ABB EDS500 Series Bedienungsanleitung
Revision
Revision
Document identity: 1KGT151042V000 1
Revision: Date: Changes:
0 08/2019 Initial version
2 1KGT151042 V0001
Contents
Contents
1 Introduction..............................................................................................................................5
1.1 About the Manual EDS500 series - FSK modems......................................................... 5
1.2 References..............................................................................................................................5
2 Safety instructions..................................................................................................................7
2.1 Introduction........................................................................................................................... 7
2.2 Safety indication symbols.................................................................................................. 7
2.3 Applicable standards and directives for installation and operation......................... 8
2.4 Qualified personnel..............................................................................................................9
2.5 Intended use..........................................................................................................................9
2.6 Warnings and cautions....................................................................................................... 9
3 System concept......................................................................................................................11
3.1 Device family........................................................................................................................11
3.2 Functions overview.............................................................................................................12
3.2.1 Applications........................................................................................................12
3.2.2 Connectivity........................................................................................................12
3.2.3 Modulation..........................................................................................................12
3.2.4 Multi-channel...................................................................................................... 12
3.2.5 RTU560 integration.......................................................................................... 13
3.3 Network structures............................................................................................................ 13
3.3.1 Line topology..................................................................................................... 13
3.3.2 Point-to-point topology...................................................................................13
3.3.3 Star topology..................................................................................................... 14
3.3.4 Multidrop star topology.................................................................................. 15
4 Device description.................................................................................................................17
4.1 Compact device 500FSD10...............................................................................................17
4.1.1 Overview 500FSD10..........................................................................................17
4.1.2 Front view and connectors 500FSD10.......................................................... 17
4.1.3 Device data 500FSD10..................................................................................... 17
4.2 Compact device 500FSD11...............................................................................................18
4.2.1 Overview 500FSD11.......................................................................................... 18
4.2.2 Front view and connectors 500FSD11.......................................................... 19
4.2.3 Device data 500FSD11......................................................................................19
4.3 Compact device 500FSD20..............................................................................................20
4.3.1 Overview 500FSD20......................................................................................... 20
4.3.2 Front view and connectors 500FSD20.........................................................20
4.3.3 Device data 500FSD20.....................................................................................21
4.4 General data.........................................................................................................................21
4.5 Connections.........................................................................................................................23
4.5.1 Power connector (X1).......................................................................................23
4.5.2 Serial interface to DTE (X2)............................................................................ 24
4.5.3 Interface to transmission line (X3)................................................................25
1KGT151042 V0001 3
Contents
4.5.4 Alarm relay (X4).................................................................................................26
4.5.5 Serial interface for configuration (Con0).....................................................27
4.5.6 Extension interface (EXT)................................................................................27
4.6 Display elements................................................................................................................ 28
4.7 Controls................................................................................................................................ 28
4.7.1 Reset button...................................................................................................... 28
4.8 Maintenance........................................................................................................................ 29
5 Glossary...................................................................................................................................31
4 1KGT151042 V0001
Introduction About the Manual EDS500 series - FSK modems
1 Introduction
1.1 About the Manual EDS500 series - FSK modems
The Manual consists of several parts:
Document identity Part name Explanation
1KGT151042 Part 1: Devices Description of the device portfolio
1KGT151043 Part 2: Functions Description of the functions
1KGT151044 Part 3: Command reference Description of the command line
interface
Table 1: Parts of the Manual EDS500 series - FSK modems
1.2 References
[1] Individual Ident EDS500 series
Hardware data
sheets
Individual hardware data sheets of all
devices and auxiliary equipment
[2] Individual Ident EDS500 series
Operating
instructions
Individual operating instructions of all
devices and auxiliary equipment
1KGT151042 V0001 5
References Introduction
6 1KGT151042 V0001
Safety instructions Introduction
2 Safety instructions
2.1 Introduction
Read the following chapter before mounting and commissioning a system or device of the
EDS500 series.
2.2 Safety indication symbols
The following safety indication symbols are used in this documentation:
DANGER
Hazardous situation which, if not avoided, will result in death or serious injury of the
operating personnel. The provided information is necessary to know, if you configure a
EDS500 seriesdevice. The safety indication informs about a restriction etc.
WARNING
Hazardous situation which, if not avoided, could result in death or serious injury of
operating personnel.
CAUTION
Hazardous situation, which, if not avoided, could result in minor or moderate injury.
ADVICE
Important information not related to personal injury but that should be observed. This
symbol is used to indicate restrictions, prerequisites, and other information that is
important for configuration.
The following safety indication symbols are used on EDS500 series devices:
Symbol Type Level of danger
Warning Hazardous situation, read documentation (data sheets and
operating instructions)
Advice Protection class II equipment (IEC 61140):
•double insulated and
•with functional earthing.
Table 2: Safety indication symbols on EDS500 series devices
1KGT151042 V0001 7
Applicable standards and directives for installation and oper-
ation
Safety instructions
2.3 Applicable standards and directives for
installation and operation
The devices of the Hitachi ABB Power Grids EDS500 series are produced in compliance with
the relevant regulations and standards.
According to IEC 60664-1 (DIN VDE 0110-1) Insulation coordination for equipment within low-
voltage systems – Part 1: Principles, requirements and tests, classification of the EDS500
series is as follows:
•Pollution degree 2
Only non-conductive pollution occurs except that occasionally a temporary conductivity
caused by condensation is to be expected.
•Overvoltage category II
in accordance with the definitions in IEC 60364-4-44
The owner of the devices and components is responsible to ensure that they are installed
safely and in compliance with the applicable local laws and regulations.
Standard Explanation
DIN VDE 0100 Erection of power installations with nominal voltages up to
1000 V AC or 1500 V DC
EN 50274 (DIN VDE 0660-514) Low-voltage switchgear and controlgear assemblies
Protection against electric shock - Protection against unin-
tentional direct contact with hazardous live parts
IEC/EN 60204 (DIN VDE 0113) Safety of machinery; Electrical equipment of machines
Part 1: General requirements
EN 50178 (DIN VDE 0160) Electronic equipment for use in electrical power installations
and their assembly into electrical power installations
EN 50310 (DIN VDE
0800-2-310)
Application of equipotential bonding and earthing in build-
ings with information technology equipment
Table 3: Standards
Mounting into cubical is mandatory due to fire protection.
If devices of the EDS500 series are coupled with or supplied through power-frequency
voltage networks of overvoltage category III, take suitable protective action, such as
installing surge voltage protectors, to guarantee that overvoltage category II (1500 V max.
transient) according to DIN VDE 0110 applies at the terminal connectors. The secondary
circuit should be connected to protective terminal.
WARNING
For detailed installation instructions of the individual devices refer to the respective
operating instructions.
8 1KGT151042 V0001
Safety instructions Qualified personnel
2.4 Qualified personnel
DANGER
The connectors or terminals of some components of the EDS500 series may conduct
dangerous contact voltages.
Touching parts with live current will result in death or serious injury.
Installation, commissioning and maintenance of such systems must be carried out only by
qualified personnel with knowledge of the following information:
•Dealing with dangerous voltages
•Application of the relevant specifications, standards, and regulations, in particular of
the applicable EN (VDE) standards and occupational safety regulations aiming at the
prevention of accidents
2.5 Intended use
The EDS500 series was developed, manufactured, tested, and documented observing the
relevant standards.
If the applicable regulations for installation, commissioning, and maintenance are observed,
the product does not pose a danger to health, life, safety, or property under normal
circumstances.
"Intended use of the product" means that the components of the EDS500 series are operated
and maintained exclusively in the form described in the product documentation. In particular,
intended use of the product requires observing the technical specifications of the process
circuits and power supply.
Hitachi ABB Power Grids does not accept any responsibility whatsoever for injury or damage
resulting from improper use or unauthorized repair.
2.6 Warnings and cautions
DANGER
Interrupt the power supply before mounting or dismounting the device.
WARNING
An easy to access manual interrupter has to be installed into the power feed of the modem
to be able to disconnect the modem from the power supply in the case of an emergency.
WARNING
The EDS500 devices are intended only for use in restricted access area without access
for children or ordinary persons. For fire protection the devices have to be mounted into
suitable cubicles which are certified for the function of a fire protection housing.
1KGT151042 V0001 9
Warnings and cautions Safety instructions
WARNING
The device shall be powered off while accessing any of the connectors X1 (power
connector)or X4 (alarm relay). Any other connectors (e.g. RS-232or 4-wire/2-wire
communication port/X3) are hot-pluggable while the device is operating.
WARNING
No plug shall be freely accessible in normal operation due to safety reasons.
WARNING
Connect the device only if you can make sure that the specifications are kept.
ADVICE
Electronic components are sensitive for electrostatic discharge.
To prevent damages to your devices deviate possibly occurring static charges before
touching the module or components. We recommend to wear a conductive grounded wrist
tape.
10 1KGT151042 V0001
Andere Handbücher für EDS500 Series
7
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere ABB Modem Handbücher
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung