ABB Welcome M2300 Bedienungsanleitung

—

VER: 1.3 | 02.20.2017

ABB Welcome®

M2300

System controller

ABB Welcome®

— 2 —

Pos: 4 /Busch-Jaege r (Neustrukt ur)/Modul-Struktu r/Online-Doku mentation/Inhaltsve rzeichnis ( --> Für alle Dokumente <--)/In haltsverzeichnis @ 19\mod_13 20649044386_1 5.docx @ 109 653 @ @ 1

1 Safety ......................................................................................................... 3

2 Intended use ............................................................................................... 3

3 Environment ................................................................................................ 3

3.1 ABB devices ..................................................................................... 3

4 Operation .................................................................................................... 4

4.1 Control elements .............................................................................. 4

4.2 Operating modes .............................................................................. 5

5 Technical data ............................................................................................. 6

6 Mounting and installation ............................................................................. 7

6.1 Requirements for the electrician ........................................................ 7

6.2 General installation instructions ......................................................... 7

6.3 Mounting .......................................................................................... 8

ABB Welcome®

— 3 —

1 Safety

Warning

Electric voltage!

Direct or indirect contact with live components can cause dangerous

currents to flow through the body, which may result in electric shock,

burns or even death.

- Always disconnect the main power supply prior to installation and/or

disassembly.

- Work on the 110 V - 240 V supply system must be performed only

by qualified personnel.

2 Intended use

This device is an integral part of the ABB Welcome door communication system and operates exclusively with components from this

system.The device must only be installed on mounting rails according to DIN EN 500022.

3 Environment

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with

household waste.

– The device contains valuable raw materials that can be recycled

and should be disposed of at an appropriate recycling facility.

3.1 ABB devices

All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always dispose of the packaging

material, electric devices and their components via authorized recycling facilities or disposal companies.

ABB Welcome®

— 4 —

4 Operation

4.1 Control elements

Fig.

: Overview of control buttons

No.

Functions

Bus in or out

Operating mode settings

See chapter "Operating modes" for details.

Operating status indicating LED

- Ready for operation - Fault

Power supply

100~240V

ABB Welcome®

— 5 —

4.2 Operating modes

Fig.

“One on” mode:

When there is an incoming call, all indoor stations in the same apartment ring together,

but only the master indoor station switches on the screen.

“All on” mode:

When there is an incoming call, all indoor stations in the same apartment ring and switch

on their screens at the same time.

One on:

All on:

ABB Welcome®

— 6 —

5 Technical data

Designation

Value

Operating temperature

-13 °F to +131 °F

Storage temperature

-40 °F to +158 °F

Protection

IP 20

Single-wire clamps

2 x 22 AWG - 2 x 18 AWG

Fine-wire clamps

2 x 22 AWG - 2 x 18 AWG

Mains voltage

100 V - 240 V, 50/60 Hz, 1.0 A

Bus voltage

28 V ± 2 V DC, 1.2 A

Size

8 U

ABB Welcome®

— 7 —

6 Mounting and installation

Warning

Electric voltage!

Direct or indirect contact with live components can cause dangerous

currents to flow through the body, which may result in electric shock,

burns or even death.

- Always disconnect the main power supply prior to installation and/or

disassembly.

- Work on the 110 V - 240 V supply system must be performed only

by qualified personnel.

6.1 Requirements for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary qualifications.

- Incorrect installation endangers your life and that of the user of the

electrical system.

- Incorrect installation can cause serious damage to property, e.g.,

due to fire.

The minimum necessary expert knowledge and requirements for the

installation are as follows:

- Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect from power.

2. Secure against being re-connected.

3. Ensure there is no voltage.

4. Connect to earth.

5. Cover or barricade adjacent live parts.

- Wear suitable personal protective clothing.

- Use only suitable tools and measuring devices.

- Check the type of supply network (TN system, IT system, TT

system) to secure the following power supply conditions (classic

connection to ground, protective earthing, necessary additional

measures, etc.).

6.2 General installation instructions

- Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station, system device).

- Do not install the system controller directly next to the bell transformer or other power supplies (to avoid interference).

- Do not install the wires of the system bus together with 100 V - 240 V wires.

- Do not use common cables for the connecting wires of the door openers and wires

of the system bus.

- Avoid bridges between different cable types.

- Use only two wires for the system bus in a four-core or multi-core cable.

- When looping, never install the incoming and outgoing bus inside the same cable.

- Never install the internal and external bus inside the same cable.

ABB Welcome®

— 8 —

6.3 Mounting

The device M2300 must only be installed on mounting rails according to DIN EN 500022.

1SXU460062M0201, June 2018

—

ABB Inc.

Electrification Products

860 Ridge Lake Blvd.

Memphis, TN 38120

www.abb.com/door-entry-system-us

abbwelc[email protected].com

Customer Service: 800-816-7809

7:00 a.m. - 5:30 p.m., CST, Monday-Friday

elec_custserv@tnb.com

Technical Support: 888-385-1221, Option 1

7:00 a.m. - 5:00 p.m., CST, Monday-Friday

[email protected]m

—

We reserve the right to make technical

changes or modify the contents of this

document without prior notice. With regard

to purchase orders and/or contracts, the

agreed particulars shall prevail. ABB Inc.

does not accept any responsibility what-

soever for potential errors or possible lack

of information in this document.

We reserve all rights in this document and in

the subject matter and illustrations contained

therein. Any reproduction, disclosure to third

parties or utilization of its contents - in whole

or in parts - is forbidden without prior written

consent of ABB Inc.

Andere Handbücher für Welcome M2300

Inhaltsverzeichnis

Andere ABB Controller Handbücher

ABB

ABB i-bus EIB/KNX AA/S 4.1 Bedienungsanleitung

ABB

ABB Command Series Bedienungsanleitung

ABB

ABB PDP32.0 Bedienungsanleitung

ABB

ABB LME620-AI Original Betriebsanleitung

ABB

ABB MS116 Bedienungsanleitung

ABB

ABB ACQ80-04 Series Bedienungsanleitung

ABB

ABB Protronic 100 Bedienungsanleitung

ABB

ABB ACS880-01 Series Bedienungsanleitung

ABB

ABB IRC5 Compact Kurzanleitung

ABB

ABB ACQ80 Gebrauchs- und Pflegehandbuch

ABB

ABB i-bus KNX Room Master Premium RM/S 2.1 Bedienungsanleitung

ABB

ABB C360 Benutzerhandbuch

ABB

ABB ABILITY SSC600 Bedienungsanleitung

ABB

ABB CR307 Series Bedienungsanleitung

ABB

ABB DCS880 H1 Bedienungsanleitung

ABB

ABB NextMove e100 Bedienungsanleitung

ABB

ABB LME620-AI Bedienungsanleitung

ABB

ABB SA-M 16.2.2 Series Bedienungsanleitung

ABB

ABB Series Bedienungsanleitung

ABB

ABB DOL Starter Bedienungsanleitung

ABB

ABB FC/S 1.1 Bedienungsanleitung

ABB

ABB RHD16000 Series Bedienungsanleitung

ABB

ABB LME620-AI Bedienungsanleitung

ABB

ABB MS325 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung