ACEFAST D5 Bedienungsanleitung
D5
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –8
Čeština
9 –14
Slovenčina
15 –20
Magyar
21 –27
Deutsch
28 –33
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Product Diagram
•Press the key on the back side to automatically open the clamp and to take out
the phone.
Dashboard base
Back clip
Dry & wet tissue
Sticky base
Press
Air vent clip
5
Specifications
Model
D5
Size
Back clip size: 110x68.5x52.5mm / 4.33x2.70x2.06in
Clamp inner width (max. / min.): 55-96mm / 2.16-3.78in
Center console holder size: 167x72.5x40mm / 6.57x2.85x1.57in
Air vent clip size: 94x45x37mm / 3.70x1.77x1.45in
Weight
Total weight of the product is about 190g / 6.70oz
Material
Plastic, silicone, metal alloy
Getting Started
A sticker base is included for use on leather or uneven surfaces. The mount itself can be
adhered to the sticker base and more easily removed later for use in another place or
vehicle. If reusing the mount in this way, you can slightly dampen the adhesive surface
of the mount to renew stickiness before reapplying.
1. Clean a preferably flat surface on your dashboard where you want to install the
mount with a mixture of equal parts (1:1) isopropyl alcohol and water. Let the surface
dry.
2. If you want to attach the mount directly to the surface, skip this step. Otherwise,
carefully peel off the sticker base backing paper and adhere the base to the surface.
Press down firmly and hold for a few minutes to ensure tight adhesion. For best results,
allow 24 hours for the adhesive to securely bond with the surface. Then remove the
plastic film from the top side.
3. Lift the mount locking lever up towards the mount arm. Carefully peel off the mount
base adhesive backing paper and adhere the mount to the sticker base (or directly to
the surface if not using the sticker base). Press down firmly, hold while pushing the
mount locking lever back down again, and continue to hold down for a few minutes to
ensure tight adhesion. For best results, allow 24 hours for the adhesive to securely bond
with the surface before using the mount.
Air vent clip: thanks to the design, it can be easily locked within 1 turn.
Insert and rotate with one hand, easy to install and remove in one step.
1. Insert the blade into the clamp, insert it to the end, (turn clockwise) and lock it tightly.
2. It can be easily taken out by turning it to the end (counterclockwise rotation).
Turn clockwise
Counter clockwise rotation
6
Product Care & Use
•Don’t install the mount in front of the airbags.
•The temperature, pressure, type & cleanness of the surface all affect the time the
adhesive takes to bond.
•The adhesive is designed for permanent adhesion. If you want to remove the
sticker base from your car dashboard in the future, warm with a hair dryer and
use a controlled prying & twisting action while holding the surface down. A
sawing action with ordinary dental floss to cut through the adhesive layer can
also work well.
•Alternatively, use dedicated adhesive removal products.
•If the mount eventually comes unstuck from the sticker base, you can try slightly
dampening the adhesive surface of the mount to renew stickiness before
reapplying to the sticker base or directly to the surface.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
7
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Mobile phone holder
Model / Type: Acefast-D5
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 7.3. 2022
8
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.
9
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod k použití pro budoucí použití.
Zvláštní pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli
dotazy nebo připomínky, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆+420 255 340 111
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
10
Schéma produktu
•Stisknutím tlačítka na zadní straně se svorka automaticky otevře a telefon lze
vyjmout.
Základna na palubní
desku
Zadní
klip
Suché a vlhké ubrousky
Lepící základna
Stisknout
Klip pro odvzdušnění
Inhaltsverzeichnis
Sprachen:
