Abit GURU CLOCK Bedienungsanleitung

English

GuruClock

The3rd EyeOverYourPC

˙ This Guru Clock works on ABIT’s motherboard

designed with µGuru Technology only.

˙ Although this Guru Clock is a hot-swappable device,

still it would be much safer to power off your PC

before connecting cables inside the chassis.

˙ Connect [GURU1] and [USB] plugs to their

corresponding headers on motherboard first; leave the

other end for the Guru Clock later.

˙ Log in MSN.

˙ Install Skype (available from http://www.skype.com).

˙ To run the µGuru Utility, you will have to install the

µGuru driver first by the “Driver & Utility” CD that

was originally came packed with your motherboard.

Follow its on-screen instruction to complete the

installation.

There are 3 ways to run the µGuru Utility:

(1): Execute the [uGuru] program by entering the

Windows Menu [Start] [All Programs] [ABIT]

[ABIT uGuru] [uGuru].

(2): After executed the [uGuru] program, a µGuru

icon will be positioned at the taskbar. Double click

your mouse button on the µGuru icon.

(3): Or you may move your mouse pointer to the

µGuru icon, and right-click your mouse button on the

µGuru icon. Move your mouse pointer to [Maximize]

and left-click on it.

ABIT Computer Corporation P/N: 4200-0417-04 Rev. 2.00

After installed ABIT’s motherboard designed with µGuru Technology and the Windows operating system,

you may start to connect with your PC system. Remember to power off your PC first.

1. Assemble the Guru Clock body with its back-support together.

2. Uncover PC chassis. Connect [GURU1] plug to the [Guru 1] header on motherboard. Connect [USB]

plug to either [FP-USB1] or [FP-USB2] header on motherboard.1

3. Secure the I/O shield to the PC chassis’s rear panel. Cover PC chassis.

4. Insert the data plug (9-pin Mini-Din) into the socket located through the back-support.2The Guru Clock

is now ready to serve.

1All plugs fit in one direction only with their corresponding headers or socket. Please check the orientation first before

connection.

2This data plug can be connected or disconnected while your PC system is on.

2 Guru Clock

[Power On / Power Off]: Press this button to power-on your PC. Hold this button for more than

four (4) seconds to power-off your PC.

[Menu]: Menu selection button.

[Buzzer]: Ringing beeper for incoming Skype contact.

[OK]: Menu confirm button.

[Phone On / Phone Off]: Phone-on/phone-off button for Skype contact.

[Conference Call]: Preset group calling for Skype contact.

[Private Call]: Preset individual calling for Skype contact.

[Microphone]: Microphone jack.

[Earphone]: Headphone jack.

[USB]: Remote USB port.

Guru Clock 3

CPU Speed: This section displays the readings of CPU speed.

• [Turbo], [Normal], [Quiet], [AutoDrive], [Default], [User1], [User2], and [User3]:These options

are the level you choose for OC Guru.

• [VGA]:This icon appears only when having ABIT’s vGuru VGA card installed and its vGuru

function enabled.

Frequency/Voltage: This section displays the frequency or voltage readings detected from the

following items on motherboard:

• [CPU]: Central Processing Unit.

• [DDR]: DDR memory modules.

• [AGP]: AGP slot.

• [PCIE]: PCI Express slot.

• [FM]: (Function reserved)

• [CH]: (Function reserved)

• [VRAM]: Memory modules on ABIT’s VGA card (Available for voltage reading only)

Room Temperature/Debug Code: This section displays the temperature readings detected from

Guru Clock.

• [Debug]: This icon lights up during the system starting up. The AWARD POST CODE will be

displayed at this moment. Any abnormal hardware configuration detected will halt the system and

display the error code on LCD screen. This icon lights off after entering operating system.

• [Room Temp]: This icon lights up when displaying the room temperature readings detected from the

thermal sensor located at Guru Clock. (As long as the system power supply is connected with AC

power source, this readings will be kept on displaying even after system power-off.)

Present Time: This section displays your preset time in 12-hour or 24-hour format. (As long as the

system power supply is connected with AC power source, this readings will be kept on displaying even

after system power-off.)

4 Guru Clock

Skype: This section displays when activating the Skype function.

• The Skype is functioning.

• The phone set is picked up. This icon flashed when having incoming call, lighted when

communicating.

• The phone set is hung up.

• Private Call.

• Conference Call.

• Five preset private/conference-calling numbers/groups.

Temperature: This section displays the temperature readings detected from the thermal sensor located

at the following areas:

• [CPU]: Central Processing Unit on motherboard.

• [VGA]: GPU Core of ABIT’s VGA card.

• [PWM]: Power-supplying module on motherboard.

• [SYS]: Motherboard System.

Fan Speed: This section displays the fan-speed readings detected from the following fan-power

connectors: [CPU], [SYS], [NB], [VGA], [AUX1], [AUX2], [AUX3], [AUX4], [OTES].

These icons flash when the PC is having the following activities:

• The PC is having USB add-in devices connected.

• E-Mail message received.

• MSN message received.

• Abnormal temperature reading has been detected.

• (Function Reserved)

Guru Clock 5

OC (Over Clocking)

Press Select Press Press 

Select Turbo/Normal/Quiet/AutoDrive3/Default/User 1~3/VGA4Press

Hardware Temperature

Press Select Press Press 

Select CPU/VGA/PWM/SYS/(ALL)6Press

Fan Speed

Press Select Press Press 

Select CPU/SYS/NB/VGA/AUX1~4/OTES/(ALL7)Press

3The [AutoDrive] option can only be controlled under the µGuru Utility.

4The VGA option appears only when applying ABIT’s VGA card equipped with µGuru technology.

5Press this button to confirm within 4 seconds after any new setting. Failing to do so will revert the displaying

mode to its previous status.

6All the selections made will be displayed one at a time.

7By selecting all options, all their readings will be displayed one after another in loop.

6 Guru Clock

Frequency/Voltage8

Press Select Press Press 

Select CPU/DDR/AGP/PCIE/(VRAM9) Press

Skype Private Call10

Press11 Select Press to phone on 

Press to phone off

Skype Conference Call

Press12 Select Press to phone on 

Press to phone off

8The readings of “Frequency” and “Voltage” are displayed in loop.

9The “VRAM” option is selectable for “Voltage” only.

10 To do the Skype contact through Guru Clock, run the µGuru Utility first.

11 One press for private call number 1; two for 2; three for 3; four for 4; five for 5.

12 One press for conference call number 1; two for 2; three for 3; four for 4; five for 5.

Guru Clock 7

E-

-M

1. Execute the [uGuru] program by entering the

Windows Menu [Start] [All Programs] 

[ABIT] [ABIT uGuru] [uGuru]. The default

panel appears.

Move your mouse pointer to the [Setup] button and

left-click on it to enter the setup menu.

2. This screen appears at first when doing the setup.

Check the box of [Allow this program to use

Skype], it will not ask again next time entering the

setup menu.

Click <OK> to go to next step.

3. To do the E-Mail setting, pull down the scroll bar to

locate the E-Mail icon and left-click on it.

(1) Check the box [Enable E-mail checking]14.

(2) Type in the box [Check every minutes]

the interval you prefer.

(3) Click <Add> to add in your POP3 information.

You may add in multiple E-Mail addresses.

(4) Click <Remove> if you want to remove the

E-Mail address that had previously established.

(5) Click <Modify> if you want to modify the

E-Mail address that had previously established.

Click <Apply> to save this page. Click <OK> to

save and leave this page. Click <Cancel> to cancel

setting and leave this page.

13 For the rest of the µGuru family members, like [ABIT EQ], [OC Guru], [FAN EQ], [FlashMenu], and [BlackBox], please

refer to the pamphlet of µGuru Technology that packed within the box of ABIT’s motherboard designed with µGuru

Technology.

14 The E-Mail icon appears on the LCD screen after having this box checked.

8 Guru Clock

(6) Type in your POP3 information.

Click <OK> to save and leave this page.

Click <Cancel> to cancel setting and leave this

page.

4. To do the MSN setting, pull down the scroll bar to

locate the MSN icon and left-click on it.

Check the box [MSN notify enable].

Click <Apply> to save this page.

Click <OK> to save and leave this page.

Click <Cancel> to cancel setting and leave this

page.

5. To do the Skype setting, pull down the scroll bar to

locate the Skype icon and left-click on it.

(1) Select the corresponding media for Line-in and

Line-out signal.

To enable the microphone and earphone through

Guru Clock body, select [C-Media USB

Headphone Set] for both [Line in] and [Line

out] devices.

To enable the microphone and earphone through

other audio interface added on your

motherboard, select the name of that interface

for both [Line in] and [Line out] devices.

Leaving these two selections to [Default] will

bypass the signal to the built-in audio interface

on your motherboard.

Guru Clock 9

(2) To add or delete your friend-list into the five

preset calling numbers for the “Private Call”

function, left-click or button after

selected from the “Friends” column.

(3) To add or delete your friend-list into the five

preset calling numbers for the “Conference

Call” function, first select the Group ID, and

then left-click or button after selected

group members from the “Friends” column.

Click <Apply> to save this page.

Click <OK> to save and leave this page.

Click <Cancel> to cancel setting and leave this

page.

6. To do the Guru Clock monitor setting, pull down

the scroll bar to locate the Guru Clock icon and

left-click on it.

(1) There are [Fan], [Voltage], [Frequency], and

[Temperature] monitoring items available to

select. Check the box for the item you want to

monitor through Guru Clock.

(2) [Time Format]: Select the 12-hour or 24-hour

format for your present time.

(3) [Temperature Format]: Select the

temperature-measuring unit in Celsius or

Fahrenheit. The value of measuring unit on the

LCD screen will be replaced in real time.

Click <Apply> to save this page.

Click <OK> to save and leave this page.

Click <Cancel> to cancel setting and leave this

page.

10 Guru Clock

Andere Handbücher für GURU CLOCK

Inhaltsverzeichnis

Sprachen:

Andere Abit Uhr Handbücher

Abit

Abit GURU CLOCK Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung