Acer Nitro VG240Y Series Bedienungsanleitung

ACER Monitor_VG240Y

LIFECYCLE EXTENSION GUIDE

- 2 -

Contents

Important Safety Notice............................................................................3

1. Exploded Diagram................................................................................4

2. Wiring connectivity diagram................................................................5

3. Mechanical Instruction.........................................................................6

4. Assembly and Disassembly SOP ........................................................7

5. Troubleshooting .................................................................................15

6. FRU List...............................................................................................19

Safety No

ice

Any person attempting to service this chassis must familiarize with the chassis and be

aware of the necessary safety precautions to be used when serving electronic equipment containing

high voltage

- 3 -

Important Safety No

ce ACER S190HQL 1

Product Announcement:

This product is certificated to meet RoHS Directive and Lead-Free produced definition. Using approved

critical components only is recommended when the situation to replace defective parts. Vender assumes

no liability express or implied, arising out of any unauthorized modification of design or replacing non-

RoHS parts. Service providers assume all liability.

Qualified Repairability:

Proper service and repair is important to the safe, reliable operation of all series products. The service

providers recommended by vender should being aware of notices listed in this service manual in order

to minimize the risk of personal injury when perform service procedures. Furthermore, the possible

existed improper repairing method may damage equipment or products. It is recommended that service

engineers should have repairing knowledge, experience, as well as appropriate product training per

new model before performing the service procedures.

NOTICE:

! To avoid electrical shocks, the products should be connect to an authorized power cord, and turn off

the master power switch each time before removing the AC power cord.

! To prevent the product away from water or exposed in extremely high humility environment.

! To ensure the continued reliability of this product, use only original manufacturer’s specified parts.

! To ensure following safety repairing behavior, put the replaced part on the components side of PWBA,

not solder side.

! To ensure using a proper screwdriver, follow the torque and force listed in assembly and

disassembly procedures to screw and unscrew screws.

! Using Lead-Free solder to well mounted the parts.

! The fusion point of Lead-Free solder requested in the degree of 220°C.

1. Exploded Diagram

2. Wiring connectivity diagram

3. Mechanical Instruction

Tools Required

List the type and size of the tools that would typically can be used to disassemble

the product to a point where components and materials requiring selective

treatment can be removed.

Tool Description:

working table

Screw-driver

Knife

glove

cleaning cloth

ESD protection

4. Assembly and Disassembly Procedures

Disassembly Procedure

Step. 1 Pull the base & neck assembly out

Step.2 Unscrew four screws

Step.3 Separate hooks between MID_FRAME and R/C

Step 4. Pull up the Rear Cover and pull out all connectors

Step.5 Unscrew screws on main shielding and disassemble AL tape

Step.6 separate SPK from MID_FRAME and LVDS & Backlight FFC from LCM

Step.7 Unscrew two hex nuts and seven screws and remove main board PCBA from main shielding.

Step.8 Remove connecter cable and separate main board and power board, separate mylar and shielding

Step.9 Unscrew eleven screws and separate MID FRAME and LCM

Step.10 Separate lens from MID frame

Step.11 Unscrew two screws and disassemble key board from rear cover and separate navi key& cable

Step.12 Separate wall-mount BKT and display key from rear cover

Step.13 Unscrew the screw and separate base & neck assembly

Step.14 Remove four silicon rubbers and unscrew seven screws to separate metal and plastic cover

Step 15. Separate back cover from neck , unscrew two screws and separate front cover from hinge assy.

Andere Handbücher für Nitro VG240Y Series

Inhaltsverzeichnis

Andere Acer Monitor Handbücher

Acer

Acer AL732 Bedienungsanleitung

Acer

Acer AL2423 Bedienungsanleitung

Acer

Acer V225HQL Bedienungsanleitung

Acer

Acer V203H Bedienungsanleitung

Acer

Acer AL1931 Bedienungsanleitung

Acer

Acer T230H - Bmidh Wide Touch Screen Display Bedienungsanleitung

Acer

Acer MT200HML Bedienungsanleitung

Acer

Acer V183HL Bedienungsanleitung

Acer

Acer BR7 Series Bedienungsanleitung

Acer

Acer KE242Y Bedienungsanleitung

Acer

Acer Nitro VG240Y Series Bedienungsanleitung

Acer

Acer AF715 Series Bedienungsanleitung

Acer

Acer Veriton M460G Bedienungsanleitung

Acer

Acer X233HZ Bedienungsanleitung

Acer

Acer AL1711 Bedienungsanleitung

Acer

Acer AM501 Bedienungsanleitung

Acer

Acer KC2 Series Bedienungsanleitung

Acer

Acer AL715 Bedienungsanleitung

Acer

Acer X233HZ Bedienungsanleitung

Acer

Acer Nitro QG241Ybii Bedienungsanleitung

Acer

Acer X201W Bedienungsanleitung

Acer

Acer G781 Bedienungsanleitung

Acer

Acer AL1712 Bedienungsanleitung

Acer

Acer X193HQ Series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung