ABB SmartMedia SM2000 Handbuch

INFORMATION

No. INF01/48 Date: February 2002 Product:SM2000 Videographic Recorder

Manual: IM/SM2000

SM2000

SmartMedia Hardware Installation

noitpircseD.oNtraPytQ

ylbmessA-buSaideMtramS1600/0002RG1

wercS01x5.2M32811B2

kniLBCP0529B2

74 µroticapaCmulatnaTV61F1566B1

0002MS–teehSnoitamrofnI noitallatsnIerawdraHaideMtramS 84/10FNI1

dnagnildnaHaideMtramS–launaM eraC MS-0001MS/MI1

Note. When installing SmartMedia hardware, the

Main Board in instruments manufactured prior to January,

2002 must be modified by fitting a 47µF capacitor. This

workmustbecarriedoutbyaCompanyApprovedService

Engineer to avoid invalidating the instrument's warranty.

2 Tools Required

• Medium, flat-bladed screwdriver

• No. 1 Pozidriv screwdriver

• Fine-tipped soldering iron

1 Introduction

This information sheet describes the procedure for fitting

SmartMedia hardware to SM2000 instruments.

Note. The SmartMedia upgrade requires 2002

issue 8.0 or later Application Code and 1002 issue 6.0 or

later System Code to function correctly – see Fig. 1.1 for

details of checking the Code versions. This information

sheet also details the procedure for downloading and

installing the Application and System Code.

The SmartMedia Service Pack, GR2000/0702, includes the

following items:

Instrument Status

28/01/02

Group 1 filename

Process Group 1 – OFF

Group 2 filename

% Memory used

Time left

Process Group 2 – OFF

80.5%

5 days

ARCHIVING

Not Used

CJ TEMPERATURES

VERSION

Software

2002/8

System

1002/6

Application Code Version

System Code Version

Use the Group key to

select the Status View

Fig. 1.1 Checking the Instrument Operating Software Versions

Remove pozidriv screws

(one each side)

Lift up top cover

Remove top cover

Remove PCB locking bar

Fig. 3.2 Removing the Chassis Top Cover and PCB Locking Bar

Withdraw the instrument

from the case

Remove tamper-proof seal

(if fitted)

Unscrew the jacking screw

Information. Refitting is the

reverse of removal.

Fig. 3.1 Removing the Instrument from its Case

3) Remove the chassis top cover and PCB locking bar –

see Fig. 3.2.

3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.7

Caution. The instrument is vulnerable to

electrostatic damage. Wear an anti-static strap or

dismantle the unit on an anti-static workbench.

1) Isolate the instrument from the power supply.

2) Remove the instrument from its case – see Fig. 3.1.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.7

4) Remove the Main Board – see Fig. 3.3.

MODULE C

Carefully lift each end of

the connection locking bar and

disconnect the display

flexi-circuit from the main board

Withdraw the main board

from the chassis

Disconnect the touchscreen

connector from the main board

Slot D

Connection locking bar

Note. To disconnect the display flexi-circuit,

it may be necessary to remove the I/O module

board in slot D (if fitted).

Fig. 3.3 Removing the Main Board

Information. Refitting is the

reverse of removal. Caution. When fitting a main

board,ensureitlocatescorrectlyinthe

lugs on the chassis base.

Continued…

Note. Steps6) and 7) are applicable only if the Main

Board is Part no. GR2000/0253.

6) Refer to Fig 3.4 and check that a 47µF capacitor is fitted

across capacitor C14.

Notes.

• Step 7) is applicable only if the 47µF capacito5r is not

fitted.

• Step 7) must be carried out by a Company Approved

Service Engineer.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.7

5) Refer to Fig 3.4 and check the part number of the Main

Board.

+ve leg below

C14

Reverse of Main Board Showing Part Number

GR2000/0253

/0250A

Iss.5

Fig. 3.4 Checking the Main Board Part Number and for the 47µF Capacitor

7) Carefully solder the 47µF capacitor part no. B6651 across

capacitor C14 ensuring correct polarity – see Fig. 3.4.

8) Refit the Main Board – see Fig. 3.3

Remove pozidriv screws

(1 each side)

Disconnect configurator

board ribbon cable

Lift main board from

motherboard and withdraw

media board

Lift black

retaining flap

Disconnect

flexi-circuit

Media board

Main board

✶

Note. Flexi-circuit is not present if

neither Compact Flash nor SmartMedia

option is already fitted to the instrument.

Fig. 3.5 Removing the Media Board Sub-Assembly

Information. Refitting is the

reverse of removal.

1Check that PCB link LK1 is fitted and ensure it

is in the correct position for SmartMedia hardware.

LK1 – 5V Position

SmartMedia

LK1 – 3.3V Position

Compact Flash

Fig. 3.6 PCB Link LK1 Positions

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.7

9) Remove the existing media board sub-assembly –

see Fig. 3.5.

10)Check the position of PCB link LK1 – see Fig. 3.6.

Continued…

EMC Contacts

Position top cover as shown

Slide forward

Lower rear

Refit pozidriv screws

(one each side)

Refit PCB locking bar

ensuring the slots

in the bar locate correctly

on the boards and chassis

Caution. When positioning the

chassis top cover, take care not to

damage the EMC contacts.

Fig. 3.7 Refitting the PCB Locking Bar and Chassis Top Cover

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.7

11)Fit the new media board sub-assembly – see Fig. 3.5.

12)Refit the PCB locking bar and chassis top cover –

see Fig. 3.7.

13)Refit the instrument to the case – see Fig. 3.1.

14)Restore the power supply to the instrument.

Withdraw the instrument

from the case

Remove tamper-proof seal

(if fitted)

Unscrew the jacking screw

Push the red switch forwards to

enable access to the Application Launcher

4 Downloading and Installing the

Operating System Software – Figs. 4.1 to 4.5

Note. This section is applicable only if the

instrument Operating System requires upgrading to 2002

issue 8.0 or later Application Code and 1002 issue 6.0 or

later System Code – see Fig. 1.1 for details of checking

the Code versions.

1) Isolate the instrument from the power supply.

2) Remove the instrument from its case – see Fig. 4.1.

3) Push the red switch forwards – see Fig. 4.1.

Information. Refitting is the

reverse of removal.

Fig. 4.1 Setting the Application Launcher Switch

Note. Ensure that the

yellow switch remains in the

forward position.

Continued…

Press the

'File Viewer' button.

Highlight a configuration

to save to removable media.

Press the 'Operation' key.

Press the 'Copy to Storage Card'

option on the pop-up menu.

Repeat steps to to

save other configurations

as required.

Press the 'Exit' key twice to return

to the Application Launcher screen.

Isolate the instrument from the power supply.

Press the

'Delete Binary Partition' button.

Wait for dialog to

appear indicating

that this operation

was successful.

Press the

'Internal File View' button.

Insert a memory card containing

a folder named 'SM2000'

…4 Downloading and Installing the

Operating System Software – Figs. 4.1 to 4.5

4) Refit the instrument to the case – see Fig. 4.1.

5) Restore the power supply to the instrument.

6) Follow the on-screen instructions and perform

touchscreen calibration.

Caution. Do not use sharp objects such as

screwdrivers, pen nibs etc. to operate the touch screen.

7) Save configuration files to removeable media, as required,

and delete the binary partition – see Fig. 4.2.

Fig. 4.2 Saving Configuration Files and Deleting the Binary Partition

Note. If no configuration

files are required to be saved

to removeable media, proceed

to step 9.

Open the media door.

Connect the PC Configurator

Cable Part No. C100/0051

to the Instrument Socket.

Connect the PC Configurator

Cable Part No. C100/0051

to the RS232 Serial

Port of the PC.

Fig. 4.3 Connecting the PC Configurator Cable

…4 Downloading and Installing the

Operating System Software – Figs. 4.1 to 4.5

8) Connect the instrument to a PC on which the PC

Configurator Software has been installed – see Fig. 4.3

C:\WINCE300\PUBLIC\SM2000_3002_8.sre

Press to start

download.

Fig. 4.4 Downloading the Operating System Files

…4 Downloading and Installing the

Operating System Software – Figs. 4.1 to 4.5

9) Start 'downloader.exe' software on the PC.

10)Select the '.sre' file to download (e.g.

SM2000_3002_8.sre) – see Fig. 4.4.

Note. The software can be downloaded from either:

• Assistant database in 'Service Information' –

'Videographic Recorders' – 'SM2000'

• ABB Library at http://inside.abb.com/library in

'Instrumentation' – 'Recording and Control' –

'Recorders' – 'Paperless Chart Recorders'.

Fig. 4.5 Creating the Binary Partition

11)Restore the power supply to the instrument and start the

download of the new software by clicking on the 'Program'

button on the SM2000 Serial Downloader screen –

see Fig. 4.4.

Notes.

• Thedownload muststartwithin15secondsofapplying

power to the instrument.

• The download will take approximately 25 minutes to

complete.

12)On completion of the download, follow the on-screen

instructions and perform touchscreen calibration.

Caution. Do not use sharp objects such as

screwdrivers, pen nibs etc. to operate the touch screen.

13)Create the Binary Partition – see Fig. 4.5.

Press the 'Create

Binary Partition' button.

Wait for dialog to

appear indicating

that this operation

was successful.

Andere Handbücher für SmartMedia SM2000

Andere ABB Diktiergerät Handbücher

ABB

ABB SR100B Bedienungsanleitung

ABB

ABB ScreenMaster RVG200 Bedienungsanleitung

ABB

ABB SM500F Bedienungsanleitung

ABB

ABB C1900 Series Bedienungsanleitung

ABB

ABB C1950 Bedienungsanleitung

ABB

ABB C1900 Series Bedienungsanleitung

ABB

ABB SM3000 Bedienungsanleitung

ABB

ABB SmartMedia SM2000 Betriebsanleitung

ABB

ABB SM1000 Bedienungsanleitung

ABB

ABB C1900 Series Bedienungsanleitung

ABB

ABB COMMANDER 1900 Series Bedienungsanleitung

ABB

ABB SM500F Schulungshandbuch

ABB

ABB SmartMedia SM2000 Bedienungsanleitung

ABB

ABB SR100A Bedienungsanleitung

ABB

ABB ScreenMaster RVG200 Schulungshandbuch

ABB

ABB C1300 Betriebsanleitung

ABB

ABB C1300 Bedienungsanleitung

ABB

ABB SmartMedia SM2000 Bedienungsanleitung

ABB

ABB Commander C1900 Installations- und Betriebshandbuch

ABB

ABB SR100B Bedienungsanleitung

ABB

ABB SM1000 Bedienungsanleitung

ABB

ABB SmartMedia SM2000 Betriebsanleitung

ABB

ABB SM1000 Bedienungsanleitung

Beliebte Diktiergerät Handbücher anderer Marken

Sony

Sony ICD-UX533F Bedienungsanleitung

RCA

RCA VR5230 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Benutzerhandbuch

Sony

Sony TCM-400DV Bedienungsanleitung

LogTag

LogTag TREL30-16 Bedienungsanleitung

SVAT

SVAT CVP800 Bedienungsanleitung

Marantz

Marantz PMD620 Bedienungsanleitung

Zoom

Zoom H4next Bedienungsanleitung

Roland

Roland BR-900CD Bedienungsanleitung

JVC

JVC ProHD GY-HMZ1U Bedienungs- und Wartungshandbuch

Panasonic

Panasonic PQT8531-P Bedienungsanleitung

Sanyo

Sanyo TRC-6400 Bedienungsanleitung

Tascam

Tascam DR-07 Bedienungsanleitung

Olympus

Olympus DW-90 Bedienungsanleitung

Sanyo

Sanyo ICR-B150 Bedienungsanleitung

Korg

Korg D4 Bedienungsanleitung

Sony

Sony ICD-SX46 - Ic Recorder Bedienungsanleitung

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Montageanleitung