Package Contents
Ethernet Cable
Vat (×2)
Build Platform
Print Screens (×2) Hex Key
Wi-Fi Dongle
DENTIQ 3D Printer
Power Cable
Product Specifications
Machine Size 25 ×23 ×38 cm
Weight 10.5 kg
Print Size 120 ×68 ×140 mm
XY Resolution 47 μm
Slice Thickness 30 - 150μm
Resin Wavelength 385~405 nm
Power Supply 110-240V AC, 50-60Hz
LCD
3D Print Technology
Setup Guide
Environment
Operate your DENTIQ in a temperature-
controlled room, between 18°-25°C (64°-77°F).
Ackuretta also recommends using UV-filtered LED lights in
your workspace for both printing and cleaning.
Warning
Do not allow any resin or residue to come into contact with the hood on your printer
because 3D printing resins have a corrosive effect on acrylic.
Software
Download and install the Alpha 3D software from the
Ackuretta website:
https://ackuretta.com/dentiq/
Unboxing
1. Lift your printer out by the handles.
2. Remove the vat film sheets and put them in a
safe place.
3. Lift your printer by the base to to remove
it from its internal packaging.
4. Remove the power cable from the
CABLE box and use it to connect your
printer to a power source.
Side Boxes
There are four small boxes in the package and with the
following contents:
VAT: 2 Vats (one vat in place on the printer and another
with the accessories)
PANEL: 2x print screens wrapped in protective packaging
CABLE and TOOLS:1x ethernet cable, 1x power cable and
1x hex key (Allen wrench)
