ACDC Dynamics PBU-1000W-UPS Bedienungsanleitung

PORTABLE

POWER STATION

USER MANUAL

Recommended to fully charge PBU-1000W-UPS before use

PBU-1000W-UPS

www.acdc.co.za

National Sales Centre - 010 202 3400 | Technical - 010 202 3500 www.acdc.co.za THINK ELECTRICAL

GENERAL SPECIFICATIONS

The is a portable battery pack with the ability to supply 1000W of pure

sine wave AC power via the onboard AC output. Additionally, The PBU-1000W-UPS is able

to support USB quick charging via the onboard 1 x USB PD port and 3 x USB A ports.

Overall storage capacity is 999Wh of energy.

Rated Output Power

1000W

Rated capacity

999Wh

Standard capacity

3.7V/270000mAh

Peak AC output

2000W

AC continuous output

1000W

Output waveform

pure sine wave

USB output

QC3.0/18W * 3

Output Type-C

PD100W * 1

Cigarette Lighter Socket Output

12V-14V/10A

DC 55*2.1 output

12V-14V/5A* 2

AC input

500W(184-264V 5.7A Max)

Anderson input

400W(12-75V 12A Max)

Working temperature

10-40°C

Weight (net weight)

9.3kg

Weight (including accessories)

11.2kg

Product size

328*221*263mm

Operating Temp

14 to 104°F (-10 to 40°C)

Charging Temp

32 to 104°F (0 to 40°C)

Storage Temp

4to 113°F (-20 to 45°C)

PBU-1000W-UPS

WARNINGS

To ensure safe operation and service , follow these

instructions. Failure to observe these warnings can result in

severe injury or death.

•DO NOT use in excess of its output rating. Overload outputs above

rating may result in a risk of fire or injury to persons, even though we have built-in

overload protection.

•DO NOT use , if it is damaged or has been modified. Damaged or

modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk

of injury.

•DO NOT subject to vibration, impacts, or drops. Secure during transport.

The housing may not show signs of damage, but internal components may have been

compromised. It is advisable to replace it if any such severe events occur.

•DO NOT expose to moisture, rain, or snow.

•DO NOT charge, use or store in a bathroom or in an area exposed to rain

or moisture.

•DO NOT leave children or the persons, who with reduced physical/sensory or mental

capabilities/or lack of experience and knowledge, along with unless they

have been given supervision or instruction concerning use of it by a person responsible for

their safety.

•DO NOT attempt to repair . There are no user-serviceable

components inside.

•DO NOT handle with wet hands.

•DO NOT place on its side or upside down while in use or in storage.

•If rust, odor, overheating, or other abnormal circumstance are observed, stop using

and contact intelligentenergy customer service.

•Children should be supervised to ensure that they DO NOT play with the

alone.

• The is only used for emergency power station, it cannot replace

the standard AC or DC power of household appliances or digital products.

•Keep away from high voltage electrical fields.

• Risk of fire and burns, DO NOT open, crush, heat above 113°F (45°C) or

incinerate. Follow all instructions.

•Use of a power supply, charger, or cable not recommended or sold by portable

battery manufacturer may result in a risk of fire or injury to persons.

•Should fluid from inside of come in contact with your skin or clothing,

wash the affected areas with tap water.

•The accessories included in the box should only be used with the .

•KEEP THIS PRODUCT AWAY FROM PETS.

PBU-1000W-UPS

BUTTON FEATURE

FEATURE DETAILS

1.SOS MODE & LED light2.Cigarette Lighter Output 3.Anti-collusion Strip

4.DC Output 5.1000W Rated AC Output 6. USB Output

7.LCD Screen Display 8. logo 9. Handle

10.straps hooks 11.Air Intake Vent with Cooling Fan

12.Solar Charging Input 13.AC input

Note: No user-serviceable parts inside.

Recommended to fully charge the before use.

1. Power ON/OFF Button 2.USB Output Power ON/OFF Button

3.SOS mode & LED light Button 4.AC Output Power ON/OFF Button

5.SOS mode & LED light Button 6. DC Output Power ON/OFF Button

PBU-1000W-UPS

A.Battery Level Indicator B. total Outputs Status C.LED Status

D.AC Outputs Status E.UPS Status F.abnormality Status

G.USB Outputs Status H.DC Outputs Status I.LED Status

J. Inputs Status

By solar panels

400W (12-75V 12A Max)

about 3-5 hours

depending on solar conditions

By Car Port 12V 10A

about 11-13 hours when car running

From Wall Charger 230V

2.5-3.5 hours

LCD FEATURES

HOW TO CHARGE

WHAT IT POWERS

Laptops (41.4Wh)

32" TV(60W)

CPAP without heated

Go pro (5.9Wh)

Floodlight(4W)

Around

humidifier (15W)

Around

19 Recharges

13 hours

53hours

135 Recharges

200 hours

+MORE

Mini Fridge(40W)

DJ Drone(89.2Wh)

Smartphone(10Wh)

Switch(16Wh)

Around

20 hours

9 Recharges

80 Recharges

50 Recharges

Uninterruptible Power Supply (UPS)

This product supports an uninterruptible power supply (UPS) function. The unit's

battery will be bypassed while fully charged and connected to the grid via AC

charging cable. In other words, anything you plug into the AC port will pull directly

from the grid rather than the battery. In a power outage , this product can automati-

cally switch to the battery powered mode within 10ms.

Note: The function does not support 0ms switching. Therefore, it is not recommend-

ed to be used as a UPS for highly sensitive equipment, such as data services and

workstations without confirming compatibility or proper testing before use. It is also

recommend to only use the UPS function for one device at a time to avoid overload

protection, VIGOPROOL assumes no responsibility ans is therefore not lable for

data loss or damage caused by the use of this product in setups that it was not

intend for and the disregard of this recommendation.

FUNCTION BUTTONS

POWER ON/OFF

SOS MODE & LED LIGHT

DC OUTPUT POWER ON/OFF

USB OUTPUT POWER ON/OFF

Function available only when the Button ①activate .

Firstly, press Button one time ③or ⑤to turn on the LED light and get 3W;

Secondly, press button ③or ⑤again to make LED light brighter at 5W

Thirdly, press button ③or ⑤thirdly to turn on the SOS mode;

Fourthly, press Button ③or ⑤to turn on the sharp-flash, one more time again will

turn off the light.

If both LED lights have been activated, press button ③or just button ⑤can control

both LED light at the same time. If you want to power both LED off, needs to press

both buttons ③and ⑤.

The DC output port will NOT function until the appropriate Button ①&⑥are both

pressed to activate.Press Button ⑥to shut down the output(s)When not in use.

The USB output port will NOT function until the appropriate Button ①&②are both

pressed to activate.Press Button ②to shut down the output(s) When not in use.

The USB C output port will NOT function until the appropriate Button ①&②are both

pressed to activate.

The USB C cable of different devices need different endorsements of corresponding

protocols, if the USB C port didn't work, try to use the AC output port.

Button ①is the master switch. Press Button ①to activate all buttons.

Press Button ①to shut down the output(s)When not in use.

PBU-1000W-UPS

AC OUTPUT POWER ON/OFF

The AC output port will NOT function until the appropriate Button &are both

pressed to activate.

Press Button to shut down the output(s)When not in use.USB C OUTPUT(4)

COOLING FAN(12)

PORTABLE POWER STATION utilizes an internal cooling fan to

ensure the product is operating within the appropriate temperature range. PORTABLE

POWER STATION , when it experiences a higher output load, will

automatically turn on the fan. During discharge, and possibly charging, the fan may

operate intermittently to keep internal temperature within operating range. The fan will

likely start when the AC circuit is activated to ensure proper operation.

PBU-1000W-UPS

DETAILS DISPLAYED ON LCD

BATTERY LEVEL INDICATOR :

Thebattery level is showing by percentage ofbattery.

charge corresponding to the number of bars and percentage displayed. The

segments in the battery level correspond to the current state of charge, 0-10% one

segment, 11-20% two segments, 21-30% three segments, 31-40% four segments,

41-50% five segments, 51-60% six segments, and so on, all ten are lit when

charge level is above 91%.

Provides the user live telemetry data on time to completely charge, or deplete the

battery based upon the energy entering or leaving the battery.

Highly recommend to fully charge PORTABLE POWER STATION when

first use. Higher battery level indicator show, more precise data will indicate.

PLEASE BE AWARE thatthis value can adjust multiple times as the energy draw

changesfrom the connected devices. This is evident during initial activation of ports

with a connected device.

RECOMMENDED back to charge the PORTABLE POWER STATION

when battery indicate less than 20%. Note that when you first plug in a power

source, whether it's a solar panel or a wall charger, the PORTABLE POWER

STATION may take a minute to detect and adjust its charge

circuitry before it starts drawing power from the source.

INPUT Status J: The is capable of providing input energy in watts.

DC Output Status H: The display will provide output watts of the DC port on position of B.

AC Output Status D: The display will provide output watts of the AC port on position of B.

The output watts of USB port will display on the LCD Screen B position.

LCD Screen will enter sleep mode after 180 seconds of inactivity (no new output load

detected), and will "wake up" when inputting a charging cord or when any button is

pressed.

PBU-1000W-UPS

CHARGING PORTABLE POWER STATION

Connect the provided AC power cord to Input, and allow PORTABLE POWER

STATION to fully charge prior to use, approx. 2.5 - 3.5 hours.

When charging, the LCD Screen will be illuminated, and the LCD display will

provide Battery level Indicator A , PORTABLE POWER STATION

is fully charged when the level is 100%. It is recommended to fully

charge PORTABLE POWER STATION every 3 months to

maintain the health of the battery pack.

PBU-1000W-UPS

Inhaltsverzeichnis

Andere ACDC Dynamics Stromversorgung Handbücher

ACDC Dynamics

ACDC Dynamics CPS-150B Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung