ABB ControlMaster CM50 Bedienungsanleitung

—

ABB MEASUREMENT & ANALYTICS | COMMISSIONING INSTRUCTION | CI/CM30/50-EN REV. C

ControlMaster CM30 and CM50

Universal process controllers, ¼ and ½ DIN

Measurement made easy

For more information

Further publications for the ControlMaster CM30

and CM 50 controllers are available for free

download from:

www.abb.com/measurement

or by scanning these codes:

CM30 CM50

Search for or click on:

Data sheet

 

Data sheet

 

User guide (basic functionality)

 IM/CM/B-EN

User guide (standard functionality)

 IM/CM/S-EN

User guide (extended/dual functionality)

 IM/CM/ED-EN

Communications supplement

 



IM/CM/C-EN

To access the IAMA help & support portal please

scan the following code:

CONTROLMASTER CM30 & CM50 | PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C 3

Contents

1 Health & Safety ............................................................4

Document symbols .........................................................4

Safety precautions.......................................................... 4

Potential safety hazards................................................ 5

Electrical .................................................................... 5

Safety standards ............................................................. 5

EC Directive 89/336/EEC............................................... 5

End-of-life disposal ........................................................ 5

Cleaning ............................................................................. 6

Symbols.............................................................................. 6

Restriction of Hazardous Substances (RoHS) ......... 7

2 Specification................................................................8

3 Installation .................................................................10

Siting .................................................................................11

Mounting ......................................................................... 12

4 Electrical connections..............................................15

Accessing the connection terminals ........................ 16

CM30 electrical connections.......................................17

CM50 electrical connections...................................... 18

Standard analog inputs (1 and 2)............................... 19

5 Front panel keys ....................................................... 20

6 Operator level menus ...............................................21

Profile operator page................................................... 22

7 Access levels and security options ........................23

Security options ............................................................ 23

8 Diagnostics messages ............................................ 24

9 Instrument menus.................................................... 30

4CONTROLMASTER CM30 & CM50 |PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C

1 Health & Safety

Document symbols

Symbols that appear in this document are explained

below:

WARNING

The signal word ‘WARNING’ indicates an imminent

danger. Failure to observe this information may

result in death or severe injury.

NOTICE

The signal word ‘NOTICE’ indicates potential

material damage.

Note.

‘Note’ indicates useful or important information about

the product.

Safety precautions



contained within this manual before and during use of

the equipment. Failure to do so could result in bodily

harm or damage to the equipment.

WARNING

Installation and maintenance of this product must

only be conducted by personnel authorized to work

on electrical installations and in accordance with

relevant local regulations.

CONTROLMASTER CM30 & CM50 | PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C 5

Potential safety hazards

Electrical

WARNING



the following points must be observed:

• Up to 240 V AC may be present. Be sure to isolate

the supply before removing the terminal cover.

• Normal safety precautions must be taken to

avoid the possibility of an accident occurring

when operating in conditions of high pressure

and/or temperature.

Safety advice concerning the use of the equipment

described in this manual or any relevant Material

Safety Data Sheets (where applicable) can be



and spares information.

Safety standards

This product has been designed to satisfy the

requirements of IEC61010-1:2010 3rd edition 'Safety

Requirements for Electrical Equipment for





EC Directive 89/336/EEC

Electrical – In order to meet the requirements of the EC



product must be used in an industrial environment.

End-of-life disposal

The controller contains a small lithium battery that

must be removed and disposed of responsibly in

accordance with local environmental regulations.

The remainder of the controller does not contain

any substance that causes undue harm to the

environment and must be disposed of in

accordance with the Directive on Waste Electrical

and Electronic Equipment (WEEE). It must not be

disposed of in Municipal Waste Collection.

6CONTROLMASTER CM30 & CM50 |PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C

…1 Health & Safety

…End-of-life disposal

ABB is committed to ensuring that the risk of any

environmental damage or pollution caused by any

of its products is minimized as far as possible. The

European Waste Electrical and Electronic

Equipment (WEEE) Directive that initially came into

force on 13 August 2005 aims to reduce the waste

arising from electrical and electronic equipment;

and improve the environmental performance of all

those involved in the life cycle of electrical and

electronic equipment.

In conformity with European local and national



above symbol may not be disposed of in European

public disposal systems after 12th August 2005.

Cleaning

The controller can be hosed down if it has been

installed to IP66/NEMA 4X standards. Warm water and

a mild detergent can be used.

Symbols

Symbols that appear on this product are shown below:

Protective earth (ground) terminal.

Both direct and alternating current supply.



potential hazard that could cause serious personal

injury and/or death. The user must refer to this

commissioning instruction for operation and/or

safety information.





and/or electrocution exists. Only individuals

qualified to work with hazardous voltages should

open the enclosure or remove the barrier.

Recycle separately from general waste under the

WEEE directive

CONTROLMASTER CM30 & CM50 | PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C 7

Restriction of Hazardous Substances (RoHS)

The European Union RoHS Directive and

subsequent regulations introduced in member

states and other countries limits the use of six

hazardous substances used in the manufacturing



monitoring and control instruments do not fall



ABB has taken the decision to adopt the

recommendations in the Directive as the target for

all future product design and component

purchasing.

8CONTROLMASTER CM30 & CM50 |PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C

2 Specification

Mechanical data

Protection

• Front face IP66/ NEMA 4X

• Rear panel IP20

CM30 dimensions

• Height – 97 mm (3.8 in)

• Width – 97 mm (3.8 in)

• Depth behind panel – 121 mm (4.8 in)

CM50 dimensions

• Height – 144 mm (5.6 in)

• Width – 76 mm (3.0 in)

• Depth behind panel – 123 mm (4.9 in)

Materials of construction

Glass filled polycarbonate

CM30 weight

0.5 kg (1.1 lb)

CM50 weight

0.58 kg (1.3 lb)

Electrical

Power supply ranges

• 100 to 240 V AC ±10 % (90 V min. to 264 V max.)

50/60 Hz

• 10 to 36 V DC (optional)

Power consumption

10 W max.

Analog inputs

Universal process inputs

Number 

Non-universal process inputs

Number 

CONTROLMASTER CM30 & CM50 | PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C 9

Outputs

Controls/retransmission outputs

Number 

Type Configurable as analog or digital pulse

Isolation Galvanically isolated from the rest of



Analog

range

0 to 20 mA programmable

Load 

Accuracy 0.25 % of output or ±10 µA

Relays

Number CM30: 

CM50: 

Type CM30: Standard with changeover

contacts

Optional contacts selectable as

NO or NC (by jumper)

CM50: Selectable as NO or NC (by jumper)

Contact

ratings



Update

rate

125 ms

10 CONTROLMASTER CM30 & CM50 |PROCESS CONTROLLERS, ¼ & ½ DIN | CI/CM30/50-EN REV. C

…2 Specification

Digital input/output

Number 

Type User-programmable as input or output

Minimum input pulse duration – 125 ms

Input Volt-free or 24 V DC

1-signal 15 to 30 V

0-signal –3 to 5 V

Conforms to IEC 61131-2

Output Open collector output



Conforms to IEC 61131-2

Update

rate

125 ms

Environmental data

Operating temperature range

0 to 55 °C (32 to 131 °F)

Operating humidity range

5 to 95 % RH (non-condensing)

Storage temperature range

–20 to 70 °C (–4 to 158 °F)

Approvals, certification & general safety

• EN-61010-1

• cULus

• 

inputs and outputs

• Pollution category 2

• Insulation category 2

Emissions and Immunity

Meets the requirements of IEC 61326 for an industrial

environment

3 Installation

• Locate the controller in a position where its

operating temperature and humidity limits will not

be exceeded and ensure that it is suitably protected



• Select a location away from strong electrical and

magnetic fields. If this is not possible (particularly in

applications where mobile communications





Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ABB Controller Handbücher

ABB

ABB AC 800M Bedienungsanleitung

ABB

ABB COM600 series Merkblatt

ABB

ABB 07CR41 Bedienungsanleitung

ABB

ABB ACS 800 Series Bedienungsanleitung

ABB

ABB MS132 Bedienungsanleitung

ABB

ABB PM564-R-AC Bedienungsanleitung

ABB

ABB PSTX470 Bedienungsanleitung

ABB

ABB ACS310 Bedienungsanleitung

ABB

ABB UMC100-FBP Stücklistenhandbuch

ABB

ABB COMMANDER C355 Bedienungsanleitung

ABB

ABB ISL-A 24 Bedienungsanleitung

ABB

ABB ACS255 Bedienungsanleitung

ABB

ABB MO132 Bedienungsanleitung

ABB

ABB i-bus KNX Bedienungsanleitung

ABB

ABB UMC22-FBP Stücklistenhandbuch

ABB

ABB i-bus KNX FCA/S 1.1M Bedienungsanleitung

ABB

ABB ACS880-07 Bedienungsanleitung

ABB

ABB Contrac PME120AI Bedienungsanleitung

ABB

ABB GPS2436 Bedienungsanleitung

ABB

ABB DSQC 667 Gebrauchsanweisung

ABB

ABB ACS580-07-0495A-4 Bedienungsanleitung

ABB

ABB TCC300 Bedienungsanleitung

ABB

ABB AC 010 Bedienungsanleitung

ABB

ABB TZIDC Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung