2
Copyright
This document and parts thereof must not be
reproduced or copied without written permission
from ABB, and the contents thereof must not be
imparted to a third party, nor used for any
unauthorized purpose.
The software or hardware described in this
document is furnished under a license and may be
used, copied, or disclosed only in accordance with
the terms of such license.
Trademarks
ABB is a registered trademark of ABB Group.
All other brand or product names mentioned in
this document may be trademarks or registered
trademarks of their respective holders.
Warranty
The warranty conditions are defined in the
transaction related Terms and Conditions of the
Contract. Improper use, neglecting the necessary
maintenance or use outside the defined
application area will result in the warranty to
expire. The equipment can be opened by
authorized personnel only. If this practice is
not followed, the warranty expires.
Disclaimer
The data, examples and diagrams in this manual
are included solely for the concept or product
description and are not to be deemed as a
statement of guaranteed properties. All persons
responsible for applying the equipment
addressed in this manual must satisfy themselves
that each intended application is suitable and
acceptable, including that any applicable safety
or other operational requirements are complied
with. In particular, any risks in applications where
a system failure and/or product failure would
create a risk for harm to property or persons
(including but not limited to personal injuries
or death) shall be the sole responsibility of the
person or entity applying the equipment, and
those so responsible are hereby requested to
ensure that all measures are taken to exclude or
mitigate such risks. This product and its
accessories shall be assembled and used by
trained professionals only.
This document has been carefully checked by
ABB but deviations cannot be completely ruled
out. In case any errors are detected, the reader
is kindly requested to notify the manufacturer.
Other than under explicit contractual
commitments, in no event shall ABB be
responsible or liable for any loss or damage
resulting from the use of this manual or the
application of the equipment.
Conformity
This product is in conformity with the
following standards or normative documents:
DIN EN 60745-1, DIN EN 292 Part 1 and 2,
EN 294, EN 349, EN 60204-1, EN 28662-1,
EN 50081-1, EN 50082-2, EN 60529 in accordance
with the regulations of directives 98/37/EEC,
89/335/EEC.
