AccuBANKER AB-5000 MG/UV Bedienungsanleitung
AB-5000 MG/UV
USER GUIDE
MANUAL
DE USUARIO
pag.
21
pg.
03
ENGLISH
ESPAÑOL
AccuBANKER and its logo are registered trademarks or trademarks of Hilton Trading Corp. All
Rights Reserved.
Thank you for purchasing this igital Bill Counter.
This User Guide compiles all the relevant instructions about
the use and operation of the AB-5000 MG/UV.
We recommend the new user to read the manual
thoroughly, in order to get familiarized with the controls and
operation of the unit.
ENGLISH
4-8
Getting Started
AB 5000 MG/UV BILL COUNTER
Table of Contents
Parts
Function Controls
Operation
Troubleshooting
Specifications
9
10-11
12-14
15-18
19
20
AB 5000 MG/UV Fe tures
One of the most advanced bill counters available today, the
has been the talk of the industry since we
first introduced it in the market. Equipped with a fully
computerized mechanism, the boosts
variable counting speeds, digital task programming and dual
means of counterfeit detection.It is also equipped with an
acrylic molded cover to protect the user from the dust
generated by the fast counting action. Stylish yet affordable,
the will make the most efficient and cost-effective
device to help in counting,sorting and detecting counterfeit
currency in any environment where moneys are used.
AB-5000 MG/UV
AB-5000 MG/UV
AB-5000
"
Getting St rted
!
!
!
!
!
!
!
!
!
!
!
Convenient and easy to operate
Fast andaccuratecounting
Twostarting modes (Auto/Manual)
Three counting speeds (fast,normal and slow)
Three changeable banknote condition levels
Batchandfreecountingmode
Addition counting mode
etection of paper bill size
Counterfeit note detection system (magnetic and UV)
ustproof cover
Error/trouble message display
Getting St rted
#
Import nt S fety Instructions
W rning
o not use this product in areas where it may be
exposed to water or other liquids.
Unplug this product from the wall outlet before
cleaning. o not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
To reduce the risk of electric shock, do not
disassemble this product.Take it to qualified service
personnel when service or repair work is required.
Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect re-
assembly can cause electric shock when the
appliance is subsequently used.
When using the Bill Counter, basic safety precautions should always be followed to reduce the risk of fire,
electric shock or injury to persons, including the following:
Only use the cable provided with the unit.The use of
other cables may result in electric shock, fire or cause
serious damage to the unit.
o not operate the unit in areas with high
temperature or high humidity since it may prevent it
from working correctly (refer to the specifications in
page 20).
C ution
When unplugging the power plug,do not pull it by
the cord but rather grip the plug to pull it out. Not
following these instructions may result in electric
shock, fire or damage to the unit.
o not use the unit if the power cord is damaged or if
the plug socket contact is loose. Not following these
instructions may result in electric shock, fire or other
hazards.
o not place heavy objects over the cord and do not
bend it excessively since it could get damaged.Not
following these instructions may result in electric
shock, fire or other hazards.
When not using the unit for a long period of time,
remove the power plug from the wall outlet.
Read and understand all of the instructions.
Follow all warnings and instructions marked on the
unit.
The slots and openings in the back or bottom of the
case,are provided for ventilation, to protect the unit
from overheating. These openings should never be
blocked or covered by placing the product on the
bed,sofa, rug, or similar surfaces.This product should
never be placed near or over a radiator or heat
register.This product should not be placed in a built-
in installation unless proper ventilation is provided.
This product should be operated only from the type
of power source indicated in the user guide.If you
are not sure of the type of power supply in your
location, consult your dealer or local power
company.
This product is equipped with a three wire
grounding type plug, a plug having a third
(grounding) pin.This plug will only fit into a
grounding type power outlet.This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace the outlet. o not
try to defeat the safety purpose of the grounding
type plug.
Other S fety Consider tions
$
Getting St rted
1
2
3
4
5
Never push objects of any kind into the unit through
case slots, since they may touch dangerous voltage
points or shortcut parts, resulting in a risk of fire or
electric shock. Never spill liquids of any kind on the
product.
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
When the power supply cord or plug is damaged
or frayed.
If liquid has been spilled into the unit.
If the unit has been exposed to rain or water.
If the unit does not operate normally by following
the operating instructions. Adjust only those
controls that are covered by the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to normal operation.
If the product has been dropped or the case has
been damaged.
If the product shows a noticeable change in
performance.
!
!
!
!
!
!
6
7
Getting St rted
Box Contents
When opening the box verify that all the items described below have been included.If any item is missing or
damaged,contact the dealer where you purchased the unit.
Bill Counter Unit Power c ble UV l mp
A box containing one (1) UV
lamp replacement.
Only use the cable provided
with the product.The use of
other cables may result in
electric shock, fire or cause
serious damage to the unit.
'
Cle ning nd M inten nce
&
Getting St rted
1
2
3
4
Attention!
Clean the unit with the power OFF, only.
o not use chemicals/abrasives to clean the
unit.
Since the sensors in this unit are of the optical type,
miscounting may be caused if paper particles,dust,
dirt, stain, and other materials get stuck or clutter the
counting sensors. Also,it may be difficult to start the
counting operation if the repeat and/or the auto-start
sensor are cluttered with dust, paper particles,etc.
For effective operation of the unit, it is necessary to
clean all the sensors shown in the picture on the left
with a dry brush, periodically or as needed.
ue to the optical nature of the sensors in the unit,
exposure to any direct light source should be avoided.
Since the machine uses a roller friction system, keep
small objects such as pins, clips, necklaces or hair
away from it to prevent them to get stuck in the
mechanism. Clean the hopper and stacker with a dry
brush or cloth, periodically or as needed.
It is important to keep the UV lamp clean by pulling
and pushing the UV lamp cleaning-shaft.
SENSORS
T ble of Contents
'
Contents
P rts
Function control
Oper tion
Troubleshooting
Specific tions
Turning the power ON
Banknote physical condition selector
Counting mode
Adding mode
Halting and resuming mode
Auto/MNL (manual) starting mode
Thickness adjustment dial
ust proof cover function
Size of currency detection function
Counterfeit note detection
- UV detection function
- Magnetic detection function
10
12
15
19
20
15
15
15
16
16
16
16
16
17
17
18
18
P rts
P rts
Hopper
Auxili ry Hopper Pl tes
UV L mp Cle ning Sh ft
Thickness Adjustment Screw
St cker
Power Switch
Power Inlet
Fluorescent Detection Sensitivity Adjustment Lever
Place the notes to be counted in this compartment.
Aid to help position the notes correctly to be fed into the unit.
Built-in device that cleans the UV lamp.
Used to make the counting operation smooth.The thickness adjustment is factory defaulted (for more
information, refer to the Operation section, point 7).
The counted notes are stacked in this compartment.
Used to turn the power on or off.
The supplied power cord should be connected to the power inlet first.The other end should be
connected to the AC power outlet.
The fluorescent detection sensitivity can be adjusted by sliding this lever up or down (for more
information refer to the Operation section, point 10 a).
Inhaltsverzeichnis
Sprachen:
Andere AccuBANKER Banknotenzähler Handbücher
Beliebte Banknotenzähler Handbücher anderer Marken
Safescan
Safescan 2660-S Bedienungsanleitung
PRO Intellect Technology
PRO Intellect Technology PRO 95U Bedienungsanleitung
Dors
Dors 600 Bedienungsanleitung
radiotec
radiotec rapidcount S 575 Bedienungsanleitung
CUMMINS ALLISON
CUMMINS ALLISON JetScan Bedienungsanleitung
PRO Intellect Technology
PRO Intellect Technology 40 NEO Bedienungsanleitung
Conrad
Conrad 75 17 78 Bedienungsanleitung
Total
Total M2300U Schulungshandbuch
Double Power Electronics
Double Power Electronics DP-8120VB Bedienungsanleitung
ratiotec
ratiotec Soldi Smart Plus Gebrauchs- und Pflegehandbuch
Olympia
Olympia NC 455 Bedienungsanleitung
Plaisio
Plaisio Q-CONNECT QCD11 Bedienungsanleitung