ABB CP410 Bedienungsanleitung

CP410

Installation and Operation Manual

ABB, 1SBC159101M0201 2007-05 English

Cover_MAEN857.fm Page 1 Monday, April 2, 2007 11:17 AM

Foreword

ABB, 1SBC159101M0201

CP410 Installation and Operation Manual

Foreword

CP410 is a Human Machine Interface (HMI) with a 3" STN Liquid Crystal

Display, and is water- and dust-resistant according to IP65/NEMA4.

CP410 is CE-marked and meets your need to be highly transient-resistant while

in operation.

Also, its compact design makes connections with other machinery more flexible,

thus achieving the optimal performance of your machines.

CP400Soft is used to design applications of CP410; it is reliable, user-

friendly and compatible with many models.

Release: May 2007

Document number: ABB, 1SBC159101M0201

Please read the entire installation manual prior to installing and using this equipment.

Only qualified personnel may install, operate or repair this equipment. ABB is not responsible for modified,

altered or renovated equipment.

Because the equipment has a wide range of applications, users must acquire the appropriate knowledge to

use the equipment properly in their specific applications.

Only parts and accessories manufactured according to specifications set by ABB may be used.

ABB SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE INSTALLATION, USE OR

REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE.

BUYER'S SOLE REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF PUR-

CHASE PRICE, AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE

DISCRETION OF ABB.

Contents

ABB, 1SBC159101M0201

Contents

1 Safety Precautions................................................................................... 5

2 Installation.............................................................................................. 7

2.1 Package Contents.........................................................................7

3 Product Specifications............................................................................. 8

3.1 Description of Parts .....................................................................9

3.2 External and Cut-out Dimensions .............................................10

3.3 Mounting Procedure..................................................................10

3.4 Grounding .................................................................................12

3.5 Power Supply and Wiring ..........................................................12

4 Dip Switches......................................................................................... 13

5 Communication Port............................................................................ 14

6 LCD Contrast Adjustment ................................................................... 14

7 Operation ............................................................................................. 15

7.1 Self Test .....................................................................................15

7.2 System Menu .............................................................................16

7.3 Key Pad......................................................................................17

7.4 Bench and Function Tests ..........................................................18

7.5 Setting Parameters......................................................................18

7.6 Downloading an Application .....................................................19

7.7 Uploading an Application ..........................................................20

7.8 Copying an Application.............................................................21

7.9 Passwords...................................................................................22

Contents

ABB, 1SBC159101M0201

Safety Precautions

ABB, 1SBC159101M0201 5

1 Safety Precautions

Both the installer and the owner and/or operator of the operator terminal must

read and understand this installation manual.

General

– Only qualified personnel may install or operate the operator terminal.

– The operator terminal must be installed according to the installation instruc-

tions.

– The operator terminal is designed for stationary installation on a plane surface,

where the following conditions are fulfilled:

• no high explosive risks

• no strong magnetic fields

• no direct sunlight

• no large, sudden temperature changes

– Never allow fluids, metal filings or wiring debris to enter any openings in the

operator terminal. This may cause fire or electrical shock.

– The operator terminal fulfills the requirements of article 4 of EMC directive

89/336/EEC.

– Storing the operator terminal where the temperature is lower/higher than

recommended in this manual can cause the LCD display liquid to congeal/

become isotopic.

– The LCD display liquid contains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open, flush with plenty of water and get medical attention.

– The supplier is not responsible for modified, altered or reconstructed equip-

ment.

– Use only parts and accessories manufactured according to specifications of the

supplier.

– Peripheral equipment must be appropriate for the application and location.

– The figures in this manual serves an illustrative purpose. Because of the many

variables associated with any particular installation, the supplier cannot as-

sume responsibility for actual use based on the figures.

– The supplier neither guarantees that the operator terminal is suitable for your

particular application, nor assumes responsibility for your product design, in-

stallation or operation.

Safety Precautions

6ABB, 1SBC159101M0201

Power source

– The operator terminal is equipped with a 24 V DC input. Supply power other

than 24 V DC ± 15% will severely damage the operator terminal. Thus, check

the power supply supporting the DC power regularly.

Grounding

– Without grounding, the operator terminal may be severely affected by excess

noise. Make sure that the grounding is done properly from the power connec-

tor at the rear side of the operator terminal. When power is connected, make

sure that the wire is grounded.

– Use a cable of at least 2 mm2(AWG 14) to ground the operator terminal.

Ground resistance must be less than 100 Ω (class3). Note that the ground

cable must not be connected to the same ground point as the power circuit.

Installation

– Communication cables must be separated from power cables for operational

circuits. Only use shielded cables to avoid unpredictable problems.

During Use

– Emergency stop and other safety functions may not be controlled from the

operator terminal.

– Do not use too much force or sharp objects when touching the keys, display

etc.

Service and Maintenance

– Only qualified personnel should carry out repairs.

– The agreed warranty applies.

– Before carrying out any cleaning or maintenance operations, disconnect the

equipment from the electrical supply.

– Clean the display and surrounding front cover with a soft cloth and mild

detergent.

Dismantling and Scrapping

– The operator terminal or parts thereof shall be recycled according to local

regulations.

– The following components contain substances that might be hazardous to

health and the environment: lithium battery, electrolytic capacitor and

display.

Installation

ABB, 1SBC159101M0201 7

2Installation

2.1 Package Contents

The following parts are found in the box:

– Operator terminal CP410

– 4 installation fasteners

– Power connector (connected to the 24 V DC power outlet)

– This installation and operation manual (1SBC159101M0201)

CP410

Product Specifications

8ABB, 1SBC159101M0201

3Product Specifications

Parameter CP410

Front panel, W x H x D 173.0 x 105.5 x 5.8 mm

Mounting depth 51.8 mm

Cut-out dimensions 160.8 x 93.3 mm

Front panel protection IP 65/NEMA 4

Keypad specifications 16 mechanical switches. Lifetime of each switch is

over 500,000 activations. Membrane overlay is

resistant to most solvents and chemicals.

Reverse side material Powder-coated aluminum

Weight 0.65 kg

Communication ports RS232/RS422/RS485

Flash ROM 4 MB

RAM 128 KB

CPU 32-bit RISC

Battery backed memory No

Real time clock Yes

Display Mono STN LCD.160 x 80 pixels, black/white with 16

gray levels.

Yellow-green LED backlight lifetime: approximately

75,000 h.

Active area of display,

W x H

65 x 35 mm.

20 x 10 characters of 8 x 8 size can be displayed.

Contrast adjustment Contrast adjustable by potentiometer on the back.

Power supply 24 V DC ± 15% (or 20 - 28 V DC). Less than 8 W.

Operating temperature 0 ° to +50 °C

Storage temperature -10 °to +60 °C

Ambient humidity 20 - 90% RH non-condensed

Vibration endurance 0.5 mm displacement, 10-55 Hz, 2 hours per X-, Y-

and Z-axis directions

Shock endurance 10 G, 11 ms 3 times in each direction of X-, Y- and Z-

axes

Product Specifications

ABB, 1SBC159101M0201 9

3.1 Description of Parts

Front

Back

RF Emissions CISPR 22, Class A

Electrostatic Discharge IEC61000-4-2

RF Susceptibility IEC61000-4-3

High Frequency Transients IEC61000-4-4

Cooling Natural cooling

Parameter CP410

CP410

Fixture mounting holes

Power lamp

Communication lamp

Function and numerical keys

Display

DIP switches (1-10)

Contrast adjustment

COM2: RS232/RS422/RS485

DC power outlet

Product Specifications

10 ABB, 1SBC159101M0201

3.2 External and Cut-out Dimensions

3.3 Mounting Procedure

1. Cut out the control front panel to match the dimensions (mm) below.

CP410

CUTOUT DIMENSION

UNIT: mm

CP410

CUTOUT DIMENSION

Inhaltsverzeichnis

Andere ABB Touch-Terminal Handbücher

ABB

ABB REL 551 2.5 Bedienungsanleitung

ABB

ABB REF 541 Bedienungsanleitung

ABB

ABB SPAC 315 C Stücklistenhandbuch

ABB

ABB SACE Tmax T7D/PV Bedienungsanleitung

ABB

ABB SPAC 536 C Bedienungsanleitung

ABB

ABB REL 561*2.5 Bedienungsanleitung

ABB

ABB REL 551-C1*2.5 Produkthandbuch

ABB

ABB RET 54 Series Gebrauchs- und Pflegehandbuch

ABB

ABB RE 54 Bedienungsanleitung

ABB

ABB REF 54 Series Gebrauchs- und Pflegehandbuch

ABB

ABB SACE Tmax XT Bedienungsanleitung

ABB

ABB REF 541 Bedienungsanleitung

ABB

ABB ETL600 Bedienungsanleitung

ABB

ABB SPAC 531 C Stücklistenhandbuch

ABB

ABB Welcome M25102 C Series Bedienungsanleitung

ABB

ABB SPAC 310 C Stücklistenhandbuch

ABB

ABB REB 551-C4 2.5 Series Bedienungsanleitung

ABB

ABB REL 551-C1 2.3 Series Leitfaden

ABB

ABB REF 54 Series Produkthandbuch

ABB

ABB REF 54 Series Bedienungsanleitung

ABB

ABB REB 551-C3*2.5 Leitfaden

ABB

ABB REC 561 Bedienungsanleitung

ABB

ABB REM 54 Series Produkthandbuch

ABB

ABB Unifix AD 1STQ004320B0000 Handbuch

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung