Abilia GEWA Connect Bedienungsanleitung

GEWA Connect

Art. nr: 461180 461188

EN 7.0

User manual

Table of Contents

Introduction 5

About GEWA Connect 5

Intended purpose 5

About this document 6

Product overview, Multibox 7

Preparations 8

Requirements to use the product 8

To set the system settings correctly on the Android mobile device 8

To prepare the hardware 8

To create a user account at myAbilia and register the license 9

To install the Multibox and install and configure the GEWA Connect application 9

GEWA Settings 10

Personalise GEWA Connect 16

GEWA at myabilia.com 16

Function buttons and symbols 16

Pages 16

Buttons 17

To create a new page 17

To create an IR button 18

To create a button with IR macro function 19

To create a button with a GEWA Radio signal 19

To create a button for Alert 20

To create a page link 20

Communication buttons 20

To create a button for a personal contact 21

To create a button for the phone or messages application 22

To edit the appearance of a created object 22

To arrange buttons on a page 23

Shortcuts 23

Scanning sound 24

Use GEWA Connect 25

To start and turn off the Multibox 25

To make sure that the product operates correctly 25

To use GEWAConnect for environmental control 25

To make a phone call 25

To send text messages 26

To read text messages 26

To use the "Alert" function 26

To use the scanning function 27

Maintenance 32

To charge the batteries 32

Battery status indicator on the Multibox 32

To clean the product 32

To update the GEWAConnect application 33

To do a backup 33

To restore the product 33

To prepare the product for a new user 34

To update the firmware in the Multibox 34

Troubleshooting 35

Storage and disposal 36

Storage 36

Disposal 36

Product specifications 36

Multibox 36

Accessories 36

Important information 37

Safety definitions 37

Safety instructions before using GEWA Connect 37

Serious incidents 38

Conformance with requirements for medical devices 38

Product liability 38

Registered trademarks 38

Contact Information 39

Introduction

About GEWA Connect

The product is a remote control for appliances and electronic equipment. The

product consists of the application "GEWAConnect" to be installed on an

Android mobile device (not included) and an environmental control unit

(Multibox). With the Multibox, the user can also get access to all applications

on the mobile device when operating the product by use of an external switch.

myAbilia

myAbilia is a web service for administration and synchronisation of the data in

the product. To use the product it is necessary to have a myAbilia user account

and register the license included with the product. Refer to www.abilia.com for

more information about myAbilia.

Intended purpose

The product helps users who are physically unable to use a standard remote

control, to control electronic equipment at home, in school or at the workplace.

The electronic equipment may include television sets, lighting, air-

conditioners, door openers, etc. Through an external switch (not included) or

by tapping on the screen, the user can control electronic equipment by means

of sending a wireless signal to the receiver of the selected device.

The product is intended for indoor use only.

Introduction

About this document

This user manual describes how to set up and use the product. The user

manual is intended for technicians and support persons who have the

responsibility to configure the product and to educate the user in the use of this

product.

The configuration instructions in this user manual assume that the reader has

knowledge about the concept of infrared (IR) and GEWARadio (GR) signals.

The instructions in this user manual assume that the user has an Android

mobile device and that the reader is familiar with that device.

Product overview, Multibox

SW1 SW2

5 6 7 8

1. Receiver of infrared (IR) signals

for IR recordings. Refer to To

create an IR button on page18.

2. Activity indicator

3. Speaker

4. Battery status indicator. Refer to

Battery status indicator on the

Multibox on page32.

5. Headset jack

6. Phone jack. Not in use.

7. SW1/SW2, jack for external

switch and relay output

8. Micro USB port

9. Power button

Included parts

lEnvironmental control unit

(Multibox)

lCharger for the Multibox,

including a 2 m USBcable

lVoucher with license key

Included documents

lUser manual (this document)

Introduction

Preparations

Requirements to use the product

lAn Android mobile device with Android version 7.0 or higher and support

for Bluetooth® 3.0.

lA Google account.

lApplications that are compatible with scanning:

oUse the keyboard application "Gboard".

oUse the browser application "Google Chrome".

oFor the camera, use for example "Open Camera".

oFor the home screen, use for example "Nova launcher".

To set the system settings correctly on the Android

mobile device

Do these settings to make sure that the product operates correctly:

lSet all power saving settings and battery optimisation for all applications

to off.

lTurn off automatic updates of the operating system and applications.

lTurn off the screen saver to make sure that the screen is always on.

lMake sure that the screen lock can be unlocked with scanning. If not, turn

off the screen lock function.

lMake sure that the necessary applications can be used with scanning.

lMake sure that the setting for virtual keyboard on the Android mobile

device is on, also when a physical keyboard is connected to the Multibox.

To prepare the hardware

1. Charge the battery of the Multibox and the mobile device. Refer to To

charge the batteries on page32.

2. To operate the product with an external switch, connect the switch to the

SW1 jack on the Multibox.

NOTE: An external switch is not supplied with the product.

Preparations

To create a user account at myAbilia and register the

license

1. On a computer, go to myabilia.com. Create a user account and log in.

2. Click , then click on "My profile" and select "Licenses".

3. Click on "Add license", enter the license key supplied with the product

and click "Add" to save.

4. Click on the tab "Modules", select "GEWA" and click "Save".

To install the Multibox and install and configure the

GEWA Connect application

1. Download the GEWAConnect application from Google Play Store and

install it. 2 application icons show on the touch screen: "GEWAConnect"

and "Settings".

2. Open the GEWAConnect application. A configuration guide starts.

3. Tap "Get started", log in to myAbilia and do the necessary

configurations.

4. After each configuration, tap the arrow in the bottom right corner to

continue the configuration guide.

NOTE: It is necessary to have an Internet connection to log in and the product

automatically searches for a Wi-Fi network. If there is no Wi-Fi network

available, "Android Settings" opens and you can configure an Internet

connection.

NOTE: GEWA Connect is always active in the background and scanning can

be activated by pushing the external switch regardless of which application is

in use. To access the environmental control functionality it is, however,

necessary to open the GEWA Connect application.

NOTE: When the configuration is finished, the product can be used without

Internet connection, but then the user data is not automatically synchronised

between the product and myAbilia.

Preparations

GEWA Settings

You can open the "Settings" menu in 3 different ways:

lAlternative 1: Open the "GEWA Settings" application on your mobile

device.

lAlternative 2: Tap (A), select "Switch to Edit mode", tap (B) and select

"Settings".

A B

lAlternative 3: Push and hold the external switch until the "Longpress"

menu opens, and select "Settings". Refer to Use GEWA Connect on

page25.

Andere Handbücher für GEWA Connect

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Abilia Fernbedienung Handbücher

Abilia

Abilia 429240-1 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung