ABB VM3D Bedienungsanleitung
Commissioning instructions CI/VM3D-EN Rev. B
VM3D
Volumetric laser scanner
Measurement made easy
Volumetric laser scanner
Level products
Features
−Range up to 93 m (305 ft)
−Resolution 10 mm (0.39 po)
−Operating temperature –20°C to +50°C (–4°F to +122°F)
For more information
Complete specifications on the VM3D laser level transmitter
are available for free download from www.abb.com/level (see
links and reference numbers below) or by scanning this code:
Search for or click on:
Operating Instruction VM3D OI/VM3D-EN
Data Sheet VM3D DS/VM3D-EN
VM3D Safety Specifications SM/VM3D-EN-FR-DE
2 CI/VM3D-EN Rev B |VM3D Volumetric laser scanner
Read VM3D user manual carefully before working with the
product. For personal and system safety and for optimum
performance, make sure you thoroughly understand the
contents before installing, using or maintaining this instrument.
All servicing of the equipment is to be
performed at factory by qualified service
personnel only.
No user/operator adjustments inside the VM3D
volumetric laser scannerr are necessary or
recommended by the manufacturer.
−Do not drop the instrument or expose the internals to water
and dirt
−Do not open the terminal compartment in a possibly
explosive atmosphere
−Do not install or connect with the power on
−Use appropriate insulated lugs or ferrules with stainless
washers for connections
−Keep the terminal compartment seal clean and lightly
lubricated with Vaseline®
−Ensure that the terminal compartment lid, cable gland
or conduit are tight after installation
−Only use glands that have been suitably certified by a
notified body
−Do not install conduit so that it can drain into the VM3D
terminal compartment
−Remove dirt from the lenses with a clean, damp cloth only
−Aim perpendicular to liquids and avoid aiming into the
vessel fill path or at the sun
Standard precautions
Typical VM3D 24V DC electrical installation
Power
Indicator
Ethernet port
Scanning
indicator
24V DC Earth
Ext
Com Sig
VM3D Volumetric laser scanner |CI/VM3D-EN Rev B 3
VM3D Topology
The VM3D scanner uses a near infrared laser for distance
measurements. The VM3D scanner is classified as a class
1M laser device according to IEC60825-1, Ed 1.2, 2001-
08. Class 1M devices are considered eye safe and cannot
lead to eye injury unless an optical instrument that focuses
down the energy is used.
During standard operation:
Class 1M laser (905nm) is safe for all
conditions of use except when passed
through magnifying optics such as
microscopes and telescopes. Do not view
directly with optical instruments (binoculars or
telescopes).
Laser safety
C2 C3
C2 C3
C2 C3
C2 C3
C2
C3
C1
C1
C4
C4
Power cable, 115/230 VAC, 3 conductors, 14 AWG
Catagory 5e Ethernet Cable, stranded
shielded, 24 AWG, ≤ 100 m
Power cable, 24 Vdc,
3 conductors, shielded, 16 AWG, ≤ 100 m
RF cable, LMR400, N-type connectors
C1
C2
C3
C4
Power cable: 115/230 VAC, 3
conductors, 14 AWG
Category 5 Ethernet cable,
stranded, shielded, 24 AWG, ≤ 100
RF cable, LMR400, N-type
connectors
Power cable, 24 Vdc,
3 conductors, shielded, 16 AWG,
≤ 100 m
Antenna
VM3D Control Box
115/230 V.c.a.
Scanner
#1
Scanner
#2
Scanner
#3
Scanner
#4
Contact us
Note
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any
responsibility whatsoever for potential errors or
possible lack of information in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained therein.
Any reproduction, disclosure to third parties or
utilization of its contents - in whole or in parts –
is forbidden without prior written consent of ABB.
Copyright© 2014 ABB
All rights reserved
3KXL323002R4101
CI/VM3D-EN Rev. B 1.2014
Sales
Service
ABB Inc.
Process Automation
Analytical Measurement
585 Charest Blvd East, Suite 300
Quebec, Quebec G1K 9H4
Canada
For North America: +1 800 858 3847
For all other countries: +1 418 877
8111
e-mail: laserscanner[email protected].
com
ABB Inc.
Process Automation
18321 Swamp Road
Prairieville, LA 70769 USA
Phone: +1 225 673 6100
Service: +1 225 677 5836
Fax: +1 225 673 2525
ABB Limited
Process Automation
Howard Road
St. Neots
Cambridgeshire PE19 8EU
UK
Tel: +44 (0)1480 475321
Fax: +44 (0)1480 217948
ABB South Africa (Pty) Ltd
Process Automation
2 Lake Road
Longmeadow Business Estate (North)
Modderfontein 1609
Gauteng
South Africa
Tel: +27 10 202-5000
Fax: +27 11 579-8000
www.abb.com/level
ABB Limited
Process Automation
14 Mathura Road
P.O. Amar Nagar
Faridabad 121003
Haryana
India
Tel: +91 129 227 5591-92
Fax: +91 129 227 9692,
+91 129 227 5019
ABB Australia (Pty) Ltd
Process Automation
139 Coronation Drive, level 3
Milton
Queensland 4064
Australia
Tel: +61 7 3332 0711
Fax: +61 7 3332 0701
Andere ABB Industrieanlagen Handbücher
ABB
ABB REF601 CEI Stücklistenhandbuch
ABB
ABB HT563322 Bedienungsanleitung
ABB
ABB HT611934 Bedienungsanleitung
ABB
ABB HT843322 Bedienungsanleitung
ABB
ABB TPR56FV Series Bedienungsanleitung
ABB
ABB HT846516 Bedienungsanleitung
ABB
ABB Power2 340-H44 Bedienungsanleitung
ABB
ABB HT579088 Bedienungsanleitung
ABB
ABB HT567211 Bedienungsanleitung
ABB
ABB TPS44 -F Series Bedienungsanleitung
ABB
ABB TPS52 Series Bedienungsanleitung
ABB
ABB HT846969 Bedienungsanleitung
ABB
ABB HT846942 Bedienungsanleitung
ABB
ABB RELION REX640 Bedienungsanleitung
ABB
ABB HT568075 Bedienungsanleitung
ABB
ABB HT601672 Bedienungsanleitung
ABB
ABB RobotStudio 2022.1 Anleitung zur Verwendung
ABB
ABB HT600269 Bedienungsanleitung
ABB
ABB HT582497 Bedienungsanleitung
ABB
ABB HT578170 Bedienungsanleitung
