ACD M260SE Bedienungsanleitung
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 1 / 33
Brief Overview/Resumen breve
M260SE Set (M260SE/DS260)
U.S. Edition 2016/EE. UU. Edición 2016
Version: 1.00
© 2015 ACD Group
All Rights Reserved/Todos los derechos reservados
This document may not be duplicated or made accessible to
third parties without written permission by ACD.
Este documento no se puede reproducir ni facilitar a
terceros sin consentimiento por escrito de ACD.
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 2 / 33
Table of Contents/Índice
English
1Scope of Delivery.........................................................................................3
2Intended Use................................................................................................4
3Handling.......................................................................................................5
3.1 Prior to the initial Commissioning of the M260SE..................................................... 5
3.2 Handling of the Device and Docking Station ............................................................ 7
3.2.1 Charging the Power Supply Unit for the DS260 & M260SE................................8
3.2.2 Replacing the battery in the Handheld Terminal M260SE................................... 8
3.2.3 Inserting the M260SE into the DS260 ................................................................. 9
3.2.4 Removing the M260SE from the DS260..............................................................9
3.2.5 Switching on the M260SE Handheld Terminal.................................................. 10
3.2.6 Suspend Mode...................................................................................................10
3.2.7 Switching off the M260SE Handheld Terminal.................................................. 11
3.2.8 Status of the DS260 Docking Station LEDs.......................................................11
3.2.9 µSD card............................................................................................................12
3.2.10 RFID...................................................................................................................12
4Cleaning and Maintenance Information......................................................13
4.1 Display .................................................................................................................... 13
4.2 Charging and Communication Contacts................................................................. 13
5Service and Spare Parts ............................................................................14
6Manufacturer Representations and Warranties .........................................15
Espanol
8Volumen de suministro...............................................................................18
9Uso previsto ...............................................................................................19
10 Manipulación..............................................................................................20
10.1 Antes de la primera puesta en funcionamiento del M210SE..................................20
10.2 Manipulación del dispositivo y de la estación de carga..........................................22
10.2.1 Carga de la unidad de alimentación de la DS210 y del M210SE......................23
10.2.2 Inserción de la batería en el terminal de mano M210SE................................... 23
10.2.3 Inserción del M210SE en la DS210...................................................................24
10.2.4 Encendido del terminal de mano M210SE ........................................................ 24
10.2.5 Modo de suspensión..........................................................................................25
10.2.6 Apagado del terminal de mano M210SE...........................................................25
10.2.7 Estado de los LED de la estación de carga DS210...........................................26
11 Información de limpieza y mantenimiento..................................................27
11.1 Pantalla...................................................................................................................27
11.2 Contactos de carga y comunicación.......................................................................27
11.3 Lector, cámara y ventana de luz de la cámara.......................................................27
12 Asistencia técnica y piezas de repuesto.....................................................28
13 Declaración de conformidad FCC ..............................................................29
14 Declaraciones y garantías del fabricante ...................................................30
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 3 / 33
1 Scope of Delivery
The package contains the following items:
1 Device incl. battery
2 Replacement battery (optional)
3 Battery charger (optional)
4Docking station (optional)
5Connection kit for docking station –two parts (optional)
6Brief overview M260SE Set (M260SE/DS260) (quick start manual)
Check package for completion and possible damages.
Figure 1: Package content
ATTENTION
The M260SE battery is a lithium polymer battery pack. Lithium
polymer battery packs can explode if exposed to fire. Do not
disassemble the battery pack and do not expose it to fire or heat
(greater than 140 °F).
ATTENTION
Never position the device in close proximity to heat sources
(heating fans or similar equipment) and never expose it to direct
sunlight, excessice dust sources or shocks.
ATTENTION
The touch pen may only be used for operation of the touch screen.
It should not be used for any other purposes.
1
2
4
5
6
5
3
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 4 / 33
2 Intended Use
The M260SE Set (M260SE/DS260) data acquisition system is a solution for the mobile acquisition and
transfer of data. Do not use the system in geographical areas where explosives may be used.
Observe all warning information regarding the use of wireless devices.
The supplied connection kit (see Point 1) is only intended for use with the M260SE Set.
NOTE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can emit radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference
with certain radio communications.
NOTE
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 5 / 33
3 Handling
Read all instructions first before using the M260SE!
Do not drink any alcohol or take any drugs while using the M260SE
and follow the saftey instructions carefully!
3.1 Prior to the initial Commissioning of the M260SE
In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into
the supplied DS260 docking station (if included in the scope of delivery), also see Section 3.2. Using the
supplied power supply unit, connect the docking station to the mains (Power LED shows a green light), also
see Section 3.2.
The battery charging process has been completed when the 'CHARGE' LED is green.
You can now use the M260SE handheld terminal.
You can see the battery charging process in Figure 2.
ATTENTION
Only original ACD power supply units and ACD-approved batteries
may be used for the operation of the M260SE and the DS260. The
utilization of non-approved components can lead to the
destruction of the device. Remove the battery from the device if it
is not used for an extended period of time.
ATTENTION
The M260SE battery is a lithium polymer battery pack. Lithium
polymer battery packs can explode if exposed to fire. Do not
disassemble the battery pack and do not expose it to fire or heat
(greater than 140 °F).
ATTENTION
Prior to each use, the mobile data acquisition terminal, the docking
station and the connection cables must be inspected for damages.
Damaged parts must be replaced. Please contact ACD in either
case.
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 6 / 33
1 2 3
Figure 2: Charging Process
1: 1. Faint Green LED: Docking station has power and no device is inserted.
2: 1. Green LED: Docking station has power and the device is inserted.
2. Red LED: The battery in the device is charging.
3: 1. Green LED: Docking station has power and the device is inserted.
2. Green LED: The battery in the device is fully charged.
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 7 / 33
3.2 Handling of the Device and Docking Station
Read all instructions first before using the M260SE!
Do not drink any alcohol or take any drugs while using the M260SE
and follow the saftey instructions carefully!
ATTENTION
Only operate the touchscreen using the fingertips or with the
touch-pen attached to the retainer strap on the rear. Never use a
pen or other sharp objects.
ATTENTION
Never position the device in close proximity to heat sources
(heating fans or similar equipment) and never expose it to direct
sunlight, excessive dust sources or shocks.
ATTENTION
In order to prevent excessive heat, the terminal, as well as the
docking station and the power pack must not be covered while in
use.
ATTENTION
Make sure there is no risk of stumbling over connection cables or
power packs.
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 8 / 33
3.2.1 Charging the Power Supply Unit for the DS260 & M260SE
The M260SE and the spare battery may only be charged in the DS260 docking station with the respective
power supply unit.
External power supply unit for DS260
Input voltage ~100 –240 V AC; 0.8 A; 50 –60 Hz
Output voltage 15 V DC; 2.4 A
Power cable (country-specific)
ATTENTION
Unintended use of the interfaces should be avoided.
3.2.2 Replacing the battery in the Handheld Terminal M260SE
The battery compartment is located on the rear of the device. In order to remove the battery, first remove the
transverse hand strap by simply unhooking it. Now push the locking tab on the battery towards the battery
surface (Figure 3.). The battery can now be removed from the tab.
The battery can easily be inserted. In doing so, ensure that you insert the battery at a slight incline towards
the contacts and hook it on the fixing tab whilst doing so. Then close the locking mechanism with a slight
amount of pressure.
Figure 3: Inserting the Battery
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 9 / 33
3.2.3 Inserting the M260SE into the DS260
Figure 4: Inserting the M260SE into the DS260
3.2.4 Removing the M260SE from the DS260
Figure 5: Removing the M260SE from the DS260
ATTENTION
Place the docking station correctly on a smooth and clean
underground, which is not exposed to direct sunlight.
M260SE_Brief_Overview_FCC_V1.00_en_es.docx 10 / 33
3.2.5 Switching on the M260SE Handheld Terminal
In order to switch on the device, press the “C” button and the “orange enter” button to the right of “0”
simultaneously until the LED beneath it lights up. You can then release the buttons. The desktop of your
operating system or your usual work environment appears on the display.
You can see the buttons, you have to press to switch on the device as shown in Figure 6.
Figure 6: Switching on the M260SE
3.2.6 Suspend Mode
In suspend mode, the operating system and the application running on it are stopped. The display is
switched off and consequently becomes dark. Suspend mode can be accessed by simultaneously pressing
the “C” button and the “orange enter” button to the right of “0”. Upon leaving suspend mode (switching on the
M260SE), the application and the operating system starts to run from the same point. Thanks to both
measures, the M260SE only uses a small amount of power.
Figure 7: Suspend Mode of the M260SE
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ACD Handheld Handbücher
