Abus SHGW10000 Bedienungsanleitung

S H G W 1 0 0 0 0

Q U I C K G U I D E

ABUS Security-Center • Linker Kreuthweg 5 86444 Affing •Germany •

abus.com

ABUS Z-Wave Gateway SHGW10000 Quickguide

Installing the Gateway

Supported Smartphone System Version:

iOS: iPhone or iPad

Requires iOS 6.0 or later

Android Smartphone or Tablet

Requires Android 4.0 or later

Step 1: Download the ABUS Z-Wave One APP

Step 2: Add the Gateway

Click on the „Add a gateway“ and follow the

further instructions in the app.

Step 3: Login

Press the Gateway icon to log in to the

Gateway.

Assign a secure administrator access now by

entering an admin account name and

password.

Step 4: Add a Z-Wave Component

To add a Z-Wave device into the Gateway

(Inclusion), follow the steps below:

1. Set the gateway inclusion mode

a. Press "Component"

b. Press „+“

c. Choose between ABUS devices or

other devices

d. Follow the inclusion steps of the

respective device

2. When the gateway detects the Z-

Wave component, a "Di" tone is

output.

3. After you have assigned a name to

the component, the gateway

confirms the successful inclusion with

a success tone.

Note: If the inclusion failed, check whether The Z-

Wave frequency of the device is the same as of the

Gateway (EU). It may be necessary to exclude the

device before attempting to include it again. Select

the "-" symbol in the component view here and

perform the exclusion procedure.

ABUS Z-Wave Gateway SHGW10000 Quickguide

Step 5: Add a new room

1. Press the „Room“ Icon

2. Press „+“

3. Assing a name

After a room has been created, included

devices can be added to it. To do this, either

go to the room overview and press “+” to

add device or assign the room in the device

overview.

If temperature, humidity and/or brightness

sensors have been added to a room, the

respective values are displayed as a preview

in the room overview. If there are several

devices with the same parameter, you can

choose which value shall be displayed in

the preview.

Step 6: Create a new scene

Up to 60 scenes can be created on each

gateway, each scene consists of

IF/THEN/WHEN elements.

"IF"

is the condition under which the scene

is to be triggered, up to 6 conditions per

scene are possible. These can be and/or

based. The "IF" conditions can be set

according to the status of the Z-Wave

devices, Smartvest, room conditions or

gateway status.

"THEN"

are the actions of the scene, up to 6

actions are possible per scene. The "THEN"

actions can be applied to Z-Wave devices,

Smartvest, room actions or gateway status.

"WHEN"

allows the scene to check different

conditions which conditions can be, e.g.

always, every day, every week or during a

certain period of time. When no time

interval is assigned, the condition “always”

will be applied automatically.

ABUS Z-Wave Gateway SHGW10000 Quickguide

FAQ

What should I do if I have forgotten my

password?

During operation, press the reset button on

the back of the device for five seconds. The

gateway then restores the standard admin

access and standard network configuration

(DHCP).

How do I exclude a device from the

component list if it is defective or lost?

If your device can no longer establish a

connection to the gateway, it can be

removed from the gateway by pressing the

following ICON:

Note: If a device does not respond for more

than 24 hours, the symbol appears

Why my device cannot be included?

1. Make sure that your Z-Wave gateway

and the device communicate on the

same frequency.

2. Your device may already be

connected to another Z-Wave

network, so try an exclusion first.

3. The battery of the device is empty.

What is the default admin login?

Standard admin user: admin

Standard admin password: _____ (empty)

Scope of delivery

Gateway

ID / Password Card

Quickguide

Ethernet Cable

Power Supply 5V / 1,5A

(DC-Stecker: 3,5 x 1,35mm)

Product description

Z-Wave LED-Indicator

Netzwerk LED-Indicator

Status LED-Indicator

Reset-Button

Power Supply (5V DC / 1A)

LAN-interface

Speaker

Reset – Factory Default

To completely reset your Z-Wave Gateway to factory

settings, connect to the device using the ABUS Z-

Wave One App. Open the configuration and select the

option "Z-Wave Factory Settings" in the admin area.

If this controller is the primary controller for your

network, resetting it will result in the nodes in your

network being orphaned and it will be necessary

after the reset to exclude and re-include all of the

nodes in the network. If this controller is being used

as a secondary controller in the network, use this

procedure to reset this controller only in the event

that the network primary controller is missing or

otherwise inoperable.

ABUS Z-Wave Gateway SHGW10000 Quickguide

Z-Wave configuration

Association group

Group

No.

Max.

Nodes

Description

Z-Wave Plus Lifeline, report

Device Reset Locally when

reset

Device Detection

Added device will detect automatically,

users can control it (on/off, change color,

lighting, etc.) and watch information

(battery, meter, etc.) via Z-Wave ONE App.

Different brands

Z-Wave enabled device can be included and

excluded normally. Included devices will

show on device list. All non-battery

powered nodes can act as repeaters

regardless of manufacturers.

Basis command

Basic command is useful in a scene.

Replication

Controller can transmit protocol replication

data automatically.

About Security

This controller is a security enabled Z-Wave

Plus product. If necessary, it will use

encrypted Z-Wave Plus messages to

communicate to other security enabled Z-

Wave Plus products.

BASIC SET

For unknown device, press device icon will

show on/off icon, select on/off and press

ok will send BASIC SET 0xff/0x00.

Z-Wave Command Classes

Supported Z-Wave Command Classes:

COMMAND_CLASS_ZWAVEPLUS_INFO _V2

COMMAND_CLASS_VERSION_V2

COMMAND_CLASS_ASSOCIATION_GRP_INFO

COMMAND_CLASS_ASSOCIATION_V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

COMMAND_CLASS_SECURITY

COMMAND_CLASS_SECURITY_2

COMMAND_CLASS_DEVICE_RESET_LOCALLY

COMMAND_CLASS_APPLICATION_STATUS

COMMAND_CLASS_POWERLEVEL

COMMAND_CLASS_CONTROLLER_REPLICATION

COMMAND_CLASS_BASIC

COMMAND_CLASS_CRC_16_ENCAP

COMMAND_CLASS_TRANSPORT_SERVICE_V2

COMMAND_CLASS_SUPERVISION

Controlled Command Classes:

COMMAND_CLASS_BASIC

COMMAND_CLASS_SECURITY

COMMAND_CLASS_SECURITY_2

COMMAND_CLASS_ASSOCIATION_GRP_INFO

COMMAND_CLASS_ASSOCIATION_V2

COMMAND_CLASS_WAKE_UP_V2

COMMAND_CLASS_MULTI_CHANNEL_V4

COMMAND_CLASS_SWITCH_BINARY

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

COMMAND_CLASS_SENSOR_BINARY_V2

COMMAND_CLASS_SENSOR_MULTILEVEL

COMMAND_CLASS_METER

COMMAND_CLASS_COLOR_CONTROL

COMMAND_CLASS_DOOR_LOCK

COMMAND_CLASS_NOTIFICATION_V4

COMMAND_CLASS_BATTERY

COMMAND_CLASS_SENSOR_ALARM

COMMAND_CLASS_INCLUSION_CONTROLLER

COMMAND_CLASS_CRC_16_ENCAP

Eine alternative Inbetriebnahme sowie detaillierte Informationen erhalten

Sie in der Bedienungsanleitung erhältlich auf der Website:

abus.com/product/SHGW10000

Vous trouverez une alternative de mise en service ainsi que des

informations détaillées dans le manuel d’utilisateur disponible sur le site

Internet : abus.com/product/ SHGW10000

Een alternatieve ingebruikname en gedetailleerde informatie vindt u in de

gebruikershandleiding op de website: abus.com/product/SHGW10000

Per informazioni su una messa in funzione alternativa o sui dettagli del

prodotto, consultare le istruzioni per l‘uso disponibili all‘indirizzo:

abus.com/products/SHGW10000

An alternative installation as well as detailed information can be found in

the user manual which is available on the website:

abus.com/product/SHGW10000

Alternativ idrifttagning samt detaljerede oplysninger findes i

betjeningsvejledningen, som findes på hjemmesiden:

abus.com/product/SHGW10000

Informacje dotyczące alternatywnych sposobów uruchomienia oraz

dodatkowe szczegóły znajdują się w instrukcji obsługi, którą można pobrać

na stronie: abus.com/ product/SHGW10000

En el manual de instrucciones disponible en nuestra página web podrá

consultar una puesta en funcionamiento alternativa, así como información

más detallada. abus.com/product/SHGW10000

Alternativ idrifttagning samt detaljerad information finns i bruksanvisningen

som kan

hämtas på webbsidan: abus.com/product/SHGW10000

Andere Handbücher für SHGW10000

Andere Abus Tor Handbücher

Abus

Abus SHGW10000 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung