ABB PowerValue 11 RT Bedienungsanleitung



l�

un I Jet

, 

ИБП ABB Powervalue 11 RT (6-10 кВА) - руководство по эксплуатации. Юниджет

Постоянная ссылка на страницу: https://www.uni-jet.com/catalog/istochniki-

besperebojnogo-pitaniya/on-line-ibp-1-kva-10kva/abb-powervalue-11-rt.html

PowerValue 11 RT

6-10 kVA

User manual

2 PowerValue 11 RT 6-10kVA | User manual

The UPS system operates with mains, battery or bypass

power. It contains components that carry high currents

and voltages. When installed correctly, the UPS system is

grounded to earth and IP 20 rated against electrical shock

and foreign objects.

This user manual contains guidelines to check delivery, install

and commission the UPS and is intended for people who

plan the installation, install, commission and use or service

the UPS. The reader is expected to be familiar with the

fundamentals of electricity, wiring, electrical components and

electrical schematic symbols.

Symbols

The following symbols are used in this user manual.

WARNING

WARNING INDICATES THE PRESENCE OF A HAZARD

WHICH COULD RESULT IN SEVERE INJURY AND/OR

SERIOUS DAMAGE TO THE SYSTEM

CAUTION

CAUTION INDICATES THE PRESENCE OF A HAZARD

WHICH COULD RESULT IN MINOR INJURY AND/OR

DAMAGE TO THE PRODUCT.

NOTE NOTE INDICATES THE PRESENCE OF A HAZARD

WHICH COULD LEAD TO PROPERTY DAMAGE.

SAFETY WARNING: THE SYMBOL IS USED TO ALERT

THE USER TO WARNINGS, CAUTIONS AND NOTES.

DANGER: THE SYMBOL IS USED TO ALERT THE USER

TO THE OCCURRENCE OF ELECTRICAL LIVE PARTS

WITH HAZARDOUS VOLTAGES.

Protective grounding terminal: A terminal which must be

connected to earth ground prior to making any other

connections to the equipment.

A terminal to which or from which an alternating current

or voltage (AC) may be applied or supplied.

A terminal to which or from which a direct current or

voltage (DC) may be applied or supplied

Battery

Power On, Idle or shutdown the UPS

Overload indication

Recycle

Do not dispose with ordinary trash

About this manual

FOLLOW THE INSTRUCTIONS IN THIS MANUAL DURING

INSTALLATION, OPERATION AND MAINTENANCE OF THE UPS

AND BATTERIES.

FAILURE TO FOLLOW THE INSTRUCTIONS MAY LEAD TO THE

PRODUCT LOSING ITS WARRANTY.

Read this manual before performing any operations and store

it for future reference.

User manual | PowerValue 11 RT 6-10kVA 3

Contents

1 Safety instructions 5

1.1 Operator precautions 5

1.2 Environmental Considerations 5

1.5 Operation 6

1.3 Declaration of Safety conformity and CE marking 6

1.4 Inquiries 6

2 Maintenance 7

3 Installation 8

3.1 Delivery, transportation, positioning and storage 8

3.2 Site planning and positioning 8

3.3 General characteristics 12

3.4 Electrical installation 14

3.5 Initial startup 20

3.6 Emergency power off (EPO) 20

3.7 Paralleling the units 21

3.8 Installation Checklist 24

4 Operation 25

4.1 Control Panel 25

4.2 Operating Mode 26

4.3 UPS start-up and shutdown 28

4.4 Display operation 29

5 Communication 35

5.1 RS-232 port 35

5.2 USB port 35

5.3 Network management card (Optional) 36

6 Troubleshooting 37

6.1 Fault identification and rectification 37

6.2 Accessing Alarms 37

Appendix A 41

Appendix B 42

Appendix C: External Battery Modules (EBM) value calculation 43

4 PowerValue 11 RT 6-10kVA | User manual

User manual | PowerValue 11 RT 6-10kVA 5

1.1 Operator precautions

Always follow the precautions and instructions described in

this manual. Any deviations from the instructions may result in

electrical shock or cause accidental load loss.

Only the following user operations are permitted:

• Use of the LCD control panel (LCD Display) and

Maintenance Bypass (if present)

• Start up and shut down of the UPS (excluding the

commissioning start up)

• Operation of additional connectivity devices

ABB DOES NOT TAKE ANY RESPONSIBILITY FOR DAMAGES

CAUSED THROUGH INCORRECT MANIPULATIONS OF THE

UPS SYSTEM.

DANGER DO NOT REMOVE ANY SCREWS FROM THE UPS

SYSTEM OR FROM THE BATTERY CABINET:

DANGER OF ELECTRICAL SHOCK.

WARNING

DANGER HIGH FAULT CURRENTS (LEAKAGE CURRENTS).

BEFORE CONNECTING THE MAINS ENSURE THAT

THE UPS IS GROUND!

WARNING

DANGER

DISPLAY A WARNING LABEL ON ALL PRIMARY

POWER ISOLATORS INSTALLED REMOTE FROM

THE UPS AREA TO WARN ELECTRICAL

MAINTENANCE PERSONNELS THAT THE CIRCUIT

FEEDS A UPS.

MAKE SURE THAT WARNING LABEL CONTAINS

THE FOLLOWING TEXT OR EQUIVALENT:

“ISOLATE THE UPS (UNINTERRUPTIBLE POWER

SUPPLY) BEFORE WORKING ON THIS CIRCUIT.”

WARNING

1 Safety instructions

1.2 Environmental Considerations

To operate the UPS with optimal efficiency, your installation

site should meet the environmental parameters outlined in

this user manual. Excessive amount of dust or moisture in

the operating environment may cause damage or lead to

malfunction. The UPS should always be protected from the

weather and sunshine. The operating environment must meet

the weight, airflow, size and clearance requirements specified

in the technical datasheet.

Under no circumstances install the UPS in an airtight room,

in the presence of flammable gases, or in an environment

exceeding the environmental requirements specified below.

An ambient temperature of +20°C to +25°C is recommended

to achieve a long life of the UPS and batteries. The cooling air

entering the UPS must not exceed +40 °C and the humidity

should be below 95% (non-condensing).

6 PowerValue 11 RT 6-10kVA | User manual

1.5 Operation

CAUTION

DO NOT DISCONNECT THE MAINS CABLE FROM

THE UPS OR THE BUILDING WIRING SOCKET

DURING OPERATION AS THIS REMOVES THE

GROUND FROM THE UPS AND ALL CONNECTED

LOADS.

NOTE

PRESS THE OFF BUTTON TO FULLY DISCONNECT

THE UPS. WAIT UNTIL THE UPS IS ON BYPASS OR

ON STAND-BY MODE BEFORE DISCONNECTING IT

FROM THE MAINS.

NOTE

TO REDUCE THE RISK OF FIRE, CONNECT THE

UPS TO A CIRCUIT PROVIDED WITH BRANCH

CIRCUIT OVERCURRENT PROTECTION WITH AN

AMPERE RATING IN ACCORDANCE WITH THE

IEC/EN 60934 STANDARD OR YOUR LOCAL

ELECTRICAL CODE.

SEE TECHNICAL SPECIFICATIONS FOR

RECOMMENDATIONS.

NOTE

INDISCRIMINATE OPERATION OF SWITCHES MAY

CAUSE OUTPUT LOSS OR DAMAGE TO

EQUIPMENT.

This UPS can be connected to a maximum of four external

battery enclosures.

WARNING

NEVER DISPOSE BATTERIES ON FIRE AS THEY

MAY EXPLODE.

WARNING

DO NOT OPEN OR MUTILATE THE BATTERIES.

WARNING

RELEASED ELECTROLYTE IS HARMFUL TO THE

SKIN AND EYES.

1.3 Declaration of Safety conformity

and CE marking

PowerValue 11 RT 6-10 kVA is designed, manufactured

and commercialized in accordance with the standard

ENISO9001 of Quality Management Systems.

These products are in conformity with the directives:

– 2014/35/EU Low voltage directive

– 2014/30/EU Electromagnetic Compatibility

directive (EMC)

– 2011/65/EU Restriction of the use of certain

hazardous substances (RoHS) directive

and with the following product standards:

Product Standards

Safety IEC/EN 62040-1:2008+A1:2013

EMC IEC/EN 62040-2:2006

RoHS IEC/EN50581:2012

Table 1: Standards

1.4 Inquiries

Address inquiries about the UPS to the local ABB office

or agent authorized by ABB. Note the type code and

the serial number of the equipment before contacting

ABB or authorized agent. The serial number is shown in

the nameplate of the product. For further information on

troubleshooting, see Chapter 6.

User manual | PowerValue 11 RT 6-10kVA 7

PowerValue 11 RT 6-10 kVA UPS only requires minimal

maintenance.

Charge the UPS regularly to maximize the expected life

of the battery. When connected to the mains power, the

UPS charges the batteries and prevents the batteries from

overcharging and over-discharging.

• Replace the batteries when the battery service life has

been exceeded (3~5 years at 25°C ambient temperature).

Contact local ABB or an agent authorized by ABB.

• Charge the UPS once every 4 to 6 months if it has not

been used for a long time.

• In high temperature regions, charge and discharge the

battery every 2 months. The standard charging time should

be of at least 12 hours.

• Replace the battery when the discharge time is less than

50% of specified after full charge. Check the battery

connection or contact your local dealer to order a new

battery.

DANGER COMPONENTS INSIDE THE UPS ARE CONNECTED

TO THE BATTERY EVEN WHEN THE UPS IS

DISCONNECTED FROM THE MAINS POWER

SUPPLY.

WARNING

DANGER

DISCONNECT THE BATTERIES BEFORE CARRYING

OUT ANY KIND OF SERVICE AND/OR

MAINTENANCE. VERIFY THAT NO CURRENT IS

PRESENT AND NO HAZARDOUS VOLTAGE EXISTS

IN THE CAPACITOR OR BUS CAPACITOR

TERMINALS.

WARNING

DANGER

THE BATTERY CIRCUIT IS NOT ISOLATED FROM

THE INPUT VOLTAGE. HAZARDOUS VOLTAGES

MAY OCCUR BETWEEN THE BATTERY

TERMINALS AND THE GROUND. VERIFY THAT NO

VOLTAGE IS PRESENT BEFORE SERVICING.

WARNING

2 Maintenance

DANGER

A BATTERY CAN PRESENT A RISK OF

ELECTRICAL SHOCK AND HIGH SHORT CIRCUIT

CURRENT. THE FOLLOWING PRECAUTIONS

SHOULD BE OBSERVED WHEN WORKING ON

BATTERIES:

• REMOVE WATCHES, RINGS OR OTHER METAL

OBJECTS

• MAKE USE OF PROPER PPE (PERSONAL

PROTECTION EQUIPMENT) AS PER LOCAL

POLICIES AND RULES

- WEAR FLAME/ARC RESISTANT WHOLE BODY

CLOTHING

- WEAR SUITABLE VOLTAGE RATED GLOVES

- USE SAFETY DIELECTRIC FOOTWEAR

- WEAR ARC FLASH FACE SHIELD

- USE VOLTAGE RATED TOOLS

• DO NOT LAY TOOLS OR METAL PARTS ON TOP

OF BATTERIES

• DISCONNECT THE CHARGING SOURCE PRIOR

TO CONNECTING OR DISCONNECTING

BATTERY TERMINALS.

WARNING

CAUTION

REPLACE BATTERIES WITH THE SAME NUMBER

AND SAME TYPE OF BATTERIES.

CAUTION

REPLACE FUSES ONLY BY DEVICES OF THE

SAME TYPE AND OF THE SAME AMPERAGE TO

AVOID FIRE HAZARDS.

8 PowerValue 11 RT 6-10kVA | User manual

3.1 Delivery, transportation,

positioning and storage

3.1.1 Receipt of the UPS and visual inspection

When receiving the UPS, carefully examine the packing

container and the UPS for any signs of physical damage. In

case of damage, notify the carrier immediately.

The packing container of the UPS protects it from mechanical

and environmental damage. To increase the protection, the

UPS is wrapped in a plastic sheet. Keep the packaging for

later re-use.

3.1.2 Unpacking list

After examining the package, open the carton box and check

the following items are included:

– 1 x User manual

– 2 x UPS stands (support)

– 4 x M4 round screw (UPS stands)

– 1 x IEC C13-C14 cable

– 1 x monitoring software CD

– 1 x 15-pin communication cable (for parallel systems)

– 1 x USB cable

Rack mounting accessories (full rack mounting kit to purchase

separately):

– 2 x 90° rack mounting brackets

– 4 x M6 clip nuts

– 12 x M6 screws

– 4 x M4 screws

Examine the UPS for any signs of damage and ensure that

the received UPS corresponds to the material indicated in the

delivery note. Notify your carrier or supplier immediately in

case of any damage.

3.1.3 Storage of UPS

If you plan to store the UPS prior to use, keep the UPS in a

dry, clean and cool storage room with an ambient temperature

between (-15 °C to +60°C) and humidity of less than 95%

non-condensing. If the packing container has been removed,

protect the UPS from dust. Keep the UPS always in upright

position and do not drop the equipment.

3 Installation

3.2 Site planning and positioning

3.2.1 Planning before the installation

Install the unit to a position where any danger to the UPS is

minimized to ensure a long service life:

• Install the UPS indoors.

• Leave 50cm of space on each side of the cabinet to enable

cooling airflow and ensure that the circulation of air to the

ventilation slits is not obstructed.

• Avoid excessively high temperature and excessive

moisture.

• Make sure that the surface is solid and flat.

3.2.2 Positioning

PowerValue 11 RT can be mounted in a rack or installed as a

standalone configuration.

WARNING

WATER CONDENSING MAY OCCUR IF THE UPS IS

UNPACKED IN A VERY LOW TEMPERATURE. IN

THIS CASE IT IS NECESSARY TO WAIT UNTIL THE

UPS IS FULLY DRIED INSIDE OUT BEFORE

PROCEEDING INSTALLATION AND USE TO AVOID

HAZARDS AND ELECTRIC SHOCK, WAIT UNTIL

THE UPS IS FULLY DRY BOTH INSIDE AND

OUTSIDE BEFORE INSTALLING.

User manual | PowerValue 11 RT 6-10kVA 9

3.2.3 Rack mount installation

Note that you need a rack mounting kit (purchased separately)

for this operation.

To install the UPS to a rack:

1. Identify the rail holes in the rack for positioning the

cabinet. Position the rails in the bottom of the 3U space

for 6kVA units and 5U space for 10kVA units.

2. Slide the cabinet into the rack as shown in Figure 1.

Figure 1: Rack mount installation

If installing additional UPS units, repeat the steps above for

each cabinet.

3.2.2.1 Connecting the external battery modules

PowerValue 11 RT 6kVA

To connect the external battery modules:

1. Remove the front panels of the UPS and of the external

battery modules.

2. Plug the external battery enclosure cable into the UPS

battery connector as shown in Figure 2.

3. Position and screw on the UPS and the battery module

front panels.

Figure 2: Battery module connections

Andere Handbücher für PowerValue 11 RT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ABB UPS Handbücher

ABB

ABB TLE 625 Series Bedienungsanleitung

ABB

ABB PowerValue 11 RT G2 IN Bedienungsanleitung

ABB

ABB HiPerGuard MV UPS Bedienungsanleitung

ABB

ABB DPA Upscale RI Series Bedienungsanleitung

ABB

ABB PowerScale CABINET A Bedienungsanleitung

ABB

ABB DPA UPScale ST40 Bedienungsanleitung

ABB

ABB PowerWave 33 Series 3 Bedienungsanleitung

ABB

ABB PowerValue 11/31 T Bedienungsanleitung

ABB

ABB HiPerGuard MV UPS Bedienungsanleitung

ABB

ABB DPA 250 S4 Bedienungsanleitung

ABB

ABB PowerValue 11 RT G2 IN Bedienungsanleitung

ABB

ABB TLE Scalable Series Bedienungsanleitung

ABB

ABB PowerValue 11 T Series Bedienungsanleitung

ABB

ABB PowerValue RT G2 Bedienungsanleitung

ABB

ABB PowerValue 11 LI Pro 600 VA Bedienungsanleitung

ABB

ABB PowerValue 11 RT 6 kVA Bedienungsanleitung

ABB

ABB MegaFlex 1000 UL S1 Bedienungsanleitung

ABB

ABB PowerValue 11/31 T Montage- und Bedienungsanleitung

ABB

ABB Eagle Bedienungsanleitung

ABB

ABB PowerValue 11 RT Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ABB

ABB PowerValue 11T IN Bedienungsanleitung

ABB

ABB PowerValue 11 RT G2 Bedienungsanleitung

ABB

ABB PowerValue 11 RT G2 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung

BPC

BPC 1.5K SMART Bedienungsanleitung