acaia Cinco Bedienungsanleitung
Using Your Cinco
FW 1.0.012
The instructions in this operation manual apply to Acaia Cinco Scale. You have purchased a quality
precision weighing scale that requires handling with care. Make sure to read through this operation
manual prior to using the scale.!
Acaia Cinco Operation Manual
Disclaimer
Calibrate your scale using a calibration weight of the appropriate tolerance (class F1or F2). A scale
can only be as accurate as the standard masses or weights used for calibration. For more details,
please read Calibration Mode section in the operation manual.
CAUTION:
1. Any modification made without the consent of the manufacturer will result in the
warranty being voided.
2. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.!
Contents
4 Chapter 1: Scale at a Glance
4 Introduction
4 Specification
5 Scale overview
6 Accessories
6 Buttons
7 LED indicators
7 Battery charge
8 Chapter 2: Getting Started
8 Preparation
9 Charging and Setup
10 Chapter 3: Basics
10 Basic operations
10 Modes
10 Mode 1 - Weighing mode
11 Mode 2 - Dual Display Mode
12 Mode 3 - Auto Start Mode
13 Chapter 4: Calibration
13 Calibration mode
14 Chapter 5: Configuration
14 Enter settings
15 Auto Sleep Settings
15 Zero Tracking Setting
15 Key Sound Settings
15 Zero Range Setting
15 Weighing filter setting
15 Default Weighing Unit [default=g]
15 Power Saving Mode
15 Weighing Mode Setting [ nodE_1 ] [default]
15 Dual Display Mode Setting [ nodE_2 ]
16 Auto Start Mode Setting [ nodE_3 ]
16 Bluetooth ON/OFF [default=ON]
17 Appendix
17 Error codes
Chapter 1: Scale at a glance
Identification
The instructions in this operation manual apply to the Acaia Cinco. You have purchased a quality
precision weighing scale that requires handling with care. Make sure to read through this operation
manual prior to using the scale.
"Acaia Cinco Scale "Micro-USB Cable
"Acaia Cinco Carrying Case "Acaia 5th Anniversary Pin Set
"Acaia Scale Weight 100g
Follow the instructions in Preparation and Installation sections in the manual to get started.
To take advantage of its many features, carefully read through the operation manual containing
step-by-step guides, examples, and other information.
Warning: Incorrect handling of this product could possibly result in personal injury or
physical damage.
Specifications
Aprox. Weight
70g
Capacity
500g / 17.636oz
Measuring Units
g , oz
Weighing Range 1
Maximum capacity
300.00g
10.582oz
Minimum capacity
0.01g
0.0005oz
Division
0.01g
0.0005oz
Weighing Range 2
Maximum capacity
500.00g
17.636oz
Minimum capacity
300.00g
10.582oz
Division
0.02g
0.001oz
Indication Limit
515.00g / 18.166oz
Unit Dimensions
65mm (W) x 65mm (L) x 13mm (H)#
Electrical Requirements
5V/500mA
Power and Battery
Lithium-ion rechargeable 3.7V 310mA
Display
8 digit LED
Top
Aluminum construction with acrylic window,#
touch sensitive buttons#
Bottom
Aluminum construction
Connectivity
Bluetooth 4.0
Chapter 1: Scale at a glance 4
Scale Overview
"
Accessories
"
"
Linearity
+/-2d ( d=0.01g for 0g~300g, d=0.02g for
300g~500g)
Work Time
Up to 7 hours
Starting Weight
1d
Error Range
0.02g
Chapter 1: Scale at a glance 5
Scale Back
Micro-B USB port
Tare Key
Scale Front
Power Key
LED Display
Weighing Pan
Acaia Scale Weight
100g
Micro USB
Charging Cable
Buttons
*Please find Chapter 3: Basics for more details.
Chapter 1: Scale at a glance 6
Button
Function
Example
Turn on
Press and hold for 0.5 seconds to turn on the scale.
Turn off
Double-tap the power button to turn off the scale.
Switch mode (Default)
While the scale is turned on, press and hold for 1 second to switch
modes: Weighing Mode / Dual Display Mode / Auto Start Mode.
Start/Stop/Reset Timer
While in Dual Display Mode, tap to start/stop/reset timer
Back
While in Settings, press to go back to Weighing Mode(Default
Setting).
Tare
While in Weighing Mode/ Dual Display Mode / Auto Start Mode,
press to perform tare operation.
Toggle units
Long Press to switch between Gram and Ounce in Weighing Mode.
Switch option
While in Settings, tap to advance through settings options. While in
settings, tap to toggle options in sub menus.
Reset
While in Auto Start Mode, double tap to reset the mode.
Confirm
While in Settings, press and hold for 2 seconds to confirm the
option selected in a sub menu.
Enter calibration modes
While in Weighing Mode, rapidly tap T button to enter Calibration
Mode.
LED Indicators
"
Battery Charge
You can charge the battery by plugging the USB cable to any power supply listed below:
A computer USB port
A cell phone charger with a micro USB connector, an output of 5 Volts and 1 Amp is
recommended
An automotive cell phone charger with a USB port or a Micro USB cable
A wall-charger with an output of 5 volts and 1 amp is recommended
The scale takes 1-2 hours to fully charge from an empty battery. You can charge the battery
more frequently so that it will never hit empty.
Battery percentage can be viewed via Brewmaster.
It is not recommended to let the battery run out completely before charge.!
Chapter 1: Scale at a glance 7
Chapter 2: Getting Started
Preparation
%
This scale is intended for indoor use.
%
The scale will function best when used in a stable, vibration-free, and level environment.
Do not use the scale near magnets or equipment that contains magnets. Avoid using the scale
near equipment that creates strong electrical interference.
Avoid storing or using the scale in places with large temperature changes. Temperatures
above 40C (104F) and below 15C (59F) may result in weighing inaccuracy.
Chapter 2: Getting Started 8
Charging and Setup
Plug the USB cable into the Micro-B USB port on the scale’s back panel for charging.
Note: To avoid affecting the accuracy of the scale, do not use the scale during charging
Long press power button to turn on the scale.
* It is highly recommended to calibrate the scale with the calibration weight before using.
Chapter 2: Getting Started 9
Chapter 3: Basics
Basic Operations
Modes *To Enable/Disable Modes Please see Chapter 5: Configuration.
Mode 1 - Weighing Mode
Mode 2 - Dual Display Mode
Mode 3 - Auto Start Mode
"
Mode 1 - Weighing Mode
In the Weighing Mode, the scale will only display weight, in either grams or ounces.
Display
1. There are two different weighing units in Weighing Mode: gram and ounce.
2. The readability is 0.01g for grams and 0.0005 oz for ounces.
Action
Operation
Turn On Scale
Press and hold power button
Turn Off Scale
Double Tap Power Button
Switch Mode
Press and hold power button while scale is on
Tare Weight
Tap T button
Toggle Units G/Oz
Long press T button
Action
Operation
Tare Weight
Tap T
Toggle Units G/Oz
Long Press T
Switch Modes
Long Press Power Button
Chapter 3: Basics 10
Inhaltsverzeichnis
Andere acaia Skala Handbücher
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia AC001 Bedienungsanleitung
acaia
acaia Pearl S Bedienungsanleitung
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia pearl coffee scale Bedienungsanleitung
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia AP009 Bedienungsanleitung
acaia
acaia lunar Installationshandbuch
acaia
acaia Pearl S Bedienungsanleitung
acaia
acaia PS001 Bedienungsanleitung
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia Pearl Technisches Datenblatt
acaia
acaia Pearl Bedienungsanleitung
acaia
acaia Pearl S Bedienungsanleitung
acaia
acaia AC002 Bedienungsanleitung
acaia
acaia lunar Bedienungsanleitung
acaia
acaia lunar Bedienungsanleitung
acaia
acaia Coffee Scale Bedienungsanleitung
