a Service (oBaaS).

The BECL/D.200.16 is a modular DIN-Rail component (MDRC) in Pro M-Design. The device is

intended for mounting in installation distributors on 35 mm mounting rails.

The intended use also includes adherence to all specifications in this manual.

2.2 Improper use

Each use not listed in Chapter 2.1 “Intended use“ on page 5 is deemed improper use and can

lead to personal injury and damage to property.

ABB is not liable for damages caused by use deemed contrary to the intended use of the

device. The associated risk is borne exclusively by the user or operator.

The device is not intended for the following:

■Unauthorized structural changes

■Repairs

■Outdoor use

■Use in bathroom areas

2.3 Target group / Qualifications of personnel

Installation, commissioning and maintenance of the device must only be carried out by trained

and properly qualified installer or system integrator.

The installer or system integrator must have read and understood the manual and follow the

instructions provided.

The installer or system integrator must adhere to the valid national regulations in his/her country

governing the installation, functional test, repair and maintenance of electrical products.

The installer or system integrator must be familiar with and correctly apply the "five safety rules"

(DIN VDE 0105, EN 50110):

1. Disconnect

2. Secure against being re-connected

3. Ensure there is no voltage

4. Connect to earth and short-circuit

5. Cover or barricade adjacent live parts;

Safety

2CKA001473B5394

│6

2.4 Cyber security

Industry faces intensifying cyber security risks. In order to increase stability, safety and

robustness in its solutions, ABB has formally established cyber security robustness testing as

part of the product development process.

The following measures are prerequisite for the safe operation of your system. ABB accepts no

liability for non-observance.

Access control and limitation

The careful isolation of the system against unauthorized access is the basis for every protective

concept. Only authorized persons (fitter, caretaker, tenant) are allowed physical access to the

IP network or bus system and its components. This also includes the device described in the

instruction manual.

The best possible protection of the IP or network media (LAN/WLAN) and the transfer node

must be guaranteed already during planning. Sub-distributions with fieldbus devices must be

lockable or be in rooms to which only authorized persons have access.

Bus cabling

■The ends of the bus cables must not be visible, i.e., they must not project out of walls or

channels, either inside or outside of the building.

■Bus cables in outdoor areas or in areas with limited protection represent an increased safety

risk. The physical access should be made exceptionally difficult.

IP Network

The local network represents a sensitive component for secure communication. That is why

unauthorized access to the local network should be prevented. The normal security

mechanisms for IP networks are to be used, e.g.:

■Secure encryption of wireless networks

■Use of complex passwords and protection of these against unauthorized persons

■Physical access to network interfaces (Ethernet interfaces) and network components

(router, switches) should only be possible in protected areas.

■MAC filter (table with certified device addresses)

Connection to the Internet or the local IP network

To prevent improper use, no router ports from the Internet into the building network or home

network are to be opened to the Smart Edge device. A VPN tunnel is suitable for safe remote

control.

The stable and reliable function of the device also depends on the reliability of the local IP

network to which the server is connected. For this reason, additional network components are to

be used to repel the DoS attacks (denial of service) from the Internet. Such attacks can

overload the local IP network or the individual components and make them inaccessible.

Safety

2CKA001473B5394

│7

Safety of user accounts

Set a strong access password during initial commissioning. Use passwords that you have

received from the administrator only for the first login.

Keep passwords secret and use a password manager with two-factor login as memory aid, e.g.,

Keypass.

2.4.1 Ports and services for supporting the main functionality

To support the main functionalities of the device, communication via specific ports and services

must be possible in your local network. Contact your network administrator to set up, if

necessary, the appropriate port sharing.

Attention!

Enabling the port increases the risk of cyber attacks.

–Assign only necessary enabling.

–Regularly check which ports are enabled for which purpose.

In the following table the TCP and UDP services listed on the device are summarized. That is

pure information and is what we are delivering with a new Building edge.

Nevertheless, installer or system integrator must check these standard ports are used locally

and update if any change. Edge Editor embeds all the functions to perform these actions.

Port

Service

Purpose

80/TCP

HTTP

Communication via unencrypted web server

(disabled as standard). There is the risk that third parties can

read the transmitted data.

443/TCP

HTTPS

Communication via encrypted web server

1883/TCP

MQTT

Communication with building fieldbus devices

Is activated only when MQTT communication is required

3671

KNX

Communication with building fieldbus devices

Is activated only when KNX communication is required

502

Modbus

Communication with building fieldbus devices

Is activated only when Modbus communication is required

47808/UDP

BACnet

Communication with building fieldbus devices

Is activated only when BACnet communication is required

68/UDP

DHCP

Assigning the network configuration to clients

Special caution is required when using the fieldbus protocols Modbus, KNX and BACnet. If

possible, use only the BACnet routers that support the BACnet Secure Connect (BACnet/SC).

Modbus/TCP currently offers no safety or encryption functions.

Establish remote connections only via a VPN tunnel.

Safety

2CKA001473B5394

│8

2.4.2 Anti-Malware Software

ABB recommends the following applications for repelling and removing malware.

Building Ecosystem Configuration Tool

McAfee

https://www.mcafee.com

Microsoft Security Essentials

https://de.wikipedia.org/wiki/Microsoft_Security_Essentials

Avira

https://www.avira.com

Clamscan for Win/Mac/OS2/Linux systems

https://de.wikipedia.org/wiki/ClamAV

Calmwin

https://de.wikipedia.org/wiki/ClamAV

MetaDefender (used by EPPC)

https://www.opswat.com/products/metadefender

AVG Anti-Virus

https://www.avg.com

Safety

2CKA001473B5394

│9

2.5 Safety instructions

Danger - Electric voltage!

Electric voltage! Risk of death and fire due to electric voltage of 100 to 240 V.

Dangerous currents flow through the body when coming into direct or indirect

contact with live components. This can result in electric shock, burns or even

death.

■Work on the 100 to 240 V mains may only be performed by authorized and

qualified electricians.

■Disconnect the mains voltage before mounting or dismantling.

■Never use the device with damaged connecting cables.

■Do not open covers that are firmly bolted to the housing of the device.

■Use the device only if it is in a technically faultless state.

■Do not make changes to or perform repairs on the device, its components or

its accessories.

■Keep the device away from water and wet surroundings.

Attention! –Risk of damage to the device due to external factors!

Moisture and contamination can damage the device.

–Protect the device against humidity, dirt and damage during transport,

storage and operation.

Information on protection of the environment

2CKA001473B5394

│10

3 Information on protection of the environment

3.1 Environment

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with household

waste.

–The device contains valuable raw materials that can be reused. Therefore,

dispose of the device at the appropriate collecting facility.

All packaging materials and devices bear the markings and test seals for proper disposal.

Always dispose of the packing materials and electric devices or their components via an

authorized collection facility or disposal company.

The products meet the legal requirements, in particular the laws governing electronic and

electrical devices and the REACH ordinance.

(EU Directive 2012/19/EC WEEE and 2011/65/EC RoHS)

(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)

Inhaltsverzeichnis

Andere ABB Controller Handbücher

ABB

ABB ACS880-01 Series Bedienungsanleitung

ABB

ABB PST30 Handbuch

ABB

ABB UMC100-FBP Stücklistenhandbuch

ABB

ABB +N5600 Gebrauchs- und Pflegehandbuch

ABB

ABB ACS880 Series Gebrauchs- und Pflegehandbuch

ABB

ABB IRC5 Compact Gebrauchsanweisung

ABB

ABB CR307 Series Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

ABB

ABB Ability 800xA Series Bedienungsanleitung

ABB

ABB ACS580-04 Bedienungsanleitung

ABB

ABB Relion 620 Series Bedienungsanleitung

ABB

ABB ECA06 Kurzanleitung

ABB

ABB ACB530 Series Bedienungsanleitung

ABB

ABB C505 Bedienungsanleitung

ABB

ABB MotiFlex e180 Bedienungsanleitung

ABB

ABB AC 800M Bedienungsanleitung

ABB

ABB ACH400 Series Bedienungsanleitung

ABB

ABB Zenith MX350 Gebrauchs- und Pflegehandbuch

ABB

ABB PSTX 30***105 Bedienungsanleitung

ABB

ABB COM600 series Bedienungsanleitung

ABB

ABB PSTX Series Leitfaden

ABB

ABB Relion 670 series Installations- und Betriebshandbuch

ABB

ABB NextMove e100 Bedienungsanleitung

ABB

ABB MS132-32-HKF1-11 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung