Accordance Systems Araid 5000 Bedienungsanleitung

User's Manual V1.3

I. Safety and Cautions 3

1. Introduction of RAID 0 and RAID 1 3

2. Directions for Use 3

II. Product Content and Accessories 4

III. Introduction of the Product 5

1. Product Features 5

2. Product Specifications 6

3. System Requirements 6

4. Description of Components 7

IV. ARAID Setup 8

1. Hardware installation 8

2. Starting and Operation (for RAID 1 Mode only) 10

3. Local Monitoring 12

4. Network Management (Linux version is for optional purpose) 12

5. Checking for ARAID 5000 compatible drives 13

V. ARAID T5000 (External model) 14

1. Description of Components 14

2. Types (Host Interface) of ARAID T5000 15

VI. ARAID LCD Message Comparison Table (for RAID 1 User) 16

VII. FAQ (for RAID 1 User) 18

VIII.Product Warranty and After-Service 20

IX. Contact Us 21

Thank you for purchasing our product.

・Before using, please read this user's manual carefully in order to set up correct and

safe operation.

・This user's manual at an accessible location for easy reference whenever required.

・The specifications and the appearance of this product may change subject to

improvements without prior notice.

Table of Contents

Accordance and ARAID are registered trade marks of Accordance Systems Inc.

www.accordancesystems.com www.accordance.com.tw

User's Manual

Tables

Table 1: RAID 0 vs RAID 1 3

Table 2: Product Content and Accessories 4

Table 3: ARAID 5000 Specifications 6

Table 4: Hardware Installation Steps 8

Table 5: Starting and Operation 10

Table 6: Specifications of ARAID T5000 14

Table 7: Types of ARAID T5000 External Model 15

Table 8: ARAID LCD Message Comparison Table 16

Table 9: PQR Product Error Report Sheet 21

Figures

Fig. 1: Checking the Hard Disk Quality with ARAID EYE PLUS software 3

Fig. 2: Installing Hard Disk for the Optional Tray 4

Fig. 3: Front View of ARAID 5000 7

Fig. 4: Rear View of ARAID 5000 7

Fig. 5: Hardware Installation Steps 9

Fig. 6: ARAID EYE PLUS 12

Fig. 7: Network Management System 12

Fig. 8: Front View and Rear View of ARAID T5000 14

I.Safety and Cautions

＊

(1) RAID 0: Using two hard disks, the usable capacity is two hard disks. However,

 there’snobackupmechanism,itwouldbeimpossibletoretrievethedataonceit

is lost or damaged.

(2) RAID 1: Using two hard disks, the usable capacity is one hard disk with backup

mechanism. If one of the hard disks is damaged, then the other one immediately

takes over operation.

＊Distinction of RAID 0 and RAID 1 (two 8TB hard disks as an example)

(2) When using the ARAID, you are not required to process the new hard disk with

FDISK and FORMAT steps in advance, and you will be able to execute the

backup of hard disk directly with the automatic rebuilding function.

(3) Before using, be sure to confirm that the power equipment is properly connected

and stabilized to ensure the product will operate smoothly.

(4) If smoke or abnormal odor is emitted from ARAID, disconnect the power

immediately.

(5) Do not place the ARAID on an uneven surface.

(6) If in RAID 0 mode do not change the front panel switch to the “Single” position as

this may lead to a permanent loss of the data stored in the hard disk.

(1) It is suggested that same

type of new hard disk (same

brand, same model, same

capacity, same origin and

same firmware version) should

be used for working with this

product.You may use the

ARAID EYE PLUS software

included on the CD to check

the quality of the hard disks.

However, it is suggested that

you should prepare several of

the same and new hard disks

for backup. If the same hard disk is not available, you may use a larger-capacity

hard disk of the same brand.

Introduction of RAID 0 and RAID 1

Directions of Use

RAID Level Available Capacity Backup Hard Disk Function

0 16TB No

1 8TB Yes Table 1: RAID 0 vs RAID 1

Fig. 1: Checking the Hard Disk Quality with

ARAID EYE PLUS software

User's Manual

II. Product Content and Accessories

(1) Upon receiving, please check the items contained in the box. If any loss or

damage is found, contact your dealer or sales representative immediately.

(2) Optional Tray: If you want to use the same tray on both ARAID 5000 and ARAID

3500, please purchase this optional tray to use. Also refer below for the

installation of hard disk.

For ARAID 5000. Lock with hard disk

facing toward the FRONT END of the

tray.

For ARAID 3500. Lock with hard disk

facing toward the REAR END of the tray.

ARAID 5000 x 1 3.5” Hard Disk Tray x 2 Key for Tray x 4

M3x5mm Screw (for ARAID) x 8 M6x4mm Screw (for Tray) x 8

User’sManualx1

RS232 External Cable x 1 RS232 to USB Cable x 1

RS232 Internal Cable x 1

Management Programs CD x 1

Monitoring Program:

ARAID EYE PLUS

Network Management:

SNMP Agent for Windows

Firmware Upgrade Program:

Utility v0.50.9-5

Table 2: Product Content and Accessories

Fig. 2: Installing Hard Disk for the Optional Tray

III. Introduction of the Product

＊

1. Product Features

Safety:

(1) When using RAID 1 mode, the content of both hard disks will maintain

synchronous status.

(2) A 6cm silent and cooling fan.

(3) Safety lock and key for the drive trays

(4) If ARAID uses with two hard disks, it can provide an off-line hard disk anti-virus

function under Single Disk Mode. (refer Page 18, Q2 of FAQ)

Convenience:

(1) When setting at RAID 0 Mode, it provides maximum drive performance.

(2) Supports most of the PC operating systems without the need of installing

additional drivers.

(3) Connects with SATA port of PC directly without going through a converter card.

(4) Support AHCI Mode and S.M.A.R.T.

(5) Works with most hard disk brands.

(6) Supports hard disk Hot-Swap and Hot-Plug.

Man-Machine Interface:

(1) The LCD displays system, hard disk, fan, and temperature status.

(2) The LED displays read/write activity.

(3) Includes an audible alarm (buzz) to alert of hard disk failure and abnormal status

of the fan and temperature.

Monitoring Interface:

(1) Provides real-time or simulated RS-232 port and dedicated communication

protocol through a connection with a COM or USB port.

(2) Provides SNMP function for standard network management support.

User's Manual

＊

3. System Requirements

(1) Computer Interface: Connect the ARAID to a SATA III (6Gbps) port for maximum

performance. Backwards compatible with SATA II (3 Gbps) and SATA I (1.5

Gbps) ports.

(2) Hard Disk Interface: The SATA III (6Gbps) hard disk is suggested to demonstrate

the optimal efficiency. Backwards compatible with SATA II (3 Gbps) drives.

(3) Supported operating system (requires no additional drivers): Windows (XP only

supports AHCI Mode), Linux, SCO UNIX, FreeBSD, NetWare, Solaris, MAC OS

and QNX, etc.

＊

2. Product Specifications

Table 3: ARAID 5000 Specifications

Dimensions 195mm (D) / 146mm (W) / 86mm (H)

Weight (w/o hard drives) Approx. 0.7kg

Temperature

Operating temperature: 0°C~65°C

Storage temperature: -20°C~70°C

Power Required +5V, +12V

Power Consumption Approx. 2.84W

(w/o hard disk)

Front View

1. LCD Display: Displays the information

relating to hard disk, fan and

temperature status.

2. Mode Selector Switch (Single/Dual):

Select Single or Dual mode.

3. Upper Hard Disk LED (HD1 R/W):

LED flashes when upper hard disk is

reading or writing the information.

4. Lower Hard Disk LED (HD2 R/W):

LED flashes when lower hard disk is

reading or writing the information.

5. Audible alarm (Buzzer On/Off): Press

this switch to temporarily disable the

alarm and press again to re-enable the

alarm.

Rear View and description

of Jumper settings

＊

4. Description of Components

1 2

Front View

1 2 3

Fig3: Front View of ARAID 5000

Fig4:Rear View of ARAID 5000

1. 6cm silent and cooling fan.

2. UR1:RS232 port (for USB).

3. R1:RS232 port (for COM Port)

4. SATA III data connector:Connects to

the SATA port of the computer.

5. SATA power connector:Connects to

 thecomputer’sSATApowersupply.

6. Jumper Setting:

7. Power Connector (4-pin power

 connector):Connectstocomputer’s 

4-pin power supply.

8. Fan Power Connector

Mode 0 1

RAID 0 Close Open

RAID 1 Open Close

User's Manual

＊

1. Hardware installation

IV. ARAID Setup

(1) Disconnect the computer power source.

Connect the 3-pin RS232 Internal Cable to R1 of ARAID 5000 and attach to the

COM port of RS232 internal cable to the rear panel of the computer housing.

Next, connect the COM port and ARAID COM port of the computer with the

included RS232 External Cable.

1. If your computer has no RS-232 port, connect the 4-pin RS232 Internal Cable

to UR1 of ARAID 5000 and attach the COM port of the RS232 internal cable

to the rear panel of the computer housing. Next, connect the COM port and

ARAID COM port of the computer with RS232 to USB cable.

2. Install the provided USB-to-RS232 driver. After installing the provided driver

program, you may use the RS- 232 simulation function provided by USB Port

(normally set as following the COM3)

Caution: If your COM port is built-in to the motherboard, please

purchase your own COM port cable

(2) Connect with physical RS-232 Port:

(3) Connect the simulated RS-232 through a USB port

(ignore this step if you completed step 2 above.)

(4)SettheARAID5000intothecomputer’sopendrivebayswiththeprovided

screws and connect power cable and signal cable, and then replace the

computer cover.

Table 4: Hardware Installation Steps

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Accordance Systems Lagerung Handbücher

Accordance Systems

Accordance Systems araid M300 Bedienungsanleitung

Accordance Systems

Accordance Systems ARAID M500 Bedienungsanleitung

Accordance Systems

Accordance Systems araid 3500 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Accordance Systems araid 5000 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken