Acer U5200 Series Bedienungsanleitung
1
English
Acer Projector Gateway
Introduction
The Acer Projector Gateway (APG) is a smart, integrated system that enhances
presentations via your Acer projector. The APG provides versatile source
connectivity, the latest eProjection Management tools, support for video
playback via the built-in decoder and more.
APG features:
•High-performance wireless projection via a built-in access point featuring a
lossless CODEC or an RJ-45 port for wired connections.
•Playback of any audio content through the projector's built-in speakers for
added effect.
•Visitors can easily launch Acer eProjection Management automatically by
inserting the Acer Plug-and-Show token (using the Windows autorun
function) into the source’s USB port, or by installing the software via an
Internet browser. A driver disc is not required.
•Presents a user-friendly graphic interface for simple setup and operation.
•Allows presenters to connect to the Internet or corporate Intranet to
retrieve interactive content during presentations.
•Supports up to four presentations at the same time under split-screen
projection mode.
•Supports remote control functions for projector operation.
•Makes wireless or wired connections via 802.11b/g, 802.11b/g/n or an
Ethernet 10/100-based network.
•Acer Projector Gateway Web Management enables a web-based control of
Acer projector for both Windows and Mac OS.
•Wireless network security (WEP, WPA-PSK, WPA2-PSK).
•MobiShow technology allows wireless projection from a Wi-Fi-enabled
smartphone.
•Acer Multiple Projector Control Center is a PC utility which allows one PC
to control all projectors that are connected to a LAN.
•Crestron compliance.
•Media playback via a USB port.
2
English
Guide to components
This table discusses the hardware features of the APG:
Note: The APG provides advanced projector functions when you
enter supervisor mode. Set a supervisor password and enable full
control of system settings with the convenience of remote control.
Note: The antenna is only required for wireless models.
Note: The antenna is not required when a USB Wi-Fi dongle
(optional) installed.
Important: Acer recommends setting up the projector name (SSID)
and supervisor password when using the projector for the first
time.
Note: Projector name (SSID) is only required for wireless models.
#Component Description
1 Mini USB Project PC screen via mini USB (USB B).
2 LAN port Connects to an Ethernet 10/100-based network.
3 USB Type A Connects to USB IODVKGULYH for multimedia playback.
2UFRQQHFWVWRD86%:L)LGRQJOHRSWLRQDO
321
3
English
System Requirements
•Acer eProjection Management software installed or Acer PnS token ready.
Note: Acer PnS token is an optional accessory.
•Computer CPU - Intel Pentium III-800 MHz (or greater).
•Computer memory - 256 MB of RAM required, 512 MB or more
recommended.
•Hard disk - 10 MB of available hard disk space.
•Display - Super VGA supporting 800 x 600, 16-bit high color or higher-
resolution display recommended (PC and display).
•Ethernet adapter (10/100 Mb/s) for an Ethernet connection.
•Video application - Upgrading to Windows Media Player (WMP) v.10 or
above is recommended.
OS support
•Windows Microsoft Windows 2000 with Service Pack 4 or later.
•Windows XP Home or Professional 32-bit Service Pack 3 or later.
•Windows Vista 32- and 64-bit Service Pack 2 or later.
•Macintosh OS V10.5 and above.
•Windows 7 32- and 64-bit.
Browser support
•Microsoft Internet Explorer 6.0 / 7.0 and above.
•Firefox 1.5 / 2.0 and above.
•Safari 4.0 and above.
4
English
Connect to the projector
Before you begin projecting, you will need to do the following things:
Turn on and connect to the network
Press the Power button on the bundled remote control or the device to turn on
your Acer projector and enable the WLAN (only for wireless models or models a
USB Wi-Fi dongle installed). Connecting the projector to the LAN for a wired
connection is also recommended.
LAMP TEMP
SOURCE
RESYNC
MENU
POWER
RESET
USB A1 USB A2
USB B
Cable / ADSL
Modem Internet
APG / AP
DHCP Server
5
English
Check the information on the splash screen
Take note of the important information on the splash screen. The splash screen
displays the following items: Projector ID (a), Acer logo (b), network
information (c) and instructions (d).
Projector ID (displayed only when available)
This 4-digit number will not be displayed on the top left of the splash screen
until this option is enabled by the supervisor in the Configure tab under Acer
eProjection Management. The four digits are given randomly for projector
identification. For more information, please see General Settings on page 27.
Projector Name (SSID)
The Projector Name and initial Service Set ID (SSID) can be added by the
supervisor on the Configure tab of Acer eProjection Management. For more
information, please see Network Settings on page 28.
Server IP
The Server IP indicates the IP address your projector uses to connect to a wired
or wireless network. It will be 192.168.100.10 for general wireless and wired
connections. The Server IP will be assigned by the wired network with DHCP
enabled. For more information, please see Network Settings on page 28.
Security: (None, WEP, WPA-PSK, WPA2-PSK)
Wired Equivalent Privacy or Wireless Encryption Protocol (WEP) is a scheme to
secure wireless networks. It is part of the IEEE 802.11 wireless networking
6
English
standard. WPA-PSK (Wi-Fi Protected Access - pre-shared key) and WPA2-PSK are
other individual encryption methods with higher level security. The option is
enabled by the supervisor in the Configure tab under Acer eProjection
Management. For more information, please see Security Settings on page 29.
Note: Projector name (SSID) and security are only required for
wireless models.
Note: When turning the LAN or Wi-Fi on via the projector OSD,
please remember to change the projector source to "LAN/WiFi".
Use the keypad or remote control to change the projector source.
Follow the instructions on the splash screen to
connect and project
1 Make a note of the Projector ID, Projector Name (SSID), Server IP and
Security option on the splash screen. A secure key needs to be used when
Security is enabled.
7
English
2 Enable your WLAN and select the access point labeled AcerProjector or
AcerProjectorXXXX to connect wirelessly. Connect the projector to your
LAN for a wired connection.
3 Open the Internet browser (see note). Click Download Acer eProjection
Management on the welcome page, and then click Run to launch the
Welcome to the Acer Projector Gateway Setup Wizard. The installation will
proceed automatically. Make sure the installation is complete.
Note: If you do not see the welcome page or cannot connect to
the wired network, please enter the Server IP address (the second
Internet
8
English
item listed under the Acer logo on the splash screen) into your
browser’s address bar.
Note: Ensure that you have administrator-level permission on your
computer so that you can install the software.
Note: If you receive any security warnings, click OK to proceed
with the installation procedure.
Note: The Acer eProjection Management shortcut will be created
in desktop when the installation is complete.
Note: Visitors can also insert the optional Acer PnS token using the
Windows autorun function into a USB port of your system.
Note: If your PC cannot perform the autorun function of the PnS
token, please execute AcerProjectorGatewayW5.exe from the PnS
token manually.
W
i
r
e
l
e
s
s
P
r
o
j
e
c
t
o
r
G
a
t
e
w
a
y
9
English
Note: You can make a PnS token by yourself by clicking the Make
PnS Token button from the CD welcome page. The Acer PnS
Token is a standard accessory on some projector models.
4 Acer eProjection Management will execute automatically and search for
your Acer projector.
Note: Make sure your personal firewall does not block the Acer
eProjection Management application.
5 When the search is complete, a login dialog box will open to ask you to
enter the User name and Projector ID (if needed) to log in to your Acer
Projector.
6 The UI will look as it does below when your source successfully connects
and begins projecting in 1024 x 768 mode.
10
English
Note: For the best projection performance, Acer recommends
adjusting your resolution to 1024 x 768.
Andere Handbücher für U5200 Series
3
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Acer Projektor Handbücher
Acer
Acer TravelMate C110 Series Bedienerhandbuch
Acer
Acer S1370WHn Series Bedienungsanleitung
Acer
Acer X1140A Bedienungsanleitung
Acer
Acer TravelMate 220 series Bedienungsanleitung
Acer
Acer P7505 Series Bedienungsanleitung
Acer
Acer X1626H Series Bedienungsanleitung
Acer
Acer PE-S42 Bedienungsanleitung
Acer
Acer P5530B Bedienungsanleitung
Acer
Acer H5360BD Series Bedienungsanleitung
Acer
Acer PL111 Bedienungsanleitung
Acer
Acer L811 EL8630Ua Series Bedienungsanleitung
Acer
Acer SL 700X/S Bedienungsanleitung
Acer
Acer Z550L Bedienungsanleitung
Acer
Acer PalmPro 7763P Bedienungsanleitung
Acer
Acer PD525D Bedienungsanleitung
Acer
Acer K650i SERIES Bedienungsanleitung
Acer
Acer P3150 Series Bedienungsanleitung
Acer
Acer P3251 Series Bedienungsanleitung
Acer
Acer XS-X13HGM Bedienungsanleitung
Acer
Acer U5200 Series Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
