Abov MC96F6432S Series Bedienungsanleitung

CMOS single-chip 8-bit MCU

with 12-bit A/D converter and

LCD driver

MC96F6432S

User’s manual

Main features

8-bit Microcontroller With High Speed 8051 CPU

Basic MCU Function

–32Kbytes Flash Code Memory

–1024bytes SRAM

Built-in Analog Function

–Power-On Reset and Low Voltage Detect Reset

–Internal 16MHz RC Oscillator (±1.5%, TA= 0 ~ +50°C)

–WatchdogTimer RC Oscillator (5kHz)

Peripheral Features

–12-bitAnalog to Digital Converter (16inputs)

–USI (USART + SPI + I2C) 2sets

–LCD Driver (21segments x 8commons)

I/O and Packages

–Up to 42 programmable I/O lines with 44 MQFP-1010

–32 LQFP

–32/28 SOP, 28 TSSOP

Operating Conditions

–1.8V to 5.5V Wide Voltage Range

–-40°C to 85°C Temperature Range

Application

–Small HomeAppliance

–BLDC Motor Controller

V 1.9

Revised 22 June, 2018

MC96F6432S

ABOV Semiconductor Co., Ltd.

Revision history

Version

Date

Revision list

0.0

2012.08.24

Published this book.

1.0

2013.05.22

―

1.1

2014.01.22

Add Recommended Circuit and Layout

Add the description of IFR

Fix the byte count of instruction “DJNZ Rn,rel”

1.2

2014.07.08

Add package of 28TSSOP, “MC96F6332SR”.

Add note of ADC in Electrical Characteristics, “When AVREF is lower than 2.7V,

the ADC resolution is worse.”

Change “Read Protection”to “Code Read Protection”in Configure Option

Change “Hard-Lock”to “Code Write Protection ”in Configure Option

Change “RESETB Select”to “Select RESETB pin”in Configure Option

Change “Protection Area”to “Specific Area Write Protection”in Configure

Option.

Add note of “Specific Area Write Protection”in Configure Option, “When PAEN

= ‘1’, it is applied.”

1.3

2014.11.05

Add Contents of Flash, “Protection for Invalid Erase/Write”

1.4

2015.04.23

Change contents of Interrupt sequence flow.

Add a note at P0, P1, P2, P3, P4, P5, EIFLAG0 register description and SFR

map.

Change a Figure 11.53 A/D Analog Input pin with Capacitor in12-Bit A/D

Converter.

1.5

2015.05.11

Add a chapter “17.3 ESD Test Method”.

1.6

2015.12.09

Add package of 32-LQFP, “MC96F6332SL”

1.7

2016.04.06

Add Flash Data Retention Time in Chapter 7.15 Internal Flash Rom

Characteristics

Add a chapter 7.23 Recommended Circuit and Layout with SMPS Power.

Modify the program tips in Chapter 15. Flash Memory.

Add an appendix about “Flash Protection for invalid Erase/Write”

1.8

2017.02.01

Added the note on the flash memory erase and write in Chapter 15. Flash

Memory.

Updated OCD dongle image and writing tool images in Chapter 1.3

Development tools.

Fixed typos of USI Status Register in Chapter 11.12 USI(UART + SPI + I2C).

1.9

2018.06.22

Revised this book.

Fixed typos.

Updated All Package Diagram.

Version 1.9

Published by FAE team

Additional information of this manual may be served by ABOV Semiconductor offices in Korea or distributors.

ABOV Semiconductor reserves the right to make changes to any information here in at any time without notice.

The information, diagrams and other data in this manual are correct and reliable;

however, ABOV Semiconductor is in no way responsible for any violations of patents or other rights of the third

party generated by the use of this manual.

MC96F6432S

ABOV Semiconductor Co., Ltd.

1 Overview

1.1. Description

The MC96F6432S is an advanced CMOS 8-bit microcontroller with 32Kbytes of FLASH. This is powerful

microcontroller which provides a highly flexible and cost effective solution to many embedded control applications. This

offers the following features: 32Kbytes of FLASH, 256bytes of IRAM, 768bytes of XRAM, general purpose I/O, basic

interval timer, watchdog timer, 8/16-bit timer/counter, 16-bit PPG output, 8-bit PWM output, 10-bit PWM output, watch

timer, buzzer driving port, SPI, USI, 12-bit A/D converter, LCD driver, on-chip POR, LVR, LVI, on-chip oscillator and

clock circuitry. The MC96F6432S also supports power saving modes to reduce power consumption.

Device Name

FLASH

XRAM

IRAM

ADC

I/O PORT

Package

MC96F6432SQ

32Kbytes

768bytes

256bytes

16inputs

44 MQFP

MC96F6332SL

12inputs

32 LQFP

MC96F6332SD

12inputs

32 SOP

MC96F6332SM

11inputs

28 SOP

MC96F6332SR

11inputs

28 TSSOP

Table 1.1 Ordering Information of MC96F6432S

MC96F6432S

ABOV Semiconductor Co., Ltd.

1.2 Features

CPU

–8-bit CISCcore (M8051, 2 clocks per cycle)

ROM (FLASH) Capacity

–32Kbytes Flash with self-read and write capability

–In-System Programming(ISP)

–Endurance : 100,000times

–Retention : 10 years

256bytes IRAM

768bytes XRAM

–(27bytes including LCD display RAM)

General Purpose I/O (GPIO)

–Normal I/O : 9ports (P0[2:0], P5[5:0])

–LCD shared I/O : 33ports (P0[7:3], P1, P2, P3, P4)

Timer/Counter

–Basic Interval Timer (BIT) 8-bit × 1-ch

–Watch Dog Timer (WDT) 8-bit × 1-ch

–5kHz internal RC oscillator

–8-bit × 1-ch (T0), 16-bit × 2-ch (T1/T2)

–8-bit × 2-ch (T3/T4) or 16-bit × 1-ch (T3)

Programmable Pulse Generation

–Pulse generation (byT1/T2)

–8-bit PWM (byT0)

–6-ch 10-bit PWM for Motor (byT4)

Watch Timer (WT)

–3.91ms/0.25s/0.5s/1s /1min interval at 32.768kHz

Buzzer

–8-bit × 1-ch

SPI 2

–8-bit × 1-ch

USI0/1 (UART + SPI + I2C)

–8-bit UART × 2-ch, 8-bit SPI × 2-ch and I2C × 2-ch

12-bit A/D Converter

–16 Input channels

LCD Driver

–21segments and 8common terminals

–Internal or externalresistor bias

–Two Internal Resistors Selectable

–1/2, 1/3, 1/4, 1/5, 1/6 and 1/8 duty selectable

–Resistor Bias and 16-step contrast control

Power On Reset

–Reset release level (1.4V)

Low Voltage Reset

–14 levels detect

(1.60/ 2.00/ 2.10/ 2.20/ 2.32/ 2.44/ 2.59/ 2.75/ 2.93/

3.14/ 3.38/ 3.67/ 4.00/ 4.40V)

Low Voltage Indicator

–13 levels detect

(2.00 / 2.10/ 2.20/ 2.32/ 2.44/ 2.59/ 2.75/ 2.93/ 3.14/

3.38/ 3.67/ 4.00/ 4.40V)

Interrupt Sources

–External Interrupts

–(EXINT0~7, EINT8, EINT10, EINT11, EINT12) (12)

–Timer(0/1/2/3/4) (5)

–WDT (1)

–BIT (1)

–WT (1)

–SPI 2 (1)

–USI0/1 (6)

–ADC (1)

Internal RC Oscillator

–Internal RC frequency: 16MHz ±1.5% (TA= 0 ~ +50°C)

Power Down Mode

–STOP, IDLE mode

Operating Voltage and Frequency

–1.8V~ 5.5V (@32 ~ 38kHz with Crystal)

–1.8V~ 5.5V (@0.4 ~ 4.2MHz with Crystal)

–2.7V~ 5.5V (@0.4 ~ 10.0MHzwith Crystal)

–3.0V~ 5.5V (@0.4 ~ 12.0MHz with Crystal)

–1.8V~ 5.5V (@0.5 ~ 8.0MHz with Internal RC)

–2.0V~ 5.5V (@0.5 ~ 16.0MHz with Internal RC)

–Voltage dropout converter included for core

Minimum Instruction Execution Time

–125ns (@16MHz main clock)

–61us (@ 32.768kHz sub clock)

Operating Temperature

––40 ~ +85℃

Oscillator Type

–0.4 - 12MHz Crystal or Ceramic for main clock

–32.768kHz Crystal for sub clock

•Package Type

–44 MQFP-1010

–32 LQFP, 32 SOP

–28 SOP, 28 TSSOP

–Pb-free package

MC96F6432S

ABOV Semiconductor Co., Ltd.

1.3 Development tools

1.3.1 Compiler

ABOV Semiconductor does not provide compiler. It is recommended that you consult a compier provider.

The MC96F6432S core is Mentor 8051, and the ROM size is smaller than 64Kbytes.Therefore, developer can use the

standard 8051 compiler from other providers.

1.3.2 OCD(On-chip debugger) emulator and debugger

The OCD (On Chip Debug) emulator supports ABOV Semiconductor’s 8051 series MCU emulation.The OCD interface

uses two-wire connection between PC and MCU which is attached to user’s system. The OCD can read or change the

value of MCU internal memory and I/O peripherals. And the OCD also controls MCU internal debugging logic, it means

OCD controls emulation, step run, monitoring, etc.

The OCD debugger program works on Microsoft-Windows NT, 2000, XP, Vista (32-bit) operating system.If you want to

see more details, please refer to OCD debugger manual. You can download debugger S/W and manual from our web-

site (http://www.abov.co.kr).

Connection:

−DSCL(MC96F6432 P01 port)

−DSDA(MC96F6432 P00 port)

NOTE) 1. MC96F6432S does not support the OCD function. MC96F6432 should be used for debugging.

OCD connector diagram: Connect OCD with user system

Figure 1.1 Debugger(OCD1/OCD2) and Pin description

Subject

MC96F6432S

MC96F6432 (Evaluation chip)

Internal LCD bias dividing resistor

(Chapter 11.15 –LCD driver)

60kΩ and 120kΩ selectable

–Added the IRSEL bit in the LCDCRL register

–Added LCD contrast formula with 120kΩ

60kΩonly

Full-flash erase mode method

(Chapter 15 –Flash memory)

Sector erase mode

Sector and byte erase mode

Table 1.2 Difference between MC96F6432S and evaluation chip (MC96F6432)

User VCC

User GND

DSCL

DSDA

MC96F6432S

ABOV Semiconductor Co., Ltd.

1.3.3 Programmer

Single programmer:

E-PGM+ : It programs MCU device directly.

Figure 1.2 E-PGM+(Single writer)

MC96F6432S

ABOV Semiconductor Co., Ltd.

Gang programmer: E-GANG4 and E-GANG6

- It can run PC controlled mode.

- It can run standalone without PC control too.

- USB interface is supported.

- Easy to connect to the handler.

Figure 1.3 E-GANG4 and E-GANG6 (for Mass Production)

MC96F6432S

ABOV Semiconductor Co., Ltd.

1.4 MTP programming

1.4.1 Overview

The program memory of MC96F6432S is MTP Type. This flash is accessed by serial data format. There are four

pins(DSCL, DSDA, VDD, and VSS) for programming/reading the flash.

Table 1.3 Descriptions of pins which are used to programming/reading the Flash

1.4.2 On-Board programming

The MC96F6432S needs only four signal lines including VDD and VSS pins for programming FLASH with serial

communication protocol. Therefore the on-board programming is possible if the programming signal lines are ready at

the PCB of application board is designed.

1.4.2.1 Circuit Design Guide

At the FLASH programming, the programming tool needs 4 signal lines that areDSCL, DSDA, VDD, and VSS. When

you design the PCB circuits, you should consider the usage of these signal lines for the on-board programming.

Please be careful to design the related circuit of these signal pins because rising/falling timing of DSCL and DSDA is

very important for proper programming.

Pin name

Main chip

pin name

During programming

I/O

Description

DSCL

P01

Serial clock pin. Input only pin.

DSDA

P00

I/O

Serial data pin. Output port when reading and input port when programming.

Can be assigned as input/push-pull output port.

VDD, VSS

Logic power supply pin.

MC96F6432S

ABOV Semiconductor Co., Ltd.

To application circuitDSCL(I)

DSDA(I/O)

R1 (2kΩ~ 5kΩ)

To application circuit

R2 (2kΩ~ 5kΩ)

VDD

VSS

E-PGM+, E-GANG4/E-GANG6

NOTE) 1. In on-board programming mode, very high-speed signal will be provided to pin DSCL and DSDA.

And it will cause some damages to the application circuits connected to DSCL or DSDA port if the

application circuit is designed as high speed response such as relay control circuit. If possible, the

I/O configuration of DSDA, DSCL pins had better be set to input mode.

2. The value of R1 and R2 is recommended value. It varies with circuit of system.

Figure 1.4 PCB design guide for on board programming

MC96F6432S

ABOV Semiconductor Co., Ltd.

2 Block diagram

XRAM

768B

IRAM

256B

Flash

32KB

ISP

In-system programming

Power control

Power on reset

Low voltage reset

Low voltage indicator

Power down mode

Clock generator

16MHz, Internal RC OSC

12MHz, Crystal OSC

32.768kHz, Crystal OSC

LCD driver

21 segments

Buzzer

1 channel, 8-bit

UART

2 channels, 8-bit

SPI

3 channels, 8-bit

I2C

2 channels, 8-bit

CORE

M8051

General purpose I/O

9 ports normal I/O

33 ports LCD shared I/O

Watchdog timer

1 channel, 8-bit

5kHz, internal RC OSC

Basic interval timer

1 channel, 8-bit

Timer / Counter

1 channel, 8-bit

2 channels, 16-bit

2 channels, 8-bit

or 1 channel, 16-bit

ADC

16 Input channels, 12-bit

PWM

6 channels

Figure 2.1 Block diagram of MC96F6432S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Abov Mikrocontroller Handbücher

Abov

Abov A96G140 Bedienungsanleitung

Abov

Abov MC96FR116C Series Bedienungsanleitung

Abov

Abov A31T216RLN Bedienungsanleitung

Abov

Abov A96T418GDN Bedienungsanleitung

Abov

Abov MC95FG208 Series Bedienungsanleitung

Abov

Abov MC96FR364B Bedienungsanleitung

Abov

Abov MC97F2664 Bedienungsanleitung

Abov

Abov EW8051 Bedienungsanleitung

Abov

Abov A96G174 Bedienungsanleitung

Abov

Abov MC96FM204 Bedienungsanleitung

Abov

Abov 8-bit MCU Bedienungsanleitung

Abov

Abov MC95FG0128A Bedienungsanleitung

Abov

Abov A31G213CLN Bedienungsanleitung

Abov

Abov MC96F6432 Series Bedienungsanleitung

Abov

Abov MC97F60128 Bedienungsanleitung

Abov

Abov MC96F8204 Series Bedienungsanleitung

Abov

Abov MC97F6108A Bedienungsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Abov

Abov MC96F6432A Bedienungsanleitung

Abov

Abov A96G140 Bedienungsanleitung

Abov

Abov A96G150 Bedienungsanleitung

Abov

Abov MC80F0304 Bedienungsanleitung

Abov

Abov A96G140 Bedienungsanleitung

Abov

Abov A31G213CL2N Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung