ACDelco ARI810 Maßzeichnung

ARI810

IMPACT WRENCH

PRODUCT INFORMATION MANUAL

Manuel informations du produit

Manual información del producto

English

Français

Español

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,

OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT.

CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTE CONCERNANT LA

SECURITE, L'OPERATION, LA MAINTENANCE ET LE STOCKAGE DE CE

PRODUIT.

ESTE MANUAL CONTIENE INFORMACIÓN IMPORTANTE ACERCA DE LA

SEGURIDAD, FUNCIONAMIENTO, MANTENIMIENTO Y ALMACENAMIENTO DE

ESTE PRODUCTO.

DO NOT ATTEMPT TO OPERATE THE TOOL UNTIL YOU HAVE READ AND UNDERSTOOD ALL

INSTRUCTIONS AND SAFETY RULES CONTAINED IN THIS MANUAL. FAILURE TO COMPLY

MAY RESULT IN ACCIDENTS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL

INJURY. SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE AND REVIEW IT

FREQUENTLY FOR SAFE OPERATION.

NE PAS TENTER D'OPERER L'OUTIL TANT QUE VOUS N'AVEZ PAS LU ET COMPRIS TOUTES

LES INSTRUCTIONS ET REGLES DE SECURITE CONTENUES DANS CE MANUEL. SINON VOUS

RISQUEZ DES ACCIDENTS TELS QU'UN INCENDIE, UNE ELECTROCUTION, OU DES

BLESSURES CORPORELLES GRAVES. CONSERVEZ CE MODE D'EMPLOI EN CAS DE BESOIN ET

RELISEZ-LE SOUVENT POUR UTILISER VOTRE OUTIL EN TOUTE SECURITE.

NO UTILICE ESTA HERRAMIENTA HASTA HABER LEÍDO Y COMPRENDIDO TODAS LAS

INSTRUCCIONES Y NORMAS DE SEGURIDAD CONTENIDAS EN ESTE MANUAL. SI NO LO

HACE PODRÍA PROVOCAR ACCIDENTES CON FUEGO, DESCARGA ELÉCTRICA O LESIONES

PERSONALES SERIAS. GUARDE ESTE MANUAL DE INSTRUCCIONES PARA SU CONSULTA EN

EL FUTURO Y REVÍSELO FRECUENTEMENTE PARA UN USO SEGURO.

40732478-NA

1English1

English -1

THANKS FOR CHOOSING THIS PRODUCT

ACDelco provides you with products at an affordable price, and we would like you to

be fully satisfied with this product and our technical support. If any help or advice is

needed, please kindly contact us.

INTENDED USE

This tool is intended for personal use only.

This Impact Wrench is designed to remove and install threaded fasteners.

GENERAL SAFETY RULES

READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury. The term "power tool" in all of the warnings

listed below refers to your mains-operated (corded) power tool or battery-operated

(cordless) power tool.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

The safety instructions provided in this manual are not intended to cover all possible

conditions and practices that may occur when operating, maintaining and cleaning

power tools.

Always use common sense and pay particular attention to all the DANGER,

WARNING, CAUTION and NOTE statements of this manual.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

NOTE provides additional information that is useful for proper

use and maintenance of this tool. If a NOTE is indicated make

sure it is fully understood.

DANGER

NOTE

CAUTION

WARNING

1English1

English -2

WARNING LABEL IDENTIFICATION

Read Manuals Before Operating Product.

Wear Eye Protection.

Wear Hearing Protection.

Wear Dust Mask.

Wear Respiratory Protection.

Power tools can vibrate in use.

Do not carry the tool by the cord.

Keep body stance balanced and firm. Do not overreach when operating this

tool.

IMPORTANT SAFETY RULES

When using power tools, always prevent exposure and breathing of harmful

dust and particles.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and

other construction activities contains chemicals known to the State of California to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area,

and work with approved safety equipment, such as dust masks that are specially

designed to filter out microscopic particles.

WARNING: Handling the power cord on corded products may expose you to lead, a

chemical known to the State of California to cause cancer and birth defects or other

reproductive harm. Wash hands after handling.

DANGER

1English1

English -3

WORK AREA

Keep work area clean and well lit. Cluttered and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Use safety equipment. Always wear eye protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these devices can

reduce dust-related hazards.

WARNING

1English1

English -4

TOOL USE AND CARE

Use clamps or other practical way to secure and support the workpiece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will

do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it on or off. A tool that cannot be

controlled with the switch is dangerous and must be repaired.

Disconnect battery pack from tool or place the switch in the locked or off

position before making any adjustments, changing accessories, or storing the

tool. Such preventive safety measures reduce the risk of starting the tool

accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

When battery pack is not in use, keep it away from other metal objects like:

paper clips, coins, keys, nails, screws, or other small metal objects that can make

a connection from one terminal to another. Shorting the battery terminals together

may cause sparks, burns, or a fire.

Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools with sharp cutting edge are less likely to bind and are easier to

control.

Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the tool's operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may create a risk of injury

when used on another tool.

CAUTION

1English1

English -5

BATTERY TOOL USE AND CARE

Ensure the switch is in the off position before inserting battery pack. Inserting

the battery pack into power tools that have the switch on invites accidents.

Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of fire when used with another

battery pack.

Use power tools only with specifically designated battery packs. Use of any other

battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal objects like

paper clips, coins, keys, nails, screws, or other small metal objects that can make

a connection from one terminal to another. Shorting the battery terminals together

may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery; avoid contact.

If contact accidentally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the battery may cause irritation

or burns.

SERVICE

Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained

Tool service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel may result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instructions

in the Maintenance section of this manual. Use of unauthorized parts or failure to

follow Maintenance Instructions may create a risk of shock or injury.

CAUTION

1English1

English -6

SPECIFIC SAFETY RULES AND SYMBOLS

Hold tool by insulated gripping surfaces when performing an operation where

the cutting tool may contact hidden wiring. Contact with ’live’ wire will also

make exposed metal parts of the tool ’live’ and shock the operator.

Be aware that this tool is always in an operating condition, because it does not

have to be plugged into an electrical outlet. Always set the trigger switch to the

locked OFF position when installing or removing the battery pack or bits.

Do not use bits or sockets larger than those recommended. Large bits or drills

may overload the wrench/driver and damage the motor and gears.

Do not use if chuck jaws or other parts are cracked or worn.

Never change direction of rotation until motor has completely stopped.

Never hold work in your hand, lap, or against other parts of your body when

driving.

Do not use drill as a router or try to elongate or enlarge holes by twisting the

drill bit. Drill bits may break and cause injury.

Keep hands away from rotating parts.

Keep drill bit clear of yourself and all objects while installing and removing bit.

Some wood contains preservatives which can be toxic. Take extra care to prevent

inhalation and skin contact when working with these materials. Request, and follow,

all safety information available from your material supplier.

SYMBOLS

The label on your tool may include the following symbols. The symbols and their

definitions are as follows:

SYMBOL NAME EXPLANATION

V Volts Voltage (potential)

no No Load Speed No-load Rotational Speed

kg Kilograms Weight

Direct Current Type of Current

…/min Revolutions per

Minute

Revolutions, Surface Speed, Strokes, etc.

per Minute

CAUTION

1English1

English -7

FUNCTIONAL DESCRIPTION

CONTROLS AND COMPONENTS:

1. Aluminum Gearbox Housing 2. Anvil (ARI810 : 3/8” | ARI810-2: 1/4”)

3. Built-in LED light 4. Forward / Reverse Control Button

5. Variable Speed Switch 6. Anti-slip Soft Grip

7. Battery Pack Release Button 8. Battery Pack

1English1

English -8

SPECIFICATIONS

Model Number ARI810 ARI810-2

Voltage 8 Vdc

Drive 3/8” Square 1/4” Square

Max. Tightening Torque 75 ft-lbs (100 Nm) 66 ft-lbs (90 Nm)

Max. Reverse Torque 115 ft-lbs (155 Nm) 103 ft-lbs (140 Nm)

No Load Speed 0-2,600 RPM (/min)

Impacts per Minute 0-3,100 IPM

Tool Weight 1.87 lbs (0.85 kg) 1.87 lbs (0.85 kg)

ASSEMBLY

INSTALLING OR REMOVING BATTERY PACK

TO REMOVE BATTERY PACK: Depress the battery pack release button (7) and pull

the battery pack (8) out of tool.

TO INSTALL BATTERY PACK: Push the battery pack (8) onto tool until it locks in

place.

INSTALLING SOCKETS

Always follow the procedure below to install a socket.

1. Insert a socket into the anvil (2).

2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.

REMOVING SOCKETS

Always follow the procedure below to remove a socket.

Always set switch (5) to off position when installing and

removing socket.

CAUTION

1English1

English -9

OPERATION

Always check the direction of the rotation before use.

1. After continuous use, allow the impact wrench to sit idle for 15 minutes before

replacing the battery. The temperature of the motor, switch, etc., will rise if the

work is started again immediately after the battery has been changed, eventually

resulting in burned-out.

2. Place the point of the bolt in the socket. Keep the tool pointed straight at the bolt.

3. Apply forward pressure to the tool to prevent the socket from slipping off the bolt.

4. To start, turn impact wrench/driver on. Always check torque with a torque wrench.

The fastening torque can be affected by many factors including the following:

Voltage: Low voltage due to a nearly discharged battery will reduce the fastening

torque.

Socket Size: Failure to use the correct socket size will cause a reduction in fastening

torque.

Variable Speed Trigger Switch: Operating the tool at a reduced speed will reduce the

fastening torque.

Bolt Size: Larger bolt diameters generally require higher fastening torque. Fastening

torque will also vary according to length, grade, and torque coefficient.

Material: The type of material and surface finish of the material will affect fastening

torque.

Fastening Time: Longer fastening time results in increased fastening torque. Using a

longer fastening time than recommended could cause the screws to be overstressed,

stripped or damaged.

Continuous use in variable speed range is not recommended. It may

damage the switch and should be avoided.

When change the position of the control button, making sure the variable

speed switch is released.

The first time the tool is run after changing the direction of rotation, you

may hear a click on start up. This is normal and does not indicate a problem.

NOTE

Inhaltsverzeichnis

Sprachen:

Beliebte Schlagschrauber Handbücher anderer Marken

Chicago Pneumatic

Chicago Pneumatic CP734H Series Bedienungsanleitung

Milwaukee

Milwaukee 0779-20 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP8272 Series Bedienungsanleitung

kincrome

kincrome K13204 Bedienungsanleitung

Napa

Napa 775-0111A Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP8272 Series Bedienungsanleitung

Makita

Makita TW0200 Bedienungsanleitung

MasterCraft

MasterCraft 54-2733-6 Konfigurationshandbuch

Chicago Pneumatic

Chicago Pneumatic CP7780 Series Bedienungsanleitung

Jet

Jet JNS-5030 Handbuch

Chicago Pneumatic

Chicago Pneumatic CP7640 Series Bedienungsanleitung

Sunex Tools

Sunex Tools SX670A Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP7748 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP7749 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP7759 Series Bedienungsanleitung

Jet

Jet JSM-403 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP749 Series Bedienungsanleitung

Aircat

Aircat 1994 Bedienungsanleitung