Abit BF6 Bedienungsanleitung

The information in this document is subject to change without notice and does not

represent a commitment on part of the vendor, who assumes no liability or

responsibility for any errors that may appear in this manual.

No warranty or representation, either expressed or implied, is made with respect to

the quality, accuracy or fitness for any particular part of this document. In no event

shall the manufacturer be liable for direct, indirect, special, incidental or

consequential damages arising from any defect or error in this manual or product.

Product names appearing in this manual are for identification purpose only and

trademarks and product names or brand names appearing in this document are

property of their respective owners.

This document contains materials protected under International Copyright Laws. All

rights reserved. No part of this manual may be reproduced, transmitted or

transcribed without the expressed written permission of the manufacturer and

authors of this manual.

If you do not properly set the motherboard settings causing the motherboard to

malfunction or fail, we cannot guarantee any responsibility.

MN-172-2A2-81 Rev. 1.02

BF6 Motherboard User’s Manual

Table of Contents

CHAPTER 1. INTRODUCTION OF BF6 FEATURES 1-1

1-1. FEATURES OF THIS MOTHERBOARD 1-1

1-2. SPECIFICATIONS 1-2

1-3. LAYO U T DIAGRAM 1-5

1-4. THE SYSTEM BLOCK DIAGRAM 1-6

CHAPTER 2. INSTALLING THE MOTHERBOARD 2-1

2-1. INSTALLING THE MOTHERBOARD TO THE CHASSIS 2-2

2-2. INSTALLATION OF THE PENTIUMII/III, CELERONTM CPU 2-3

2-3. INSTALLING SYSTEM MEMORY 2-3

2-4. CONNECTORS, HEADERS AND SWITCHES 2-6

2-5. CPU FREQUENCY SETTINGS 2-17

CHAPTER 3. INTRODUCTION OF THE BIOS 3-1

3-1. SOFTMENU III SETUP 3-4

3-2. STANDARD CMOS FEATURES SETUP MENU 3-9

3-3. ADVANCED BIOS FEATURES SETUP MENU 3-14

3-4. ADVANCED CHIPSET FEATURES SETUP MENU 3-20

3-5. INTEGRATED PERIPHERALS 3-24

3-6. POWER MANAGEMENT SETUP MENU 3-29

3-7. PNP/PCI CONFIGURATIONS 3-37

3-8. PC HEALTH STATUS 3-42

3-9. LOAD FAIL-SAFE DEFAULTS 3-43

3-10. LOAD OPTIMIZED DEFAULTS 3-43

3-11. SET PASSWORD 3-44

3-12. SAV E & EXIT SETUP 3-45

3-13. EXIT WITHOUT SAV I N G 3-46

APPENDIX A BIOS FLASHING USER INSTRUCTIONS

APPENDIX B INSTALLING THE HIGHPOINT XSTORE PRO

UTILITY

APPENDIX C HARDWARE MONITORING FUNCTION

(INSTALLING THE WINBOND HARDWARE DOCTOR

UTILITY)

APPENDIX D THE THERMAL CABLE

APPENDIX E BX 133 OVERCLOCKING GUIDE

APPENDIX F HOW TO GET TECHNICAL SUPPORT

APPENDIX G TROUBLESHOOTING (NEED ASSISTANCE?)

Introduction of BF6 Features 1-1

User’s Manual

Chapter 1. Introduction of BF6 Features

1-1.Features of This Motherboard

The motherboard is designed for a new generation CPUs. It supports the Intel SLOT1

structure (PentiumII/III and CeleronTM processors), up to 768MB of memory, super I/O,

and Green PC functions. The motherboard provides high performance for server systems

and meets the requirements for desktop system for multimedia in the future.

The BF6 has built-in hardware monitoring functions (you can refer to Appendix C for

detailed information), they can monitor and protect your computer insuring a safe

computing environment. The BF6 also supports the PS/2 keyboard, PS/2 mouse, password

and hot key wake up features (you can refer to section 3-5 for detailed information), letting

you easily wake up your system by these devices. The motherboard can provide high

performance for workstations and meets the requirements for desktop systems for

multimedia in the future.

The BF6 uses the ABIT newest BIOS technology – CPU Soft MenuTM III. The ABIT CPU

Soft MenuTM III technology not only lets you configure CPU settings easily but also lets you

have a greater choice of CPU FSB clock settings. It provides 120 different CPU FSB clock

settings. From 84 to200 MHz, the increment for CPU FSB clock settings is 1Mhz by 1MHz

(you can refer to section 3-1 for detailed information).

Sets You Free From the Y2K Threat

The potential threat of Year 2000 (Y2K) problems are making everyone very nervous. The

Y2K issue applies to almost any device, firmware, or software that operates on or with year

based dates. This problem is caused by a design flaw in the Real Time Clock (RTC) unit.

The RTC only changes the last two digits of the year code, but not the century information.

As a result, when it comes to 12:00 AM January 1, 2000 the RTC will switch from

December 31 11:59 PM 1999 to 12:00 AM January 1 1900.

Y2K compliance deals with the date change over from 31 December 1999 to 1 January 2000,

and with recording and reporting of all dates from the RTC including leap year dates. This

motherboard is free from the Y2K problem because its BIOS are Y2K compliant.

1-2 Chapter1

BF6

Please Note

If the operating system or application software cannot handle Year 2000 dates, you will

still be facing the Y2K threat because it is not a hardware problem that relates to the

motherboard itself. According to Award BIOS, it is BIOS source code released after 31

May 1995 complies with all known Y2K issues; however, it may still fail the 2000.exe

test. Award has modified its BIOS source code to accommodate the requirements of

2000.exe. Award BIOS source code issued later than 18 November 1996 passes the

NTSL 2000.exe test program.

1-2. Specifications

1. CPU

!Supports IntelPentiumIII 450 ~800 MHz Processor cartridge.

!Supports IntelPentiumII 233 ~ 450 MHz Processor cartridge.

!Supports Intel®Celeron™ 266 ~ 533MHz processors (Based on 66MHz PPGA package)

!Supports 66 and 100MHz CPU external clock speeds

2. Chipset

!Intel®440BX chipset (82443BX and 82371EB)

!Supports Ultra DMA/33 IDE protocol

!Supports Advanced Configuration and Power Management Interface (ACPI)

!Accelerated Graphics Port connector supports AGP 1x and 2x mode (Sideband) 3.3V

device

3. Memory (System Memory)

!Three 168-pin DIMM sockets support SDRAM modules

!Supports up to 768MB MAX. (8, 16, 32, 64, 128, 256 MB SDRAM)

!Supports ECC

4. System BIOS

!CPU SOFT MENU™ III, can easily set the processor parameters

!AWARD 6.0 Version BIOS

!Supports Plug-and-Play (PnP)

!Supports Advanced Configuration Power Interface (ACPI)

!Supports Desktop Management Interface (DMI)

!Year 2000 compliant

Introduction of BF6 Features 1-3

User’s Manual

5. Multi I/O Functions

!2x Channels of Bus Master IDE Ports supporting up to four Ultra DMA 33 devices

!PS/2 Keyboard and PS/2 Mouse Connectors

!1x Floppy Port ( up to 2.88MB)

!1x Parallel Port (EPP/ECP)

!2x Serial Ports

!2x USB Connectors

6. Miscellaneous

!ATX form factor

!One AGP slot, six PCI slots and one ISA slot

!Supports PS/2 keyboard, PS/2 mouse, password and hot key wake-up functions

!Built-in Wake on LAN header

!Built-in IrDA TX/RX header

!Built-in SB-Link™header

!Built-in Wake On Ring header

!Built-in two SMBus headers

!Hardware monitoring：Included fan speed, voltages, CPU and system environment

temperature

!One Thermal Sensor Cable included

!Board size: 305 * 200mm

1-4 Chapter1

BF6

"Supports Wake On LAN, Keyboard or Mouse, but your ATX power supply 5V

standby power must be able to provide at least a 720mA current capacity.

Otherwise, the functions may not work normally.

"PCI slot 2 shares IRQ signals with the PCI slot 5

"PCI slot 3 shares IRQ signals with the PCI slot 6

"PCI slot 4 shares IRQ signals with the USB controller

"PCI slot 6 is fully bus slave. Thus you can’t install a PCI card that needs to use bus

master signals into PCI slot 6. But you can install voodoo 1 or 2 that doesn’t need to

use bus aster signals into PCI slot 6.

#Above 66MHz/100MHz bus speeds are supported but not guaranteed due to the PCIand

chipset specifications.

#Sound Blaster™is a registered trademark of Creative Technology Ltd. in the United

States and certain other countries. Sound Blaster - LINK™and SB-LINK™ are

trademarks of Creative Technology Ltd.

#Specifications and information contained in this manual are subject to change without

notice.

Note

All brand names and trademarks are the property of their respective owners.

Introduction of BF6 Features 1-5

User’s Manual

1-3. Layout Diagram

Figure 1-2. Motherboard component location

1-6 Chapter1

BF6

1-4. The System Block Diagram

Figure 1-3. System diagram of the 440BX chipset

Inhaltsverzeichnis

Andere Abit Hauptplatine Handbücher

Abit

Abit KT7E Bedienungsanleitung

Abit

Abit VP6 Bedienungsanleitung

Abit

Abit AT6 Bedienungsanleitung

Abit

Abit SA7 Bedienungsanleitung

Abit

Abit SI-1NS Bedienungsanleitung

Abit

Abit GD8 Pro Bedienungsanleitung

Abit

Abit IB9 Bedienungsanleitung

Abit

Abit IT5A Bedienungsanleitung

Abit

Abit BD7II Bedienungsanleitung

Abit

Abit KR7A Bedienungsanleitung

Abit

Abit AN52S Bedienungsanleitung

Abit

Abit BH6 Bedienungsanleitung

Abit

Abit VT7 Bedienungsanleitung

Abit

Abit SA6 Bedienungsanleitung

Abit

Abit KX7-333 Bedienungsanleitung

Abit

Abit AN52 Bedienungsanleitung

Abit

Abit KT7E Bedienungsanleitung

Abit

Abit AI7-G Bedienungsanleitung

Abit

Abit LM6E Pentium II Bedienungsanleitung

Abit

Abit IT7-MAX2 Bedienungsanleitung

Abit

Abit SX7-533 Bedienungsanleitung

Abit

Abit Socket 462 System Board Bedienungsanleitung

Abit

Abit IG-80 Series Bedienungsanleitung

Abit

Abit NF7-M Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung