ABB XLP-BB Bedienungsanleitung
PRODUCT MANUAL
VMS - LV modular system
XLP-BB
2CDC508200D0111 Rev B
Contents
1 Icons.................................................................................................................................... 3
2 Material...............................................................................................................................4
2.1 Material - included............................................................................................................................. 4
2.2 Material - not included......................................................................................................................4
2.2.1 Accessories................................................................................................................................ 4
3 Assembly steps................................................................................................................. 5
Additional drawings and instructions can be found in the ABB Library:
2
1Icons
Icon Description
Warning / Caution
Note
Material - included
Material - not included
Tools
Tightening torque (Nm)
3
2Material
2.1Material - included
Box with busbar support and IP cover plate SKU-codes Description
4TBV853214C0100
4TBV853221C0100
4TBV853222C0100
4TBV853223C0100
4TBV853224C0100
4TBV853225C0100
4TBV853230C0100
4TBV853231C0100
4TBV853238C0100
4TBV853634C0100
VMS 32H w. 60mm BB 250/400A for DIN00
VMS 33 w. 60mm BB 250/400A for DIN00 /D
VMS 63H w. 60mm BB 250/400A for DIN00 /D
VMS 63V w. 60mm BB 250/400A for DIN00/D top
VMS 63V w. 60mm BB 250/400A for DIN00/D bot
VMS 63V w. 60mm BB 400A for DIN1 3p top
VMS 63V w. 60mm BB 400A for DIN1 3p bot
VMS 64V w. 60mm BB 400A for DIN1 3p top
VMS 64V w. 60mm BB 400A for DIN1 3p bot
VMS 43H w. 60mm BB 250/400A for DIN00 /D
2.2Material - not included
2.2.1Accessories
Nr. 1 Nr. 2
Nr. 3
Nr. 4 Nr. 5
Item nr. Accessory SKU Accessory Description
1 2CPX062374R9999 Reserve section cover - Z
2 4TBV854313C0100 Reserve section cover - flat
3 2CPX062952R9999 Front frame 1x XLP00
4 2CPX062953R9999 Front frame 2x XLP00
5 4TBV854306C0100 Trim frame VMS
4
3Assembly steps
1. Material: overview
1 VMS base
2 Cover
3 Cover screws (4)
4 Busbars
5 Front frame or Trim
frame
6 Bus-mounted fuse
base or Fuse switch
disconnector(s)
7 Reserve section cover
5
2. Remove IP cover plate and then the top part
of the busbar supports
1 Cover plate screws (4x)
2 IP cover plate
3 Busbar supports (2x)
3. Break "walls" and place blocks (where
necessary for busbars with thickness of 5
mm)
1 Busbar support "walls"
2 Busbar blocks
1
2
6
4. Place busbars and remount the busbar
supports
1 Busbars
2 Busbar supports
1
2
7
5. Mounting Bus-mounted fuse base on busbars
(A) or mounting Fuse Switch Disconnector on
busbars (B)
1 Bus-mounted fuse
base
2 Busbars
If copper width of PE or N =12 mm,
use the following configuration:
If copper width of PE or N >12 mm,
use the following configuration:
(remove side panels and break small
walls to obtain a 10 mm opening.)
See Installation Instruction of
fuse switch disconnectors on
how to open the device, enabling
connections of cables:
1 Fuse switch discon-
nector(s)
2 Busbars
1
2
A
XLP 00/1-A60/60...
XLP00
XLP1
1
2
B
8
6. Insert Frames and Cover plate
Insert the Trim frame VMS
in the IP cover plate and re-
install the assembly onto
the VMS box. Check first
needed width of trim frame
VMS and break off where
necessary.
1 Trim Frame
2 IP cover plate
3 Cover plate screws (4x)
First place front frame Xx XLP00
around device(s), then mount
reserve section cover - Z onto
the IP cover plate and reinstall
this assembly onto the VMS box.
1 Front frame
2 Reserve section cover - Z
3 IP cover plate
4 Cover plate screws (4x)
- When using 1x XLP00, use
Front frame 1x XLP00 and close
opening with adjusted Reserve
section covers - flat.
- When using 1x XLP1, no addi-
tional accessories are needed.
1 Reserve sections covers - flat
9
7. Fastening VMS box cover
1. Snap cover screws each time in the four corners.
2. Fit cover on box (one turn on screws, max. 2.5Nm).
3. If necessary, stick total isolation symbol on cover.
8. Installation complete
10
Inhaltsverzeichnis
Andere ABB Industrieanlagen Handbücher
ABB
ABB HT608117 Bedienungsanleitung
ABB
ABB HT566579 Bedienungsanleitung
ABB
ABB HT599244 Bedienungsanleitung
ABB
ABB HT577292 Bedienungsanleitung
ABB
ABB ACQ580-P Series Bedienungsanleitung
ABB
ABB HT847357 Bedienungsanleitung
ABB
ABB HT581681 Bedienungsanleitung
ABB
ABB MNS R Bedienungsanleitung
ABB
ABB SCC-S Bedienungsanleitung
ABB
ABB HT609942 Bedienungsanleitung
ABB
ABB HT568096 Bedienungsanleitung
ABB
ABB HT590018 Bedienungsanleitung
ABB
ABB HT574737 Bedienungsanleitung
ABB
ABB HT611935 Bedienungsanleitung
ABB
ABB HT610735 Bedienungsanleitung
ABB
ABB Relion SMU615 Bedienungsanleitung
ABB
ABB HT842972 Bedienungsanleitung
ABB
ABB HT593478 Bedienungsanleitung
ABB
ABB RELION REX640 Bedienungsanleitung
ABB
ABB HT844507 Bedienungsanleitung
